Table of Contents
Toggle2023 Hyundai Elantra Fuses and Fuse Box User Guide
This tutorial covers the 2023 Hyundai Elantra Fuses and Fuse Box, covering fuses, their functions, and how to properly repair them to maintain your vehicle’s electrical systems.
2023 Hyundai Elantra Specs, Price, Features, Milage (Brochure)
Fuses

A vehicle’s electrical system is protected from electrical overload damage by fuses.
This vehicle has 2 (or 3) fuse panels, one located in the driver’s side panel bolster, the other in the engine compartment near the battery.
If any of your vehicle’s lights, accessories, or controls do not work, check the appropriate circuit fuse. If a fuse has blown, the element inside the fuse will be melted or broken.
If the electrical system does not work, first check the driver’s side fuse panel. Before replacing a blown fuse, turn the engine and all switches off, and then disconnect the negative battery cable. Always replace a blown fuse with one of the same rating.
If the replacement fuse blows, this indicates an electrical problem.
Avoid using the system involved and immediately consult an authorized HYUNDAI dealer.
WARNING
NEVER replace a fuse with anything but another fuse of the same rating.
- A higher capacity fuse could cause damage and possibly cause a fire.
- Do not install a wire or aluminum foil instead of the proper fuse – even as a temporary repair. It may cause extensive wiring damage and possibly a fire.
NOTICE
Do not use a screwdriver or any other metal object to remove fuses because it may cause a short circuit and damage the system.
Instrument Panel Fuse Replacement

- Turn the vehicle off.
- Turn all other switches OFF.
- Open the fuse panel cover.
- Refer to the label on the inside of the fuse panel cover to locate the suspected fuse location.

- Pull the suspected fuse straight out. Use the removal tool provided in the engine compartment fuse panel.
- Check the removed fuse; replace it if it is blown. Spare fuses are provided in the engine compartment fuse panel.
- Push in a new fuse of the same rating, and make sure it fits tightly in the clips. If it fits loosely, consult an authorized HYUNDAI dealer.
In an emergency, if you do not have a spare fuse, use a fuse of the same rating from a circuit you may not need for operating the vehicle.
If the other electrical components do not work and the fuses are undamaged, check the fuse panel in the engine compartment. If a fuse is blown, it must be replaced with the same rating.
If the headlight, turn signal lamp, tail lamp, or interior lamp doesn’t work and the fuses are undamaged, consult an authorized HYUNDAI dealer.
Engine Compartment Panel Fuse Replacement

- Turn the engine off.
- Turn all other switches OFF.
- Remove the fuse panel cover by pressing the tap and pulling up.
- Check the removed fuse; replace it if it is blown. To remove or insert the fuse, use the fuse puller in the engine compartment fuse panel.
- Push in a new fuse of the same rating, and make sure it fits tightly in the clips. If it fits loosely, consult an authorized HYUNDAI dealer.
CAUTION
After checking the fuse box for Hyundai Elantra in the engine compartment securely close the fuse box cover inside the engine compartment, until it clicks.
If the fuse box for hyundai elantra is not closed properly, water may leak inside, possibly causing a malfunction with the electrical system.
Multi fuse (Main fuse)

If the multi fuse is blown, it must be removed as follows:
- Turn off the engine.
- Disconnect the negative battery cable.
- Remove the fuse panel cover by pressing the tab and pulling it up.
- Remove the nuts shown in the picture above.
- Replace the fuse with a new one of the same rating.
- Reinstall in the reverse order of removal.
Information
If the multi fuse is blown, consult an authorized HYUNDAI dealer.
Fuse/Relay Panel Description
Instrument panel fuse panel

Inside the fuse/relay box cover, you can find the fuse/relay label describing fuse/relay names and ratings.
Information
Not all fuse panel descriptions in this manual may be applicable to your vehicle; the information is accurate at the time of printing. When you inspect the fuse box on your vehicle, refer to the fuse box label.

