Nissan ARMADA 2022 Mirrors and Memory Seat

The 2022 Nissan Armada’s memory seat technology and mirrors provide an opulent and practical driving experience. The Armada improves vision and comfort with heated, power-adjustable external mirrors that may also have auto-dimming and power-folding features. Additionally, most cars have memory seat settings that retain numerous driver profiles and enable easily recalled personalized seat and mirror adjustments. The well-considered features of the 2022 Armada not only offer useful benefits but also enhance the driving experience, resulting in a well-rounded SUV that accommodates personal preferences and convenience when traveling.

2023 Nissan Armada Specs, Price, Features, and Mileage (Brochure)

Mirrors

INSIDE MIRROR

Adjust the height and the angle of the inside mirror to the desired position.

Manual anti-glare type (if so equipped) The night position will reduce glare from the headlights of vehicles behind you at night. Use the day position when driving during daylight hours.

WARNING
Use the night position only when necessary, because it reduces rear-view clarity.

Automatic anti-glare type (if so equipped)
The inside mirror is designed so that it automatically changes reflection according to the intensity of the headlights of the following vehicle. The anti-glare system will be automatically turned on when the ignition switch is placed in the ON position. When the anti-glare system is turned on, the indicator light will illuminate and excessive glare from the headlights of the vehicle behind you will be reduced. Push the “*” switch to make the inside rearview mirror operate normally. The indicator light will turn off. Push the “I” switch to turn the system on. Do not allow any object to cover the sensors or apply glass cleaner on them. Doing so will reduce the sensitivity of the sensor, resulting in improper operation.

Intelligent Rear View Mirror (if so equipped)

WARNING
Failure to follow the warnings and instructions for proper use of the Intelligent Rear View Mirror could result in serious injury or death.

• The Intelligent Rear View Mirror is a convenience feature but it is not a substitute for proper vehicle operation. The system has areas where objects cannot be viewed. Check the blind spot of the Intelligent Rear rear-view mirror before vehicle operation. The driver is always responsible for safe driving.
• Do not disassemble or modify the Intelligent Rear View Mirror, the camera unit, or the wirings. If you do, it may result in accidents or fire. In case you notice smoke or smell coming from the Intelligent Rear View Mirror, stop using the system immediately. It is recommended that you see a NISSAN dealer for servicing.
• Do not operate the Intelligent Rear View Mirror while driving. Doing so can be a distraction and it could lose control of your vehicle and cause an accident or serious injury.
• Do not gaze into the Intelligent Rear View Mirror display while driving. It may cause a distraction and it could lose control of your vehicle and cause an accident or serious injury.
• Do not put a cigarette or flames on the Intelligent Rear View Mirror, the camera unit, or the wirings. It may cause a fire.
• Be sure to adjust the Intelligent Rear View Mirror before driving. Switch the system to the conventional rearview mirror mode and be properly seated on the driver’s seat. Then adjust the mirror so as to see the rear window properly. Driving without adjusting the mirror may cause difficulty in watching the display in Intelligent Rear View Mirror mode (camera view mode) due to the reflection from the surface of the mirror.
• If the Intelligent Rear View Mirror malfunctions, immediately switch the system to the conventional rearview mirror mode.
• When strong light (for example, sunlight or high beams from following vehicles) enters the camera, a light beam or a glaring light may appear on the monitor screen of the Intelligent Rear View Mirror. In that case, switch the system to the conventional rearview mirror mode appropriately.
• If dirt, rain, or snow accumulates on the exterior glass surface covering the camera, the Intelligent Rear View Mirror may not display objects clearly. Use of the rear window wiper/washer may improve visibility, but if not, switch the Intelligent Rear View Mirror to the conventional rearview mirror mode until a time the glass covering the camera can be cleaned.

1. MENU button
2. Left button
3. Right button
4. Mode select lever HomeLink® buttons (1-3)

Components:
Intelligent Rear View Mirror provides a clear rear view from a camera located on the rear of the vehicle. Intelligent Rear View Mirror has two modes: conventional rearview mirror mode and Intelligent Rear View Mirror mode (camera view mode). You can switch these two modes by the mode select lever. When the Intelligent Rear View Mirror mode is selected, the indicator is displayed.

