2023 Subaru Ascent Display User Guide

2023 Subaru Ascent Display User Guide

With its high-resolution touchscreen and user-friendly controls, the 2023 Subaru Ascent provides easy access to entertainment, navigation, and car settings. Connectivity is improved by standard Apple CarPlay and Android Auto, which makes every trip more convenient and pleasurable for both drivers and passengers.

2023 Subaru Ascent Review, Price, Features and Mileage (Brochure)

Subaru Center information dis-play (CID) Guide

WARNING
Always pay attention to safe driving when operating the center informa-tion display while the vehicle is in motion. When operation of the cen-ter information display is disturbing your awareness and ability to con-centrate on driving, stop the vehicle in a safe place before performing operations on the display. Also, do not concentrate on the display while driving. Doing so could result in an accident.

Features
All information is displayed on the center information display, including vehicle set-tings, vehicle status, navigation system (if equipped) operation, audio operation, and climate control operation.

Interruption screen	202
Vehicle status and maintenance infor- mation	204
Vehicle settings	210
Climate control op- erations	210
Surround View Moni- tor (if equipped)/Rear view camera	320/Refer to the navi- gation/audio Owner’s Manual.
Navigation system	Refer to the naviga- tion/audio Owner’s Manual.
Audio/telephone	Refer to the naviga- tion/audio Owner’s Manual.
EyeSight	Refer to the Owner’s Manual supplement for the EyeSight sys- tem.

The center information display can also be used to set and initialize the center information display itself.

NOTE

• When the vehicle is in motion, certain functions and selections may not be available.
• The language and units for both the center information display and the combination meter display (color LCD) can be changed. For details about language settings, refer to “General settings”. For de-tails about unit settings, refer to “Car settings”.
• The images displayed in this Own-er’s Manual are sample images. The actual image may vary depending on the region and vehicle specifica-tions.

Welcome screen
Welcome screen and Good-bye screen are motion graphic displayed on the combination meter display and center information display upon entering and exiting the vehicle.
When the driver’s door is opened and closed, the welcome screen will appear for a short time.

NOTE

• The welcome screen will disappear when the ignition switch is turned to the “ON” position while the welcome screen is shown.
• The welcome screen can be turned on or off. For details, refer to “Gen-eral settings”
• For a certain period of time after the welcome screen has once appeared, it may not appear again even when the driver’s door is opened and closed. This does not indicate a malfunction.

Good-bye screen
The good-bye screen will be displayed under the following conditions.

• The driver’s door is opened after the ignition switch is put in the “OFF” position.
• 3 minutes have passed after the ignition switch is put in the “OFF” position with the driver’s door closed.
• 10 minutes have passed when the hands-free phone is used after the ignition switch is put in the “OFF” position.
• The battery voltage is low when the ignition switch is put in the “OFF” position.

Interruption screen
Useful messages, such as reminders, weather information (if equipped) and traffic information (if equipped) may inter-rupt the current screen and appear on the display accompanied by a beep. Take the proper action according to the message.

Touch screen operations
The center information display has a touch screen. Operations are performed by touching the touch screen directly.

Touch
Quickly touch and release once.

Drag

Touch the screen and move the screen to the desired position.

Swipe
Quickly move the screen by swiping with your finger.

NOTE
Swipe operations may not be per-formed smoothly in high altitudes.

Display

Touch screen

1. HOME icon (Refer to “HOME icon”
2. Status bar (Refer to “Status bar”
3. Information bar (Refer to “Information
4. Main screen (Refer to “Main screen”
5. Driver profiles icon (Refer to “Driver profiles icon”
6. Manage device icon (Refer to the sepa-rate navigation/audio Owner’s Manual.)
7. Climate control screen (Refer to “Climate control screen”
8. Car settings icon (Refer to “Car settings icon”

While the ignition switch is in the “ACC” or “ON” position, the touch panel will activate.

Status bar
The outside temperature and clock are displayed on the status bar.

NOTE

• The outside temperature indicator shows the temperature around the sensor. However, the temperature may not be indicated correctly or the update may be delayed in the following conditions.
  • While parking or driving at low speeds
  • When the outside temperature changes suddenly (example: when going in and out of an underground parking area or when passing through a tunnel)
  • When starting the engine after being parked for a certain period of time
• You can set the temperature units to be displayed in Celsius (8C) or Fahrenheit (8F). For details, refer to “General settings”.
• The clock can be displayed in either 12-hour display or 24-hour display. For details, refer to “Clock”.
• Touch the clock on the status bar to display the clock setting screen. Refer to “Clock”
• For details about Bluetooth device information, refer to the navigation/audio Owner’s Manual.

