Tata Nexon BSVI Instrument Cluster User Guide
The Tata Nexon BSVI Instrument Cluster features a modern, digital-analog display that gives critical driving information like as speed, fuel level, RPM, gear position, and warning alerts, while also increasing driver awareness and convenience with its simple and intuitive structure.
Video: Tata Nexon BSVI Dashboard Warning Indicators
Tata INSTRUMENT CLUSTER – DIGITAL CLUSTER (VERSION 1) Guide
NOTE: All indicators shown may not be applicable to your vehicle.
Above image is only for reference. Red bar values shown may change as per vehicle.
INSTRUMENT CLUSTER – DIGITAL CLUSTER (VERSION 2)
NOTE: All indicators shown may not be applicable to your vehicle.
Above image is only for reference. Red bar values shown may change as per vehicle.
Speedometer
Speedometer indicates the vehicle speed in kmph.
NOTE
At every key IN and ignition ON, the Instrument Cluster LED gauges moves to MAX. and returns to non position.
Tachometer
Tachometer indicates engine speed in revolutions per min (rpm).
WARNING
- Whenever engine is accelerated beyond safe rpm, tachometer display turns RED. In such case, reduce the engine RPM immediately.
- Do not drive the vehicle with a high engine rpm. This may cause damage to the engine and reduce its life.
NOTE
- At every key IN and Ignition ON, tachometer LED display moves
from Min to MAX and returns to first bar ON. - This is a welcome strategy and a self-check feature.
Fuel Gauge 
When fuel telltale is moving ,in the tank nears empty, low fuel warning tell-tale light glows. Fill fuel as soon as possible. If fuel is not filled even after Low fuel warn-ing Tell tale ‘ON’, first bar in fuel gauge will start blinking to indicate more severe low fuel warning.
NOTE
- On inclines or curves, the fuel gauge may fluctuate or the 1st bar may blink or low fuel telltale may turn ON earlier than actual due to the movement of fuel in the tank.
- On inclines, curves, braking and sudden acceleration due to the movement of fuel in the tank, the fuel level display may fluctuate or the low fuel level warning lamp may illuminate earlier than usual. Always check the fuel level when the vehi-cle is on level road.
- When the ignition switch is in the “ON” position, this gauge gives an approximate indication of the amount of fuel in the fuel tank and it takes few seconds to stabilize after the ignition is turned ON.
WARNING
- Running the fuel tank too low or empty can cause engine to stall and could endanger User and passen-gers. User must stop and obtain ad-ditional fuel as soon as possible after low fuel warning telltale turns ON.
- Do not continue adding fuel after the automatic shut off function is oper-ated if it is equipped on the fuel pump. The sensor in the fuel tank may misjudge the amount of fuel re-maining.
- Low fuel warning symbol shall blink if there is any fault in the system. Take vehicle to the Ta-ta Motors au-thorized service station if the symbol starts blinking.
Temperature Gauge 
If the coolant temperature is very high, the engine coolant temperature tell-tale light flashes and you will hear an audio warn-ing. In this case, stop the vehicle, switch the engine ‘OFF’ and allow it to cool down for some time. Contact the nearest TATA MOTORS Authorized service centre im-mediately for rectification.
NOTE
At every key in and Ignition ON, Tem-perature Gauge Bars move to H and come back to C position. This is wel-come strategy and self-check feature.
WARNING
- The red progress bar indicates over-heating due to high coolant temper-ature that may damage the engine. If you continue to drive the vehicle in this case, it can result in severe engine damage or even fire.
- Never remove the radiator pressure cap from the radiator when the en-gine is hot. Do not restart the engine until the problem has been duly at-tended.
Useful Links:
View Full PDF: Tata Nexon BSVI User Manual | Auto User Guide
Tata Nexon BSVI Instrument Cluster User Guide
Tata Nexon BSVI Warning and Indicator Lights User Guide