How to change the mode:
The mode can be switched when the ignition switch is in the ON position. Pull the mode select lever to switch to the Intelligent Rear View Mirror mode (camera view mode). Push the mode select lever to switch to the conventional rearview mirror mode.

How to make settings of Intelligent Rear View Mirror:
You can choose display settings of the Intelligent Rear View Mirror such as brightness, camera angle, textual indication ON or OFF and language. When the Intelligent Rear View Mirror mode is on, the setting menu can be selected by pushing the MENU button. Each time the MENU button is pushed, the setting menu will change as follows:
MENU (initial screen) ?BRIGHTNESS?DOWN/UP? LEFT/RIGHT? ROTATION? INDICATION? DIMMING MIRROR?LANGUAGE? MENU (initial screen)

NOTE:
To switch the image quality adjustment items with the MENU button, push the button within 5 seconds after completing the adjustment of the previous item. If 5 seconds or more pass, the monitor will return to MENU (initial screen). When one of the HomeLink® buttons is pushed, the monitor will display the HomeLink® screen.

BRIGHTNESS
The brightness of the display screen can be adjusted.

• Push the left button to dim the screen.
• Push the right button to brighten the screen.

DOWN/UP
The vertical camera angle of the display screen can be adjusted.

• Push the left button to down the camera angle.
• Push the right button to up the camera angle.

LEFT/RIGHT
The horizontal camera angle of the display screen can be adjusted.

• Push the left button to move the camera angle to the left.
• Push the right button to move the camera angle to the right.

ROTATION
The camera angle of the display screen can be rotated.

• Push the left button to rotate the camera angle to the left.
• Push the right button to rotate the camera angle to the right.

INDICATION
The textual indication can be turned on or off on the Intelligent Rear View Mirror display screen.

• Push the right button to disable the textual indication on the display screen.
• Push the left button to enable the textual indication on the display screen.

 

DIMMING MIRROR
The mirror is designed so that it automatically changes reflection according to the intensity of the headlights of the following vehicle. You can enable or disable the automatic anti-glare mode.

• Push the left button to enable the automatic anti-glare mode.
• Push the right button to disable the automatic anti-glare mode.

LANGUAGE
The language of the textual indication can be selected on the Intelligent Rear View Mirror display screen. Select the language by using the or button. You can select English, French, or Spanish. The language setting will be retained even if the engine is restarted.

Intelligent Rear View Mirror system precautions:

NOTE:

• Long-term use of this system in stopping the engine may cause the battery to be discharged. Do not attach an antenna of a wireless device near the Intelligent Rear View Mirror. Electric waves from wireless devices may cause disturbing images in Intelligent Rear View Mirror.
• Do not push buttons excessively or operating the lever roughly may cause a system failure or the Intelligent Rear View Mirror itself to drop.
• Never turn the body of the Intelligent Rear View Mirror by 90° or more. It may damage the Intelligent Rear View Mirror.
• Do not apply strong shocks to the
  body of the Intelligent Rear View Mirror. It may cause a system failure.
• Do not apply a heavy load to the camera and camera cover on the rear of the vehicle. It may cause the camera to be removed or may cause a system failure.
• If it is difficult to see the Intelligent Rear View Mirror display screen because of the strong external light, switch the mode to the conventional rearview mirror mode for better use.
• Close the sunshade (if so equipped) when the Intelligent Rear View Mirror display screen is unclear due to strong external light.

Flicker image (example)
When LED headlights are viewed on the Intelligent Rear View Mirror display, the images may flicker. This is normal. Due to diffused reflection from the external environment, images on the screen may flicker. This is not a malfunction. A quick movement of a thing may not be able to be displayed on the camera view screen. This is not a malfunction. Turn on the headlights at twilight or in a tunnel, etc. The Intelligent Rear View Mirror mode (camera view mode) display is different from the conventional rearview mirror. Objects in the display may differ from the actual distance. Do not solely rely on the Intelligent Rear View Mirror. Always rely on your own operation to avoid accidents. If the brightness of the camera view display is adjusted to an excessively bright level, it may cause an eye strain in driving. Adjust the brightness properly. Use the rear window wiper when it rains. If the camera view image is still unclear when the rear window wiper is in operation, check the deterioration of the rear window wiper blade. When using the rear window wiper, images on the screen may flicker. This is not a malfunction. Defog the rear window with a defroster when the rear window is fogged. Use the conventional rearview mirror mode until the rear window is fully deflogged. The display of the Intelligent Rear View Mirror may become hot. This is not a malfunction. The color of an object in the distance or in the dark may be difficult to recognize. This is not a malfunction.