Information bar
Swipe the information bar or touch or on the information bar to switch the item displayed.

Audio screen:

The screen of the currently selected audio source is displayed.
For details about how to use the audio set, refer to the separate navigation/audio Owner’s Manual.

Navigation screen (models with naviga-tion system):
The directions to the destination are displayed on the screen.

NOTE
When a destination is not set in the navigation system, the compass orien-tation, street name and speed limit remain displayed on the screen.

Favorite screen:
This screen displays up to three optional pieces of information that can be selected from the following items.

1. If equipped
2. Models with SiriusXM Satellite Radio

NOTE
Some items may not be shown depend-ing on the model and specifications.
The items shown on the favorite screen can be changed. For details, refer to “Favorite Widgets”.

Weather information screen (if equipped):

NOTE

• When all of the following conditions are satisfied, weather information is displayed.
  • The vehicle is equipped with an audio and navigation system for SiriusXM satellite radio.
  • The SiriusXM satellite radio sub-scription is active.
• The weather forecast for the set destination remains displayed until a new destination is set or until the destination is reached.
• Depending on the reception timing of XM, the weather information may be delayed.

X-MODE screen:

Models with 1 mode
Models with 2 modes
X-MODE information is displayed on the screen.
Also, X-MODE can be switched to a different mode on the screen.

Main screen
For details about the following menu, refer to the separate navigation/audio Owner’s Manual.

• Radio
• Media
• Phone
• Map
• Apps
• My Subaru
• SUBARU STARLINK
• Add Shortcut

Auto Vehicle Hold icon
To turn the Auto Vehicle Hold function on and off, touch the “Auto Vehicle Hold” icon. When the Auto Vehicle Hold function is off, the Auto Vehicle Hold indicator light on the combination meter turns off. The “Auto Vehicle Hold” indicator on center informa-tion display also turns off at the same time. Refer to “To turn on/off the Auto Vehicle Hold function”.

Vehicle Dynamics Control icon

To turn the Vehicle Dynamics Control on and off, touch the “Vehicle Dynamics Control” icon.
When the Vehicle Dynamics Control sys-tem is turned off during engine operation, the Vehicle Dynamics Control OFF indica-tor light on the combination meter illumi-nates. The “Vehicle Dynamics Control” icon will then turn off.
The Vehicle Dynamics Control system will be deactivated. When you touch the “Vehicle Dynamics Control” icon again to reactivate the Vehicle Dynamics Control system, the Vehicle Dynamics Control OFF indicator light turns off. The “Vehicle Dynamics Control” icon will then turn on. Refer to “To turn on/off the Vehicle Dynamics Control system” .

Cabin Connect
Touch the “Cabin Connect” icon to turn it on and off. When the “Cabin Connect” function is on, the indicator illuminates, when the “Cabin Connect” function is off, the indicator does not illuminate. For de-tails, refer to “Cabin Connect” .

Display Off

Activation of the display off mode:

1. Touch “Display Off”.

Deactivation of the display off mode:

1. Touch the display or push the tem-perature control button.
   
2. Press and hold the volume knob to turn the screen back on.

Car settings icon
Touch to display the items that are changeable while driving.

Item		Available settings	Page reference for the vehicle system operation	Page reference for the setting procedure
1st menu	2nd menu
Vehicle Control	Vehicle Dynamics Control	ON/OFF	368	220
	X-MODE	Models with 1 mode: ON/OFF Models with 2 modes: Normal, Deep Snow/Mud, Snow/ Dirt	370	220
	Auto Vehicle Hold (AVH)	ON/OFF	376	220
	Steering Responsive Headlights (SRH)	ON/OFF	238	220
	Cruise Control Accel- eration	Eco/Comfort/Standard/Dynamic	*2	—
Driving Assistance	Pre-Collision Braking	Setting ON/Setting OFF	*2	—
	Lane Departure	All Functions/Lane Departure Prevention Function Only/Warning Buzzer Only/OFF
	BSD/RCTA*1	ON/OFF	388	220
	Driver Monitoring System*1	ON/OFF	402	220
More Settings	Warning Volume	Min/Mid/Max	387, 401 and *2	—
	Units	km, km/h, Liter/ Miles, MPH, Gallon	168 and 194	220

1. If equipped
2. For details about the EyeSight system, refer to the Owner’s Manual supplement for the EyeSight system.

Driver profiles icon
Touch

(driver profiles icon) to confirm the driver’s information. For details, refer to the separate navigation/audio Owner’s Manual.

