Auto User Guide

Tata Nexon BSVI Warning and Indicator Lights User Guide

Tata logo

Tata Nexon BSVI Warning and Indicator Lights User Guide

The Tata Nexon BSVI instrument cluster has a variety of warning and indication lights that inform drivers to vehicle status, system problems, and safety alerts, ensuring increased awareness, safety, and timely maintenance for peak performance.

Video: Tata Nexon BSVI Dashboard Warning Indicators

Tata Warning and Indicator Lights Guide

Warning Lamps Color Indicator Remarks
Malfunction Indication Lamp (MIL) Amber Tata Nexon BSVI Warning and Indicator Lights - fig 1
  1. Illuminates when ignition is switched ‘ON’. Once engine is started, it turns ‘OFF’.
  2. It remains ‘ON’ for any engine related fault that may increase emis- sion levels of the vehicle beyond the regulatory norms. Contact the TATA MOTORS Authorised Service Centre for rectification.
Check Engine Lamp Amber Tata Nexon BSVI Warning and Indicator Lights - fig 2
  1. Illuminates when ignition is switched ‘ON’. Once engine is started, it turns ‘OFF’.
  2. Illuminates continuously if a fault arises in Engine Management System. Contact the TATA MOTORS Authorised Service Centre.
Immobilizer Red Tata Nexon BSVI Warning and Indicator Lights - fig 3
  1. Illuminates when the system disables engine start if the original key is not used.
  2. Lamp blinks: Vehicle is in immobilized condition when key is not in- serted.
  3. Lamp ON: Problem with key/system. Contact a TATA MOTORS Author- ised Service Centre.
  4. Lamp OFF: Normal condition (Authenticated user) and engine will start.
Pre-Heat indicator / Glow Plug indicator (Diesel) Amber Tata Nexon BSVI Warning and Indicator Lights - fig 4
  1. Illuminates when ignition key is in ‘ON’ position.
  2. Engine shall be started only after this indicator goes ‘OFF’.
Turn Signal Green Tata Nexon BSVI Warning and Indicator Lights - fig 5 Indicates direction indicated by the turn signal. Blinks along with buzzer while operating left/right turn indicator only when ignition is switched ‘ON’. The direction indicator arrow on Instru- ment Cluster flashes along with external indicator lights as selected. Both Tell tales shall blink simultaneously when Hazard switch is pressed irrespective of Ignition ON and the Tick-Tock sound shall be given when any one or both the Tell tales are ON.
High Beam Blue Tata Nexon BSVI Warning and Indicator Lights - fig 6 Illuminates when the high beam headlamps are switched ‘ON’ or flashed.
Low Oil Pressure indicator Red Tata Nexon BSVI Warning and Indicator Lights - fig 7
  1. Illuminates when ignition is switched ‘ON’ and goes ‘OFF’ once required engine oil pressure is developed after starting the engine.
  2. If the low oil pressure indicator does not glow or remains ‘ON’ with the ‘IGN’ ‘ON’ and engine is running, it indicates a fault in the elec- trical circuit / lubrication system. Contact the TATA MOTORS Au- thorised Service Centre.
Battery charging Red Tata Nexon BSVI Warning and Indicator Lights - fig 8 Illuminates when ignition is switched ‘ON’. Once engine is started, it turns ‘OFF’. If it remains ‘ON’ while the engine is running, it indicates that the battery is not getting charged. Switch off all unnecessary electrical equipment and contact the TATA MOTORS Authorised Service Centre.
Driver seat belt warning Red Tata Nexon BSVI Warning and Indicator Lights - fig 9 Seat belt warning indicator comes ‘ON’ for 4 seconds, when ignition is turned ‘ON’. If seat belt is not fastened and speed is less than 15 Kmph, then seat belt telltale will turn ON as initial warning. If seat belt is not fastened and vehicle speed goes above 15 Kmph, then final warning will start with telltale flashing and Audio chime for 90 sec- onds. After 90 seconds, telltale will be ON and Audio chime will be OFF.Note:
  1. Telltale will turn off either when seatbelt is buckled or Reverse gear is engaged when it is in initial warning stage.
  2. When it is in final warning with Chime ON, the telltale will be OFF on fastening the seat belt or engaging the reverse gear.
HHC Warning lamp (If applicable) Amber Tata Nexon BSVI Warning and Indicator Lights - fig 10 Illuminates if Hill Hold System is activated. If continuously ON then HHC system is at fault condition, please take your vehicle to nearest TATA authorized service centre at the earliest
Airbag status (if applicable) Red Tata Nexon BSVI Warning and Indicator Lights - fig 11 Illuminates when ignition is switched ‘ON’ and goes ‘OFF’ in approx. 4 seconds. If it continuously illuminates or blinks then contact the TATA MOTORS Authorised Service Centre immediately.
