2020 Tata Tigor BS VI Instrument Cluster User Guide
This tutorial covers the 2020 Tata Tigor BS VI instrument cluster’s features, functions, and how to read the gauges and indicators to monitor vehicle performance.
Video: Tata Tigor BS VI Warning Indicators
Instrument Cluster
Digital Cluster (Version 1) Chrome
NOTE
All indicators shown may not be applicable to the vehicle. Above image is only for reference.
Instrument Cluster – Digital Cluster (Version 2)
NOTE
All indicators shown may not be applicable to the vehicle. Above image is only for reference.
Speedometer 
Speedometer indicates the vehicle speed in kmph.
NOTE
- At every key IN and ignition ON, speedometer digits moves from 0 to 199 and returns to 0.
- This is a welcome strategy and a self-check feature.
Tachometer 
Tachometer indicates engine speed in revolutions per min (rpm).
WARNING
- Whenever engine is accelerated beyond safe rpm, tachometer display turns RED. In such case, reduce the engine RPM immediately.
- Do not drive the vehicle with a high engine rpm. This may cause damage to the engine and re-duce its life.
NOTE
- At every key IN and Ignition ON, tachometer LED display moves from Min to MAX and returns to first bar ON.
- This is a welcome strategy and a self-check feature.
Fuel Gauge
When the ignition switch is in “ON” position, fuel LED gives an approximate indication of the amount of fuel in the fuel tank. In indication window, “F” stands for full and “E” stands for empty. 
When fuel in the tank nears empty, low fuel warning telltale light glows. Fill fuel as soon as possible. If fuel is not filled even after Low fuel warning telltale ‘ON’, first bar in fuel gauge will start blinking to indicate more severe low fuel warning.
NOTE
- On inclines or curves, the fuel gauge may fluctuate or the 1st bar may blink or low fuel telltale may turn ON earlier than actual due to the movement of fuel in the tank.
- On inclines, curves, braking and sudden acceleration due to the movement of fuel in the tank, the fuel level display may fluctuate or the low fuel level warning lamp may illuminate earlier than usual. Always check the fuel level when the vehicle is on level road.
- When the ignition switch is in the “ON” position, this gauge gives an approximate indication of the amount of fuel in the fuel tank.
Temperature Gauge
When the ignition switch is in the “ON” position, this LED indicates the engine coolant temperature. The indicator should be within the normal, acceptable temperature range i.e. between “H” and “C”. If the indicator approaches “H”, overheating is indicated by a RED bar. If the coolant temperature reading is very high, the warning tell-tale flashes with an audible buzzer. In this case, stop the vehicle, switch ‘OFF’ the engine and cool it down for some time. Contact a nearest TATA MOTORS Authorized Ser-vice Centre immediately for rectification.
NOTE
At every key in and Ignition ON, Temperature Gauge Bars move to H and come back to C position. This is welcome strategy and self check feature.
WARNING
- The red progress bar indicates over heating due to high coolant temperature that may damage the engine. If you continue to drive the vehicle in this case, it can result in severe engine dam-age or even fire.
- Never remove the radiator pressure cap from the radiator when the engine is hot. Do not restart the engine until the problem has been duly attended.
Driver Information System
| Driver Information | System Image | Description |
|
Odometer |
 |
This indicates distance travelled by the vehicle. The odometer reading does not return to “0” when maximum value is reached; the display will freeze the maximum value. |
| Trip meter A & B |
|
The trip meter can be used to measure the distance travelled on short trips or between fuel stops. It can reset to “0” using SET button by long press. The trip meter reading becomes “0.0” after it crosses 9999.9 km. |
| Service reminder |  |
This indicates how many days/kilometres are left till service is due. If service is overdue, it will display “0” km or “0” days and a spanner symbol will blink every time ignition is ON for a few seconds. Never reset the display between service intervals as it may give incorrect readings. The information is retained in the service interval display even after the vehicle battery is disconnected.