HOME icon
Touch (HOME) to display the top menu.

Climate control screen
The climate control status is shown on the screen.

1. Driver’s seat heater/ventilation icon (if equipped)
2. Set temperature indicator (driver’s side)
3. Airflow mode
4. Climate control mode
5. Air inlet selection
6. SYNC mode indicator
7. Set temperature indicator (passenger’s side)
8. REAR SYNC mode indicator
9. REAR set temperature
10. Front passenger’s seat heater/ventilation icon (if equipped)
11. Customizable icon
12. REAR Climate control ON/OFF icon 13 Fan speed control
13. Climate control ON/OFF icon

When operating the climate control sys-tem, the main screen switches to the climate control screen. For details, refer to “Climate control panel”.

Main screen

To display the main screen, touch (HOME).
In this Owner’s Manual, the following settings will be explained. For details about other items, refer to the separate navigation/audio Owner’s Manual.

• “Settings” ? “General”
• “Settings” ? “Car”
• “Car Info”

General settings
Set the time and display general items.

1. Touch
   (HOME).
2. (Settings)
3. “General”
4. Select the preferred menu.

The setting adjustments to the following items can be manually changed to meet your personal requirements.

Item			Available settings	Page reference for the vehicle system operation	Page reference for the setting proce- dure
1st menu	2nd menu	3rd menu
General	Clock	Time Setting*1*2	AUTO/Manual	228	228
		Time Setting*3	Sync With Phone/Manual
		Time Zone*1	AUTO/Hawaii/Alaska/Pacific/ Mountain/Central/Eastern/Atlantic/ Newfoundland/Guam		220
		Daylight Saving Time*1	AUTO/ON (+1 hour)/OFF		220
		Clock Format	12H/24H		220
	Display	Display Off	Turn the screen off.	—	220
		Brightness Dial	ON/OFF	171	220
		Brightness/Contrast	Set and adjust the brightness and contrast of the display.	220	220
	Wi-Fi Settings	Wi-Fi	ON/OFF	*6	—
		Connected to:	Select the registered devise.
		Available Wi-Fi Networks	Add
		Wi-Fi Protected Setup	PIN Setup/Push Button Setup
		Registered Wi-Fi Networks	—
	Wi-Fi Security Infor- mation	Wi-Fi Security Information (AP mode)	—

 

Item			Available settings	Page reference for the vehicle system operation	Page reference for the setting proce- dure
1st menu	2nd menu	3rd menu
General	Wi-Fi Hotspot	Wi-Fi Hotspot	ON/OFF	*7	—
		Wi-Fi name (SSID):	—
		Security Type:	—
		Password:	—
		Broadcast Frequency:	—
		SSID Broadcast	ON/OFF
		Connected Devices:	—
	Reminder Screen	Maintenance	ON/OFF	202	220
		Birthday	ON/OFF		220
		Anniversary	ON/OFF		220
	Valet Mode	Passcode Setting*8	Keyboard: Enter New Passcode	230	220
		Activate Valet Mode	Keyboard: Enter Your Passcode
		Change Passcode	Keyboard: Change Passcode
	Meter Screen	Gauge Initial Movement	ON/OFF	168	220
		Meter Information Screen	Eco Gauge/OUT TEMP/Clock/ Compass*4/Gas Range	196	220
		Turn by Turn Screen Interrup- tion*1	ON/OFF	198	220

 