System maintenance (Intelligent Rear View Mirror):
Always keep the mirror and camera area of the rear window clean. Clean the mirror and the camera lens with a dry soft cloth. When cleaning the camera area of the rear window, use a soft cloth dampened with water and a few neutral detergents. And after, dry it up with a dry soft cloth.  If the image on the Intelligent Rear View Mirror display screen is still unclear even after cleaning the camera area of the rear window, an oil film may be adhering to the rear window glass. Clean the rear window glass with an oil film remover. Never use alcohol, benzene, thinner, or any similar material to clean the mirror or camera lens. It will cause discoloration, deterioration, or a system malfunction. Do not attach a sticker (including transparent material) to the camera area of the rear window.

OUTSIDE MIRRORS

WARNING
Objects viewed in the outside mirror on the passenger side are closer than they appear. Be careful when moving to the right. Using only this mirror could cause an accident. Use the inside mirror or glance over your shoulder to properly judge distances to other objects. Do not adjust the mirrors while driving. You could lose control of your vehicle and cause an accident.

Adjusting outside mirrors
The outside mirror control switch is located on the driver’s door armrest. The outside mirror will operate only when the ignition switch is in the ACC or ON position. Move the switch right or left to select the right or left side mirror, then adjust using the control switch.

Defrosting outside mirrors
The outside mirrors will be heated when the rear window defroster switch is operated.

Power foldable outside mirrors

CAUTION
Do not touch the mirrors while they are moving. Your hand may be pinched, and the mirror may malfunction. Do not drive with the mirrors stored. You will be unable to see behind the vehicle. If the mirrors were folded or unfolded by hand, there is a chance that the mirror will move forward or backward during driving. If the mirrors were folded or unfolded by hand, be sure to adjust them again electrically before driving. The outside mirror remote control operates when the ignition switch is in the ACC or ON position. To fold the outside mirrors, push the outside mirror folding switch to the “CLOSE” position. To unfold, push to the “OPEN” position. If mirrors are manually operated or bumped, the mirror body can become loose at the pivot point. To correct electronic mirror operation, cycle the mirrors by pushing “CLOSE” until completely closed, then push “OPEN” until the mirrors are in the open position.

Reverse tilt-down feature (if so equipped)
When backing up the vehicle, the right and left outside mirrors will turn downward automatically to provide better rear visibility.

1. Place the ignition switch in the ON position.
2. Move the shift lever to the R (Reverse) position.
3. Choose either the right or left outside mirror by operating the outside mirror control switch.
4. The outside mirror surfaces move downward.

When one of the following conditions has occurred, the outside mirror surfaces will return to their original positions.

• The shift lever is moved to any position other than R (Reverse).
• The outside mirror control switch is set to the center position.
• The ignition switch is placed in the OFF position.

Automatic anti-glare (if so equipped)
The outside rearview mirrors are designed so that its automatically change reflection according to the intensity of the headlights of the vehicle following you. The anti-glare system will be automatically turned on when the ignition switch is placed in the ON position.

VANITY MIRROR
To use the front vanity mirror, pull down the sun visor and pull up the cover.

SET/memory switches

The memory seat system has three features:

• Entry/exit function
• Memory storage
• Setting memory function

ENTRY/EXIT FUNCTION
This system is designed so that the driver’s seat and steering column will automatically move when the automatic transmission shift lever is in the P (Park) position. This allows the driver to get into and out of the driver’s seat more easily. The driver’s seat will slide backward and the steering wheel will move up when the driver’s door is opened with the ignition switch in the LOCK position. The driver’s seat and steering wheel will return to the previous positions when the ignition switch is pushed to the ACC position. The driver’s seat will not return to the previous position if the seat or steering adjusting switch is operated when the seat is at the exit position.