NOTE: 1.This option is for indicative purpose only. Keep track of your odometer reading and follow the maintenance schedule. |
| Driver Infor- | System Image | Description |
|
Gear Recommendation |
|
Up or down arrow will be displayed on DIS to shift a gear up or down. No arrow shall be displayed when the selected gear is as per the Vehicle dynamics. Following the recommended Gear shall result into a better Fuel Economy. |
| Outside Ambient Temperature |
|
Displays outside ambient temperature in ºC. NOTE: The temperature sensor is in the front bumper of the vehicle, there- fore the temperature reading can be affected by heat reflection from the road surface, engine heat and the exhaust from surrounding traffic. This can cause an incorrect temperature reading when speed is under low speeds or when stopped.If display shows ‘- – ‘, take your car to TATA authorized service Centre. |
| Door Ajar XZ, XZA+, XZ+ |  |
All four door and trunk lid are indicated independently when respective door or trunk lid is open. NOTE: If any other door is open roof lamp will be ‘ON’ provided that roof lamp switch is in position. |
| Door Ajar XE/XM/ XMA |  |
This warning will be indicated when driver door is open. NOTE: If any other door is open roof lamp will be ‘ON’ provided that roof lamp switch is in position. |
| Driver Information | System Image |
Description |
| Clock |
|
When the ignition switch is in the “ON” position, it shows the time 12 Hour or in 24 Hours mode as per selection. Note: 1.You can do clock settings in Infotainment system when Infotainment is present in the vehicle. Whenever the battery terminals or related fuses are connected User must reset the clock time. This feature is available when ignition switch is in ON position. |
|
Drive Mode (AMT) |
|
Applicable to AMT variant of the vehicle. “M” indicates Manual Drive mode. “A” indicated Automatic Drive mode. |
| Current Gear Indication |
|
Current gear engaged by the transmission shall be displayed on DIS. This feature is applicable to both AMT and Manual transmission variant. In case of Manual transmission, the gear display is as per the User selection. IN case of AMT, the display is as per the Automatic selected gear. Note: 1. If is displayed, it means ‘Fault’ condition. In such case, take vehicle to authorized TATA MOTORS service station. In case of Manual Transmission the Gear number will be displayed when the clutch is fully released. |
Neutral
Reverse| Driver Information | System Image |
Description |
| Rotate steering |
|
“ROTATE STEERING” text warning comes ‘ON’ for 4 seconds when electronic steering column is in locked state. Rotate Steering slightly (left or right) to unlock it. Note: If text warning “ROTATE STEERING” is displayed even after rotating the steering, it means ‘Faulty’ condition. In such case, take vehicle to authorized TATA MOTORS service station. |
| Key Batt Low (Applicable for PEPS vehicle) |  |
“KEY BATT LOW” text warning comes ‘ON’ for 4 seconds when UID key battery is low. |
| Key out of Range (Applicable for PEPS vehicle) |  |
“KEY OUT OF RANGE” text warning comes ‘ON’ for 4 seconds when UID key is not inside the vehicle. |
| Press Clutch (Applicable for PEPS
vehicle) |
 |
“PRESS CLUTCH” text warning comes ‘ON’ for 4 seconds when clutch is not pressed to crank the vehicle. Note: This text warning is applicable for MT vehicle. |
| Press Brake
(Applicable for PEPS vehicle) |
 |
“PRESS BRAKE” text warning comes ‘ON’ for 4 seconds when BRAKE is not pressed to crank the vehicle. Note: This text warning is applicable for AMT/AT vehicle. |
| Driver Information | System Image | Description |
| Service due |  |
“SERVICE DUE” text warning comes ‘ON’ for 4 seconds when service is overdue. |
| Low Brake Fluid |  |
“LOW BRAKE FLUID” text warning comes ‘ON’ for 4 seconds when brake fluid is low. |
| Low Fuel |  |
“LOW FUEL” text warning comes ‘ON’ for 4 seconds when low fuel warning telltale comes ‘ON’ and fuel level is low. |
| Over Speed |  |
“OVER SPEED” text warning comes ‘ON’ for 4 seconds when display speed crosses 120 Km/Hr. |
| Take a Break |
|
“TAKE A BREAK” text warning comes ‘ON’ for 4 seconds when driver drives continuously for prolonged duration. Note: TAKE A BREAK” text warning comes ‘ON’ for 4 seconds again with specific duration if vehicle is not stopped and continuously driven. |
| Engine Locked |  |
“ENGINE LOCKED” text warning comes ‘ON’ for 4 seconds when engine is unable to crank. |
| TATA MOTORS |  |
“TATA MOTORS” text warning comes ‘ON’ for 4 seconds when ignition is turned ‘ON’. This is part of the welcome strategy. |
Instantaneous fuel economy
It indicates fuel economy of current drive when Ignition is turned ‘ON’. The display does not show actual value unless vehicle is moving.