Item			Available settings	Page reference for the vehicle system operation	Page reference for the setting proce- dure
1st menu	2nd menu	3rd menu
General	Camera	Rear Camera Delay Control	ON/OFF	320	220
		Steering Angle Lines	ON/OFF	320	220
	Climate Control	Customize Climate Button	A/C/MAX A/C/AUTO/Recircula- tion/SYNC	286	220
	Temperature Unit	8F/8C	—	—	221
	Language	—	English/Français/Español	194 and 201	220
	Tire Pressure Units*5	—	kPa/PSi	198	220
	Home Screen Short- cuts	—	ON/OFF	*6	220
	Welcome Screen	—	ON/OFF	195	220
	Goodbye Screen	—	ON/OFF	195	220
	Favorite Widgets	—	Set a favorite widget from the list.	204	221
	Birthday List	—	Set a birthday.	202	221
	Anniversary List	—	Set an anniversary day.	202	222
	Periodic Rest Notifica- tion*1	—	ON/OFF	*6	—

 

Item			Available settings	Page reference for the vehicle system operation	Page reference for the setting proce- dure
1st menu	2nd menu	3rd menu
General	Software Update	Update	Check if a new software update	*6	—
		Automatically Check for Up- dates	ON/OFF
		Automatically Download Up- dates	ON/OFF
		Default	—
	SUBARU STARLINK Apps Recovery	—	OK/Cancel	*6	—
	SUBARU STARLINK Auto Connect	—	ON/OFF
	Factory Data Reset	—	Reset/Cancel
	System Information	—	—
	Free/Open Source Software Information	—	—

1. Models with navigation system
2. Models with SUBARU STARLINK without navigation system
3. Models without SUBARU STARLINK or navigation system
4. Models without navigation system
5. If equipped
6. For details about the audio and navigation system, refer to the Owner’s Manual supplement for the audio and navigation system.
7. For details, refer to the Owner’s Manual supplement for SUBARU STARLINK Safety and Security.
8. Displayed until valet mode is set.

NOTE
Touch to display the explanation of the items.

Car settings
Perform the EyeSight system setting and vehicle setting.

1. Touch
   (HOME).
2.  (Settings)
3. “Car”
4. Select the preferred menu.

The setting adjustments to the following items can be manually changed to meet your personal requirements

Item			Available settings	Page reference for the vehicle system opera- tion	Page reference for the setting procedure
1st menu	2nd menu	3rd menu
Car	EyeSight	Pre-Collision Braking	Setting ON/Setting OFF	*3	—
		Lane Departure	All Functions/Lane Departure Prevention Function Only/ Warning Buzzer Only/OFF
		Cruise Control Acceleration	Eco/Comfort/Standard/Dy- namic
		Lead Vehicle Acquisition Sound	ON/OFF
		Lead Vehicle Moving Monitor	ON/OFF
		Select Drive on Left/Drive on Right	Right Lane/Left Lane
	EyeSight Assist Monitor	Red Indicator	ON/OFF
		Yellow Indicator	ON/OFF
		Green Indicator	ON/OFF
	Reverse Automatic Braking (RAB)*1	Sonar Audible Alarm	ON/OFF	391	220

 

Item			Available settings	Page reference for the vehicle system opera- tion	Page reference for the setting procedure
1st menu	2nd menu	3rd menu
Car	Driver Monitoring System*1	Driver Monitoring System	ON/OFF	402	220
		Repeat Facial Scan	Perform the user recognition.		222
		User Recognition	ON/OFF		220
		Automatically Retract Seat on Entry	ON/OFF		220
		Register User	Register the user.		222
		Update Seat and Mirror Posi- tion	Re-register the driver’s posi- tion.		222
		Delete Driver Position	Delete the registered driver’s position.		222
		Delete User	Delete the registered user.		222
		Delete All Users	Delete all registered users.		222
	Keyless Entry System	Audible Signal*1*2	ON/OFF	130 and 135	220
		Hazard Warning Flasher	ON/OFF	130 and 135	220
		Security Relocking*1	20 seconds/30 seconds/40 seconds/50 seconds/60 sec- onds/OFF	137	220
		Driver Door Unlock*1	Driver Door Only/All	124	220
		Rear Gate/Trunk Unlock*1	Rear Gate/Trunk Only/All	124	220

 

