2024 Toyota Prius Prime Meter Display Owner’s Manual
The meter display on the 2024 Toyota Prius Prime has an elegant design that combines easy-to-use navigation controls with essential vehicle data. Its bright, high-resolution screen makes driving more enjoyable while encouraging efficiency and sustainability by giving drivers simple access to vital information and good visibility.
2024 Prius Prime Review, Specs, Price And Mileage (Brochure)
Toyota Gauges and Meters Guide
The meters display various drive information.
Meter display
The main meter in the centre position
The units used on the meter and display may differ depending on the target region.
- Outside temperature
- Hybrid System Indicator
Displays hybrid system output or regeneration level. - Shift position indicator
Displays the selected shift position. - Clock
The GPS clock’s time is automatically adjusted by utilizing GPS time information. For details, refer to the “MULTIMEDIA OWNER’S MANUAL”. - Fuel gauge
Displays the quantity of fuel remaining in the tank. - EV driving range/EV energy remaining
The content can be switched through a customized setting. EV driving range:
Displays the EV driving range with charge remaining in the hybrid battery (traction battery).EV energy remaining:
Displays the amount of charge remaining in the traction battery. - Distance to empty
Displays driving range with the remaining fuel. - Speedometer
Displays the vehicle speed. - SOC (State of Charge) gauge
Displays the amount of charge remaining in the traction battery. - Odometer, trip meter and oil maintenance
Odometer:
Displays the total distance that the vehicle has been driven.
Trip meter:
Displays the distance the vehicle has been driven since the meter was last reset. Trip meters “A” and “B” can be used to record and display different distances independently.
Oil maintenance:
Displays the distance until the next engine oil change.
The main meter moved to the right
The units used on the meter and display may differ depending on the target region.
- Outside temperature
- B Multi-information display
Presents the driver with a variety of driving-related data. Displays warning messages if a malfunction occurs. - Hybrid System Indicator
Displays hybrid system output or regeneration level. - Clock
The GPS clock’s time is automatically adjusted by utilizing GPS time information. For details, refer to the “MULTIMEDIA OWNER’S MANUAL”. - Shift position indicator
Displays the selected shift position - Fuel gauge
Displays the quantity of fuel remaining in the tank. - EV driving range/EV energy remaining
The content can be switched through a customized setting. EV driving range:
Displays the EV driving range with charge remaining in the hybrid battery (traction battery).
EV energy remaining:
Displays the amount of charge remaining in the traction battery. - Distance to empty
Displays driving range with the remaining fuel. - Speedometer
Displays the vehicle speed. - SOC (State of Charge) gauge
Displays the amount of charge remaining in the traction battery. - Odometer, trip meter and oil maintenance
Odometer:
Displays the total distance that the vehicle has been driven.
Trip meter:
Displays the distance the vehicle has been driven since the meter was last reset. Trip meters “A” and “B” can be used to record and display different distances independently.
Oil maintenance:
Displays the distance until the next engine oil change.
The meters and display illuminate when
Hybrid System Indicator
- Charge area
Shows regeneration status. Regenerated energy will be used to charge the hybrid battery (traction battery). - Eco area
Shows that the vehicle is being driven in an Eco-friendly manner.
By keeping the indicator needle within the Eco area, more Eco-friendly driving can be achieved. - Power area
Shows that an Eco-friendly driving range is being exceeded (during full power driving etc.) - Hybrid Eco area (HV mode)
Shows that gasoline engine power is not being used very often.
The gasoline engine will automati-cally stop and restart under various conditions. - EV driving area (EV mode or AUTO EV/HV mode)
Shows that the vehicle is driven using only the electric motor (traction motor).
When used in this manual, “regeneration” refers to the conversion of energy created by the movement of the vehicle into electrical energy.
In the following situation, the Hybrid System Indicator does not operate.
- The “READY” indicator is not illuminated.
- The shift position is in a position other than D or B.
SOC (State of Charge) gauge
Displays the current amount of charge remaining in the traction bat-tery.
- The remaining battery for EV driv-ing in EV mode is displayed in green, and the remaining battery used in HV mode is displayed in blue.
- The amount of the remaining bat-tery displayed decreases as the vehicle is driven and increases when the hybrid battery (traction battery) is charged, electrical energy is regenerated using regenerative braking or electricity is generated by the gasoline engine.
- If the remaining battery is not displayed in green, HV mode is automatically selected and EV mode cannot be used. To enable EV driving, charge the hybrid battery (traction battery).
- The hybrid battery (traction bat-tery) is fully charged
- The hybrid battery (traction bat-tery) for EV mode does not remain
Distance to empty
- This distance is computed based on your average fuel consump-tion. As a result, the actual distance that can be driven may differ from that displayed.
- When only a small amount of fuel is added to the tank, the display may not be updated. When refuelling, turn the power switch off. If the vehicle is refuelled without turning the power switch off, the display may not be updated.
- When “Refuel” is displayed, the remaining fuel amount is low and the distance that can be driven with the remaining fuel cannot be calculated. Refuel immediately.