Park Brake / Brake Fluid Low / EBD malfunction Red Tata Nexon BSVI Warning and Indicator Lights - fig 12 Illuminates momentarily when ignition is switched ‘ON’. Once parking brake is released, it turns ‘OFF’. If it remains ‘ON’, it indicates
  1. Brake fluid level is low.
  2. Park brake is applied & turns ‘OFF’ when it is released.
  3. EBD malfunctioning
High Coolant Temperature Red Tata Nexon BSVI Warning and Indicator Lights - fig 13 Illuminates when ignition is switched ‘ON’ and goes ‘OFF’ in approx. 4 seconds. If the engine is overheating, this indicator blinks along with an audi- ble buzzer at his stage Contact the TATA MOTORS Authorised Ser- vice Centre immediately. This symbol blinks along with audible buzzer when engine coolant temperature is more than normal. When engine coolant temp increases to hazardous level, Tell tale shall blink with RED color and it is accompanied by audio warning. Note: Never remove the radiator pressure cap from the radiator when the engine is hot. Do not restart the engine until the problem has been duly attended.
Cruise Control lamp (if applicable) Green Tata Nexon BSVI Warning and Indicator Lights - fig 14 This symbol lights up when the ‘IGN’ is turned ‘ON’ and shall go ‘OFF’ after 4 sec. The Cruise Control is used to indicate the status of cruise control system to the driver. Lamp ON indicates cruise control fea- ture is present and it is activated.
ABS Amber Tata Nexon BSVI Warning and Indicator Lights - fig 15 Illuminates when ignition is switched ‘ON’ and goes ‘OFF’ in 3 seconds. Illuminates continuously if there is any malfunction in ABS. Normal brak- ing system will be operational without assistance of ABS. Contact the TATA MOTORS Authorised Service Centre immediately.
Low Fuel indicator Amber Tata Nexon BSVI Warning and Indicator Lights - fig 16 Illuminates momentarily when ignition is switched ‘ON’. The symbol lights up continuously if fuel level in the tank is low. Fuel needs to be filled immediately. IMPORTANT: The warning light will start flashing if there is any fault in the fuel system. Contact the TATA MOTORS Authorised Service Centre imme- diately
Key Not Detected (If applicable) Amber Tata Nexon BSVI Warning and Indicator Lights - fig 17 This symbol lights up when the Valid Smart key is not detected inside the vehicle.
Press Clutch Pedal to Start Engine (If applicable) Amber Tata Nexon BSVI Warning and Indicator Lights - fig 18 Press Clutch: This turns ON with IGN ON till user press the clutch pedal to start the engine.
Water in fuel indicator (Diesel) Amber Tata Nexon BSVI Warning and Indicator Lights - fig 19 Illuminates continuously if excess water is accumulated in the fuel filter. Contact the TATA MOTORS Authorised Service Centre to drain the water immediately to avoid serious damage to the fuel injection system.
Daytime running lamps DRL (if applicable) Amber Tata Nexon BSVI Warning and Indicator Lights - fig 20 This symbol illuminates when the Day Time Running lamp is ‘ON’.
Door Ajar lamp Red Tata Nexon BSVI Warning and Indicator Lights - fig 21 All four door and Tail gate are indicated independently when respective door or tail gate is open.
HDC Warning lamp (If applicable) Red Tata Nexon BSVI Warning and Indicator Lights - fig 22 Illuminates if Hill Decent Control System is activated. If continuously ON then HDC system is at fault condition, Please take your vehicle to nearest TATA authorized service centre at the earliest
Rear Fog Lamp (if applicable) Amber Tata Nexon BSVI Warning and Indicator Lights - fig 23 Illuminates when the rear fog lamp is ‘ON’.
Front Fog Lamp (If applicable) Green Tata Nexon BSVI Warning and Indicator Lights - fig 24 Illuminates when the front fog lamp is ‘ON’.
Electronic Stability Pro- gram (ESP) (if applicable) Amber Tata Nexon BSVI Warning and Indicator Lights - fig 25 If continuously ON then ESP system is at fault condition, Please take your vehicle to nearest TATA authorized service center at the earliest.
Front passenger Seat Belt Indicator Red Tata Nexon BSVI Warning and Indicator Lights - fig 26 Illuminates when ignition is switched ‘ON’ and goes ‘OFF’ after 4  Seconds. The warning lamp remains ‘ON’ for 30 seconds if the front passen- ger seat belt is not fastened. The warning lamp remains ‘ON’ continuously if the vehicle goes above 4 kmph If seat belts remains unbuckled and vehicle speed goes above 15 kmph, then final warning will start illuminates with audio chime for 90 seconds continuously.