Item			Available settings	Page reference for the vehicle system opera- tion	Page reference for the setting procedure
1st menu	2nd menu	3rd menu
Car	Defogger	—	15 minutes/Continuous	273	220
	Interior Light	—	10 seconds/20 seconds/30 seconds/OFF	304	220
	Ambient Lighting*1	—	ON/OFF	171	220
	Auto Light Sensor	Light Sensitivity	Min/Low/Mid/Max	231	220
		Wiper Link	ON/OFF	231	220
	Welcome Lighting	Approaching Time Set	30 seconds/60 seconds/90 seconds/OFF	232	220
		Leaving Time Set	30 seconds/60 seconds/90 seconds/OFF		220
	One-Touch Lane Changer	—	ON/OFF	240	220
	Auto Door Lock/Unlock	Auto Door Lock	Vehicle Speed/Shift into or out of PARK*1/OFF	139	220
		Auto Door Unlock	Ignition OFF/Driver Door Open/ Shift into or out of PARK*1/OFF		220
	Rear Seat Reminder	—	ON/OFF	65	220
	Door Mirror Setting*1	Auto Electric Folding	ON/OFF	272	220
		Reverse Tilt	ON/OFF	270	220
	Power Rear Gate*1	Power Rear Gate Memory	ON/OFF	154	220
	Vehicle Dynamics Control	—	ON/OFF	368	220
	Auto Vehicle Hold (AVH)	—	ON/OFF	376	220

 

Item			Available settings	Page reference for the vehicle system opera- tion	Page reference for the setting procedure
1st menu	2nd menu	3rd menu
Car	Rear Vehicle Detection (BSD/ RCTA)*1	—	ON/OFF	388	220
	X-MODE	—	Models with 1 mode: ON/OFF Models with 2 modes: Normal, Snow/Dirt, Deep Snow/Mud	370	220
	Steering Responsive Head- lights (SRH)	—	ON/OFF	238	220
	Warning Volume	—	Min/Mid/Max	387, 401 and *3	220
	Units	—	km, km/h, Liter/ Miles, MPH, Gallon	168 and 194	220

1. If equipped
2. This setting also works as the On/Off setting of the power rear gate buzzer for starting operation. However, you cannot change the warning buzzer setting for a detecting jam, etc.
3. For details about EyeSight system, refer to the Owner’s Manual supplement for the EyeSight system.

NOTE
Touch to display the explanation of the items.

How to select items on the screen

ON/OFF setting
Example
Touch the changing menu and select ON

Selecting
Example
Touch the preferred item.

How to set items on the screen

Brightness/Contrast
Set and adjust the brightness and contrast of the center information display.

NOTE
“Brightness” can only be adjusted when “Brightness Dial” is off. Refer to “General settings”.

1. Touch (HOME).
2. 
    (Settings)
3. General”
4. Display”
5. Brightness/Contrast”
   
6. Drag to adjust the brightness and contrast.

Touch “Default” to revert to the factory setting.

Favorite Widgets

The menu on the favorite screen can be customized.

1. Touch (HOME).
2.  (Settings)
3. “General”
4. “Favorite Widgets”
5. Select the icon of the display position.
6. Select the display item.

Birthday List
If a birthday or anniversary is approaching, a message will be shown when the ignition switch is turned to the “ON” position. This function can be set to on or off by “Reminder Screen”. For details, refer to “General settings”.

1. Touch
   (HOME).
2.  (Settings)
3. “General”
4. “Birthday List”
   
5. “Add”
   
6. Enter the name.
7. “Next”.
   
8. Enter the date.
9. “OK”

NOTE
A maximum of 5 birthdays can be stored.

Anniversary List
The procedure for setting an anniversary is the same as “Birthday List”  except that in step 4 “Anniversary List” is selected.

2023 Subaru Ascent Review, Price, Features and Mileage (Brochure)

Driver Monitoring System (if equipped)
The Driver Monitoring System settings can be changed.
For setting method for the following menu on the Driver Monitoring System, refer to “ON/OFF setting”.

• Driver Monitoring System
• User Recognition
• Automatically Retract Seat on Entry

Repeat Facial Scan:

1. Touch (HOME).
2. 
    (Settings)
3. “Car”
4. “Driver Monitoring System”
5. “Repeat Facial Scan”
   
6. “OK”
7. While seated in the driver’s seat, face forward and wait for a few moments. When the scan is completed, the completion screen is displayed on the combination meter (color LCD).