NOTE
- IFE will vary frequently as per driving pattern.
- IFE display does not show Fuel Economy of last drive.
- The indication on the display screen may be delayed if fuel consumption is affected by driving pattern.
- For km/l setting, the indicated maximum value of INST FE is 30 km/l. No more than 30 shall be indicated on the display even if the actual INST FE is higher than 30 km/l.
Average fuel economy (AFE)
Average Fuel Economy A/B will reset to ‘0’ whenever Trip meter A/B is reset. Average Fuel Economy will be displayed as ‘–.–‘ for initial 0.5 km of respective trip. Once 0.5 km distance is covered, Average Fuel Economy will be displayed. Even after 0.5 km distance covered for particular trip, if Average Fuel Economy is displayed as ‘–.–‘, then take your vehicle to TATA MOTORS Authorized Service Centre.
NOTE
- AFE value is estimate of fuel economy. It may vary significantly based upon driving conditions, driving habits and condition of vehicle.
- Average fuel consumption will get Reset to ‘0’when battery is re-moved and refitted.
- For AFE, the indicated maximum value is 30 km/l. No more than 30 shall be indicated on the dis-play even if the actual AFE is higher than 30 km/l.
Distance to empty (DTE)
It indicates approximate distance in ‘km’ that your vehicle can travel with available fuel in tank. DTE values may vary significantly based on driving conditions, driving habits, and condition of the vehicle. It is an estimate value of the available driving distance. The DTE will update with new value when fuel is added more than 5 Litres at a time. If low fuel warning light turns ‘ON’, fill the fuel tank immediately regardless the value of displayed DTE. The distance to empty value is an estimate of the available driving distance. DTE will provide rolling text warning as ‘Refuel’ at approximately 25 km distance to empty. DTE working range is from 25 km to 1999 km. If vehicle is not on level ground and negative of battery has been disturbed, the DTE function may not operate correctly.
NOTE
- If DTE is displayed as ‘—‘, take vehicle to authorized TATA MOTORS service station.
- The DTE will update with new value when fuel is added more than 5 Liters at a time.
- The average fuel consumption and distance to empty values may vary significantly based on driving conditions, driving habits, and condition of the vehicle.
- The distance to empty value is an estimate of the available driving distance.
- If low fuel warning light comes ON, fill the fuel tank immediately regardless the value of displayed DTE.
- If vehicle is not on level ground and negative of battery has been disturbed, the DTE function may not operate correctly.
Driver Information System (DIS) setting
Driver Information Settings for Illumination and Clock setting 
Instrument Cluster Illumination 
For Instrument Cluster illumination level settings, it is necessary to turn the Park Lamp ‘ON’ and then Press the ‘SET’ knob on Instrument Cluster. Press ‘SET’ knob to change the illumination intensity level in 5 steps. A delayed press on the ‘SET’ knob for a selected intensity will confirm it.
WARNING
The Clock and Instrument Cluster Illumination settings should be done only when the vehicle is in stationary condition for safety purpose.
Useful Link
View Full PDF: 2020 Tata Tigor BS VI Owner’s Manual | Auto User Guide
2020 Tata Tigor BS VI Keys and Smart key User Guide