Note:

  1. The warning lamp turns ‘OFF’ when vehicle speed goes below 2 kmph when it is in initial warning.
  2. Once the seat belt is fastened, the buzzer and warning indicator will go ‘OFF’.
  3. Seat belt audio alarm remains OFF when reverse gear is engaged.
Speed limit warning indicator Amber Tata Nexon BSVI Warning and Indicator Lights - fig 27 Illuminates when ignition is switched ‘ON’ and goes ‘OFF’ after 4 Seconds. When the vehicle speed cross 80 km/hrs. then Speed limit Warning indicator turn ‘ON’ along with for every 2 minute chime shall be sounded (Audible warn- ing). If vehicle speed crosses 120 km/hrs. then along with Speed limit Warning In- dicator, Chime will start continuously ON till the vehicle speed is above 120 km/hr. If vehicle speed is between 80 km/hrs. to 120 km/hrs. then chime will be- come less frequent but Speed Limit warning Indicator will remains ‘ON’ con- tinuously. When the vehicle speed is reduce below 80 km/hrs. then Speed limit Warning Indicator along with chime will gets turns ‘OFF’.
DPF Lamp Amber Tata Nexon BSVI Warning and Indicator Lights - fig 28 The warning light or symbol switches on constantly to indicate that the DPF needs to eliminate the trapped pollutants (particulate matter) through the re- generation process, it therefore does not indicate a malfunction. The warning light or symbol remain off during the entire DPF regeneration and light up only when driving conditions require the driver to be notified. To switch off the warning light or symbol, keep the car running until regeneration is complete (ideally at 3rd gear, 60 km/hr. with engine speed over 2000 rpm). The process normally takes about 20 minutes.

Note
Failure to be observed the appropriate procedure for a long distance when the DPF warning light comes ON, can cause the warning light (MIL) to come ON. In that case, please contact nearest TATA authorized service center to restore correct DPF operation.

ECO (If applicable) Green Tata Nexon BSVI Warning and Indicator Lights - fig 29 ECO lamp ON indicates Economy drive. This mode is used to achieve better fuel economy.
SPORT (If applicable) Amber Tata Nexon BSVI Warning and Indicator Lights - fig 30 This symbol comes ON when SPORT driving mode is activated when more torque is required.
CITY (If applicable) White Tata Nexon BSVI Warning and Indicator Lights - fig 31 CITY lamp ON indicates City drive mode. This mode is used to achieve optimum torque with fuel economy.
Water in fuel

indicator

(Diesel)

Amber Tata Nexon BSVI Warning and Indicator Lights - fig 32 The lamp remains on if excess water is accumulated in the fuel filter. It Illuminates momentarily when ignition is switched ‘ON’. When this lamp remains ‘ON’, drain the water immediately to avoid serious damage to the fuel injection system. This lamp also turns ON when Fuel Filter Clogging warning is activated.
Daytime running Lamps DRL (if available) Green Tata Nexon BSVI Warning and Indicator Lights - fig 33 This lamp comes on when the Daytime Running lamp is ‘ON’.
Door Ajar lamp (if available) White / Red Tata Nexon BSVI Warning and Indicator Lights - fig 34 All four door and Tail gate are indicated independently when the respective door or tail gate is open.
HDC Warning lamp (If available) Amber Tata Nexon BSVI Warning and Indicator Lights - fig 35

 

Illuminates if Hill Decent Control System is activated. If continuously ON then HDC system is at fault condition, Please take your vehicle to nearest TATA authorized service center at the earliest.
HDC ON (If available) Green Tata Nexon BSVI Warning and Indicator Lights - fig 36 Illuminates momentarily when ignition is switched ‘ON’. This symbol comes on when the HDC function is activated in the vehicle.
HHC warning lamp (If available) Amber Tata Nexon BSVI Warning and Indicator Lights - fig 37 Illuminates momentarily when ignition is switched ‘ON’. If continuously on then HHC, system is in fault condition. Please take your vehicle to TATA authorized service center at the earliest.

View Full PDF: Tata Nexon BSVI User Manual | Auto User Guide

Tata Nexon BSVI Instrument Cluster User Guide

Tata Nexon BSVI Seats and Seat Belt User Guide

Video: Tata Nexon BSVI Dashboard Warning Indicators

Leave a Reply

Your email address will not be published. Required fields are marked *