Register User:

1. Adjust the seat position, outside mirror angle, and reverse tilt-down outside mirror angle so that you are seated in the correct driving posture.
   NOTE
   1. Start the user registration after ad-justing the seat position, outside mirror angle, and reverse tilt-down outside mirror angle. If they are adjusted during user registration, it may be disrupted.
   2. Refer to “Power seat” or “Out-side mirrors”.
      If the ignition switch is turned to the “OFF” position before user registra-tion is complete, the information of the adjusted seat position, outside mirror angles, and reverse tilt-down outside mirror angle will not be saved.
2. Touch (HOME).
3. 
    (Settings)
4. “Car”
5. “Driver Monitoring System”
6. “Register User”
   
7. Select the preferred user from the list.
   
8. “Set”
9. While seated in the driver’s seat, face forward and wait for a few moments.
   
   
   When the screen changes, the registration of the facial scan is completed.
   
   
   1. Forward direction
   2. Display direction
      1. Face forward.
      2. Do not lower your chin.
      3. Face the display.
      4. Display
         NOTE
         1. If user registration cannot be per-formed, turn your face forward as shown in the illustration, then turn to the display.
         2. There are some cases where user registration cannot be registered properly. In those cases, refer to “Driver
         3. Monitoring System”. If “Unable to register. Try again.” appears, repeat the procedure be-ginning from step 5.
            
10. Enter the name.
11. “Next”
    
12. . Select the preferred icon. 1
13. “Set”

NOTE

• An existing user can be overwritten by selecting a registered number. When a user is registered by over-writing, the individual fuel economy data is reset.
• When “User Recognition” is set to OFF, user registration cannot be selected.

Update Seat and Mirror Position:

1. Touch (HOME).
2.  (Settings)
3. “Car”
4. “Driver Monitoring System”
5. “Update Seat and Mirror Position”
   
6. “Set”

NOTE

• Start the user registration after ad-justing the seat position, outside mirror angle, and reverse tilt-down outside mirror angle. If they are adjusted during user registration, it may be disrupted.
  Refer to “Power seat” or “Out-side mirrors”.
• If the ignition switch is turned to the “OFF” position before user registra-tion is complete, the information of the adjusted seat position, outside mirror angles, and reverse tilt-down outside mirror angle will not be saved.

Delete Driver Position:

1. Touch (HOME).
2.  (Settings)
3. “Car”
4. “Driver Monitoring System”
5. “Delete Driver Position”
   
6. “Yes”

Delete User:

1. Touch (HOME).
2.  (Settings)
3. “Car”
4. “Driver Monitoring System”
5. “Delete User”
   
6. Select the preferred user from the list.
   
7. “Yes”

Delete All Users:

1. Touch (HOME).
2. 
    (Settings)
3. “Car”
4. “Driver Monitoring System”
5. “Delete All Users”
   
6. Yes”

Car information screen

1. Touch (HOME) to display the top menu.
   
2.  (Car Info)

Driving Statistics screen

1. Driving Statistics
2. Steering angle
3. Running condition
4. Vehicle posture
5. Telltale screen

This screen displays the driving status of the vehicle and the operation status func-tions. For functions that are operating, the indicator will illuminate or flash.

NOTE

• The vehicle posture indication may differ from the actual vehicle pos-ture.
• When X-MODE has been turned on, the screen of the center information display will be changed to the X-MODE screen.
• The vehicle posture angle varies not only due to the angle of the road surface, but also due to the vehicle tilt caused by the occupants, cargo, and acceleration or deceleration.

Maintenance screen

Maintenance reminders can be set.

Engine Oil change reminder:

1. Touch “Maintenance” from the 2nd menu in the car info screen.
2.  (Engine Oil)
3. Select “Notification Date” or “Notification Distance” of the reminder.
4. “Set”
5. *

Oil Filter change reminder:
The setting procedure is the same as the “Engine Oil” reminder, but touch the “Oil Filter” item in step 2.

Tires rotation reminder:
The setting procedure is the same as the “Engine Oil” reminder, but touch the “Tires” item in step 2.

Maintenance Schedule setting:
The setting procedure is the same as the “Engine Oil” reminder, but touch the “Maintenance Schedule” item in step 2.

NOTE

• Touch “Reset” to reset each setting.
• Touch “Update” to revert to the default value.

 

Useful Links:

2023 Subaru Ascent Review, Price, Features and Mileage (Brochure)

2023 Subaru Ascent Keys and Smart Keys User Guide

2023 Subaru Ascent Seats and Seat Belts User Guide