Nissan FRONTIER 2023 Detection and Vents
Modern detection technologies and well-planned ventilation elements are included in the 2023 Nissan Frontier, improving passenger safety and comfort. With cutting-edge features like lane departure warning, front collision warning, and potentially pedestrian detection, the Frontier places a premium on driver awareness and road safety. Furthermore, the car’s air vent system—which may include individual control and rear ventilation on higher trim levels—maintains a comfortable interior that can be adjusted to suit different climate conditions. good air distribution for heating and cooling is made possible by these vents in conjunction with a good climate control system. When taken as a whole, these attributes show Nissan’s dedication to producing cars that are not only sturdy and dependable but also sensitive to the needs of contemporary drivers in terms of comfort and safety.
Moving Object Detection (MOD)
- CAMERA button
- Failure to follow the warnings and instructions for proper use of the Moving Object Detection system could result in serious injury or death.
- The MOD system is not a substitute for proper vehicle operation and is not designed to prevent contact with objects surrounding the vehicle. When maneuvering, always use the outside mirrors and rearview mirror and turn and check the surroundings to ensure it is safe to maneuver.
- The system is deactivated at speeds above 6 mph (10 km/h). It is reactivated at lower speeds.
- The MOD system is not designed to detect surrounding stationary objects.
- The MOD system can inform the driver of moving objects near the vehicle when backing out of garages, maneuvering in parking lots, and in other such instances.
- The MOD system detects moving objects by using image processing technology on the image shown in the display.
MOD SYSTEM OPERATION
The MOD system will turn on automatically under the following conditions:
- When the shift lever is in the R (Reverse) position.
- When vehicle speed decreases below approximately 6 mph (10 km/h) the camera screen is displayed.
Front and bird’s-eye views
The MOD system operates in the following conditions when the camera view is displayed:
- When the shift lever is in the P (Park) or N (Neutral) position and the vehicle is stopped, the MOD system detects moving objects in the bird’s-eye view. The MOD system will not operate if the outside mirrors are moving in or out, in the stowed position, or if either front door is opened.
Rear and bird’s-eye views
- When the shift lever is in the D (Drive) position and the vehicle speed is below approximately 6 mph (10 km/h), the MOD system detects moving objects in the front view.
- When the shift lever is in the R (Reverse) position and the vehicle speed is below approximately 6 mph (10 km/h), the MOD system detects moving objects in the rearview. The MOD system will not operate if the tailgate is open.
Rear and front-side views
The MOD system does not detect moving objects in the front-side view. The MOD icon is not displayed on the screen when in this view. When the MOD system detects moving objects near the vehicle, a chime will be heard and a yellow frame will be displayed on the view where the objects are detected. While the MOD system continues to detect moving objects, the yellow frame continues to be displayed.
While the RCTA chime is beeping, the MOD system will not chime. In the bird’s-eye view, the yellow frame 1O is displayed on each camera image (front, rear, right, left) depending on where moving objects are detected. The yellow frame 2O is displayed on each view in the front view and rear view modes. A blue MOD icon 3 is displayed in the view where the MOD system is operative. A gray MOD icon is displayed in the view where the MOD system is not operative. If the MOD system is turned off, the MOD icon 3O is not displayed.
TURNING MOD ON AND OFF (if so equipped)
Some vehicles include the option to allow the MOD system to be turned on or off.
To turn the MOD system on or off:
- Press the or button on the steering wheel to navigate to the “Settings” screen.
- Using the buttons, select “Driver Assistance” and press the ENTER button.
- Select “Parking Aids” and press the ENTER button.
- Toggle ON or OFF “Moving Object” using the ENTER button.
You can also turn the MOD on or off by pressing the Parking Aids system switch (if so equipped).
MOD SYSTEM LIMITATIONS
Listed below are the system limitations for MOD. Failure to operate the vehicle in accordance with these system limitations could result in serious injury or death.
- Do not use the MOD system when towing a trailer. The system may not function properly.
- Excessive noise (for example, audio system volume or an open vehicle window) will interfere with the chime sound, and it may not be heard.
- The MOD system performance will be limited according to environmental conditions and surrounding objects such as:
- When there is low contrast between the background and the moving objects.
- When there is a blinking source of light.
- When strong light such as another vehicle’s headlight or sunlight is present.
- When camera orientation is not in its usual position, such as when a mirror is folded.
- When there is dirt, water drops, or snow on the camera lens.
- When the position of the moving objects in the display is not changed.
- The MOD system might detect flowing water droplets on the camera lens, white smoke from the muffler, moving shadows, etc.
- The MOD system may not function properly depending on the speed, direction, distance, or shape of the moving objects.
- If your vehicle sustains damage to the parts where the camera is installed, leaving it misaligned or bent, the sensing zone may be altered and the MOD system may not detect objects properly.
- When the temperature is extremely high or low, the screen may not display objects clearly. This is not a malfunction.
The blue MOD icon will change to orange if one of the following has occurred:
- When the system is malfunctioning.
- When the component temperature reaches a high level (the icon will blink).
- When the rearview camera has detected a blockage (the icon will blink).
If the icon light continues to illuminate orange, have the MOD system checked. It is recommended that you visit a NISSAN dealer for this service.
- Do not use alcohol, benzine or thinner to clean the camera. This will cause discoloration.
- Do not damage the camera as the monitor screen may be adversely affected.
If dirt, rain or snow accumulates on any of the cameras 1O, the MOD system may not operate properly. Clean the camera by wiping with a cloth dampened with a diluted mild cleaning agent and then wiping with a dry cloth.
Adjust airflow direction for the driver and passenger’s side vents or center vents 2O by moving the vent slide and/or vent assemblies. Open or close the driver, passenger, and center vents by using the dial. The defrost vents 1O located above the driver and passenger side vents cannot be adjusted or closed.
The Frontier is likely to include systems like forward collision warning, blind-spot monitoring, rear cross-traffic alert, and a rearview camera.
Most modern vehicles, including the 2023 Frontier, typically feature a lane departure warning system.
Pedestrian detection is often part of the advanced safety features in newer vehicles, but availability depends on the trim and package.
The air vents are manually adjustable and are designed to direct airflow throughout the cabin for heating, cooling, or ventilation.
Front air vents are typically individually adjustable, allowing front passengers to direct air as needed.
The presence of rear air vents depends on the model and trim level. Higher trims may offer this feature.
In models with automatic climate control, the system adjusts the airflow through the vents based on the set temperature.
Most modern vehicles, including the Frontier, come equipped with a cabin air filter that filters out dust, pollen, and other particles.
Many of the detection systems can be manually disabled, typically through settings in the infotainment system or designated buttons.
Air vents can be cleaned with a soft cloth or a specialized vent brush to remove dust and debris.
While these systems are generally reliable, their effectiveness can be reduced in poor weather conditions like heavy rain, fog, or snow.
This feature is commonly found in newer models, but its availability may vary by trim level.
The cabin air filter should be replaced approximately every 15,000 to 30,000 miles, but this can vary based on driving conditions.
Some systems may allow sensitivity adjustments, which can typically be done through the vehicle’s settings.
Yes, the air vents in the Frontier are designed to provide both heating and cooling based on the climate control settings.
View Full User Guide: Nissan FRONTIER 2023 User Guide