EV driving range
- When the air conditioning system is operating, is displayed next to the EV driving range and the EV driving range with the air conditioning system on is displayed.
- The EV driving range may shorten even when not driving due to power consumption by the sys-tem.
- For details, refer to “EV driving range”
Outside temperature display
- Displays the outside temperature within the range of -40°F (-40°C) to 140°F (60°C).
- When the outside temperature is approximately 37°F (3°C) or lower, the indicator will flash for approximately 10 seconds, then stay on.
- In the following situations, the cor-rect outside temperature may not be displayed, or the display may take longer than normal to change.
- When stopped, or driving at low speeds (less than 12 mph [20 km/h])
- When the outside temperature has changed suddenly (at the entrance/exit of a garage, tunnel, etc.)
- When “–” or “E” is displayed, the system may be malfunctioning. Take your vehicle to your Toyota dealer.
Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is characteristic of liquid crystal displays, and there is no problem continuing to use the display.
Open Source Software Informa-tion
Copyright (c) 2009-2018 ARM Lim-ited.
Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.
WARNING
The information displayed at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal information display. At extremely low temperatures, the display monitor may respond slowly, and display changes may be delayed.
NOTICE
To prevent damage to the engine and its components
The engine may be overheating if “Engine Coolant Temp High Stop in a Safe Place See Owner’s Manual” is shown on the multi-information display. In this case, immediately stop the vehicle in a safe place, and check the engine after it has cooled completely.
2024 Prius Prime Review, Specs, Price And Mileage (Brochure)
Switching the meter display
The multi-information display can be switched between display and hidden.
Using the “ODO TRIP” switch
Switches the items of the odometer, trip meter A, trip meter B and (oil maintenance) by pressing the “ODO TRIP” switch.
When the trip meter is displayed, pressing and holding the switch will reset the trip meter.
Pop-up display
The distance until the next engine oil change will be displayed when a warning message indicating that oil maintenance is required or should be performed soon is displayed.
Adjusting meter brightness
The meter brightness can be adjusted.
- Darker
- Brighter
Brightness of the meter lights (day mode and night mode)
The brightness of the meter lights can be adjusted individually.
In the following situations, the meters change between day mode and night mode.
- Day mode: When the tail lights are off or when the tail lights are on but the surrounding area is bright
- Night mode: When the tail lights are on and the surrounding area is dark
FAQs
The 2024 Toyota Prius Prime Meter Display shows various driving metrics and information upon startup.
The 2024 Toyota Prius Prime Meter Display provides real-time feedback on driving habits to encourage eco-friendly driving practices, thus optimizing fuel efficiency.
Yes, drivers can personalize the display settings on the 2024 Toyota Prius Prime Meter Display according to their preferences and needs.
The 2024 Toyota Prius Prime Meter Display may show alerts and warnings related to safety systems, such as lane departure warnings or collision avoidance notifications.
The 2024 Toyota Prius Prime Meter Display provides insights into battery consumption and regeneration, allowing drivers to monitor and manage their usage effectively.
Yes, the 2024 Toyota Prius Prime Meter Display visually illustrates the flow of energy between the engine, battery, and electric motors, offering a comprehensive view of the hybrid system’s operation.
The 2024 Toyota Prius Prime Meter Display records driving data and provides historical efficiency metrics, enabling drivers to analyze and improve their driving habits over time.
The 2024 Toyota Prius Prime Meter Display offers visual cues and feedback on driving behaviour, encouraging drivers to adopt eco-conscious practices such as smooth acceleration and braking.
By displaying vital information such as speed, fuel level, and system status, the 2024 Toyota Prius Prime Meter Display keeps drivers informed and focused on the road ahead.
Yes, drivers have the flexibility to customize the layout and content of the 2024 Toyota Prius Prime Meter Display to prioritize the information most relevant to them while driving.
The 2024 Toyota Prius Prime Meter Display offers dynamic visuals and interactive features that make driving more interactive and enjoyable for the driver.
Yes, the 2024 Toyota Prius Prime Meter Display provides real-time feedback on regenerative braking effectiveness, helping drivers maximize energy recapture during deceleration.
The 2024 Toyota Prius Prime Meter Display offers access to diagnostic information and maintenance reminders to ensure the vehicle is always in optimal condition.
By promoting efficient driving practices and hybrid system optimization, the 2024 Toyota Prius Prime Meter Display helps minimize fuel consumption and, consequently, greenhouse gas emissions.
Yes, the 2024 Toyota Prius Prime Meter Display may offer connectivity features that allow integration with external devices or smartphone apps for enhanced functionality and convenience.
Depending on the model and features, the 2024 Toyota Prius Prime Meter Display may provide real-time traffic updates and navigation guidance to assist drivers during their journeys.
Useful Links
View Full PDF: 2024 Toyota Prius Prime Owners Manual | Auto User Guide
2024 Prius Prime Review, Specs, Price And Mileage (Brochure)