Cancel or activate the entry/exit function
The shift lever must be in the P (Park) position with the ignition switch in the OFF position. The entry/exit function can be activated or canceled by pressing and holding the SET switch for more than 10 seconds.

The entry/exit function can be canceled through “Vehicle settings” in the vehicle information display by performing the following:

• Switch the “Exit Seat Slide” ON to OFF.
  Switch the “Exit Steering Up” ON to OFF.

Initialize the entry/exit function
If the battery cable is disconnected, or if the fuse opens, the entry/exit function will not work though this function was set on before. In such a case, after connecting the battery or replacing it with a new fuse, open and close the driver’s door more than two times after the ignition switch is turned from the ON position to the LOCK position. The entry/exit function will be activated.

MEMORY STORAGE

Two positions for the driver’s seat, steering column, and outside mirrors can be stored in the memory switch. Follow these procedures to use the memory system.

1. Move the shift lever to the P (Park) position.
2. Adjust the driver’s seat, steering column, and outside mirrors to the desired positions by manually operating each adjusting switch.
3. Push the SET switch and, within 5 seconds, push the memory switch (1 or 2) fully for at least 1 second.
4. The indicator light for the pushed memory switch will stay on for approximately 5 seconds after pushing the switch.
5. When the memory is stored in the memory switch (1 or 2), a buzzer will sound.
6. If memory is stored in the same memory switch, the previous memory will be deleted.

Linking Intelligent Key to a stored memory position
The Intelligent Key can be linked to a stored memory position with the following procedure.

1. Follow the steps for storing a memory position.
2. While the indicator light for the memory switch being set is illuminated for 5 seconds, push the button on the Intelligent Key. If the indicator light blinks, the Intelligent Key is linked to that memory setting.
3. Push the ignition switch to the OFF position, and then push the button on the Intelligent Key. The driver’s seat, steering wheel, and outside mirrors will move to the memorized position.

Confirming memory storage
Push the ignition switch to the ON position and push the SET switch. If the main memory has not been stored, the indicator light will come on for approximately 0.5 seconds. When the memory has stored in position, the indicator light will stay on for approximately 5 seconds. If the battery cable is disconnected, or if the fuse opens, the memory will be canceled. In this case, reset the desired position using the previous procedure. If optional Intelligent Keys are added to your vehicle, the memory storage procedure to switch 1 or 2 and linking the Intelligent Key procedure to a stored memory position should be performed again for each Intelligent Key.

Selecting the memorized position

1. Move the shift lever to the P (Park) position.
2.  Use one of the following methods to move the driver’s seat, the outside mirrors, and the steering wheel.

• Push the memory switch (1 or 2) fully for at least 1 second.
  The driver’s seat, steering column, and outside mirrors will move to the memorized position or to the exit position when the entry/exit function is set to active with the indicator light flashing, and then the light will stay on for approximately 5 seconds.

SETTING MEMORY FUNCTION

The status of the following settings can be linked to the Intelligent Key and the memorized settings can be available for each Intelligent Key.

• Air conditioner system
• Navigation system (if so equipped)
• Audio system

To use the memory function, lock the doors with the Intelligent Key that is linked to the settings.

To enable the memorized settings:

1.  Carry the Intelligent Key that is linked to the settings, and unlock the doors by pushing the driver’s door handle request switch or “UNLOCK” button on the Intelligent Key.
2. Place the ignition switch in the ON position. “Connection with the key has been done” will be displayed on the screen and the memorized settings are available (only when a new Intelligent Key is used).

SYSTEM OPERATION
The memory seat system will not work or will stop operating under the following conditions:

• When the vehicle speed is above 0 MPH (0 km/h) or 4 MPH (7 km/h) for some limited functions such as linking an Intelligent Key to the vehicle when the power source is turned on from off or during the Exit function.
• When any of the memory switches are pushed while the memory seat is operating.
  When the adjusting switch for the driver’s seat and steering column is turned on while the memory seat is operating.
• When the seat has already been
  moved to the memorized position.
• When no seat position is stored in the memory switch.
• When the shift lever is moved from the P (Park) position to any other position.

FAQ