| Fuse Name | Fuse Rating | Circuit Protected |
| MEMORY1 | 10A | Instrument Cluster, A/C Controller, A/C Control Module, DRV/PASS Folding Outside Mirror |
| AIR BAG2 | 10A | SRS Control Module |
| MODULE4 | 10A | Lane Keeping Assist Unit (LINE), Crash Pad Switch, IBU, A/T Shift Lever Indicator, Front Console Switch |
| MODULE7 | 7.5A | IAU, Cooling fan controller (N Line only), Rear Seat Warmer Control Module |
|
START |
7.5A |
Burglar Alarm Relay, Transaxle Range Switch, PCM/ ECMIBU, E/R Junction Block (Start Relay) (Smartstream G 2.0 Atkinson only) |
| CLUSTER | 7.5A | Instrument Cluster |
| IBU2 | 7.5A | IBU |
| A/C1 | 7.5A | E/R Junction Block (PTC Heater Relay, Blower Relay), A/C Control Module, A/C Controller |
| TRUNK | 10A | Trunk Lid Latch |
| S/HEATER FRT | 20A | Front Seat Warmer Control Module |
| P/WINDOW LH | 25A | Power Window Main Switch |
| MULTIMEDIA | 15A | Audio, A/V & Navigation Head Unit, DC-DC Converter (Smartstream G 2.0 Atkinson ISG only) |
| FCA | 10A | Forward Collision-Avoidance Assist Unit |
| MDPS *1 | 7.5A | MDPS Unit |
| MODULE6 | 7.5A | IBU |
| S/HEATER RR | 20A | Rear Seat Warmer Control Module |
| SAFETY P/ WINDOW DRV | 25A | Driver Safety Power Window Module |
| P/WINDOW RH | 25A | Power Window Main Switch, Passenger Power Window Switch |
| BRAKE SWITCH | 10A | Stop Lamp Switch, IBU |
| IBU1 | 15A | IBU |
*1 : MDPS (Motor Driven Power Steering) is the same as EPS (Electric Power Steering)
Driver’s side fuse panel
| Fuse Name | Fuse Rating | Circuit Protected |
|
MODULE2 |
10A |
E/R Junction Block (Power Outlet Relay), AMP, IBU, IAU, Audio, Power Outside Mirror Switch, DC-DC Converter (Smartstream G 2.0 Atkinson ISG only), A/V & Navigation Head Unit |
| AIR BAG1 | 15A | SRS Control Module, Passenger Occupant Detection Sensor |
|
MODULE5 |
10A |
A/T Shift Lever Indicator, Front Wireless Charger, A/C Controller, Electro Chromic Mirror, A/C Control Module, Audio, A/V & Navigation Head Unit, AMP, DC-DC Converter (Smartstream G 2.0 Atkinson ISG only), Data Link Connector, Rear Seat Warmer Control Module, Front Seat Warmer Control Module |
| AMP | 25A | AMP, DC-DC Converter (Smartstream G 2.0 Atkinson ISG only) |
| HEATED MIRROR | 10A | DRV/PAS Outside Mirror Heated, A/C Control Module, A/C Controller, ECU (N Line only) |
| DOOR LOCK | 20A | Door Lock/Unlock Actuator |
| IAU | 10A | BLE Unit, IAU, Driver/Passenger Door NFC Module |
| MODULE3 | 7.5A | Sport Mode Switch, Stop Lamp Switch, IAU |
| A/BAG IND | 7.5A | Instrument Cluster, Overhead Console Lamp |
| WASHER | 15A | Multifunction Switch |
| P/SEATPASS | 30A | Power Seat |
| P/SEATDRV | 30A | Power Seat |
| WIPER | 10A | PCM/ECM, IBU |
|
MODULE1 |
10A |
Driver/Passenger Smart Key Outside Handle, Crash Pad Switch, Sport Mode Switch, Data Link Connector, Hazard Switch, Key Solenoid |
| SUNROOF | 20A | Sunroof Motor |
| USB CHARGER | 15A | Front USB Charger |
| IG1 | 25A | PCB Block (Fuse – ABS3, ECU5, EOP2, TCU2) |
Engine compartment fuse panel

Inside the fuse/relay box cover, you can find the fuse/relay label describing fuse/relay names and ratings.
Information
Not all fuse panel descriptions in this manual may be applicable to your vehicle; the information is accurate at the time of printing. When you inspect the fuse panel in your vehicle, refer to the fuse panel label.

Engine compartment fuse panel
| Type | Fuse Name | Fuse Rating | Circuit Protected |
|
MULTI FUSE-3 |
ALT |
150A 180A |
[Smartstream G 2.0 Atkinson with AMS2] Alternator, (Fuse – ABS1, ABS2, EOP1, POWER OUTLET1)
[Smartstream G 2.0 Atkinson & Smartstream G1.6 T-GDi without AMS2] Alternator, (Fuse – ABS1, ABS2, POWER OUTLET1) |
| MDPS1 | 80A | MDPS Unit | |
| MULTI FUSE-2 | COOLING FAN2 | 60A | [G4FP] Cooling Fan Controller |
| DCT3 | 40A | [G4FP] SGA | |
| MULTI FUSE-1 | B+5 | 60A | PCB Block (Engine Control Relay, Fuse – ECU3, ECU4, HORN, WIPER, A/C) |
| B+1 | 60A | ICU Junction Block (IPS2/IPS5/IPS6/IPS7/ IPS14) | |
| B+2 | 60A | ICU Junction Block (IPS1/IPS4/IPS8/IPS9/ IPS10) | |
| B+3 | 50A | ICU Junction Block (Fuse – TRUNK, AMP, SAFETY P/WINDOW DRV, P/SEAT DRV, P/ SEAT PASS, S/HEATER FRT, S/HEATER RR, Long-Term Load Latch Relay) |
|
| EPB | 60A | ESC Control Module | |
| PTC HEATER | 50A | PTC HEATER | |
| BLOWER | 40A | BLOWER Motor, Multipurpose Check Connector | |
| IG1 | 40A | E/R Junction Block (PDM (IG1/ACC) Relay), Ignition Switch | |
| IG2 | 40A | E/R Junction Block (PDM (IG2) Relay, Start Relay), Ignition Switch |
Engine compartment fuse panel
| Type | Fuse Name | Fuse Rating | Circuit Protected |
| FUSE | POWER OUTLET2 | 20A | Front Power Outlet |
| POWER OUTLET3 | 20A | Not Used | |
| COOLING FAN1 | 40A | Cooling Fan (Smartstream G 2.0 Atkinson only) | |
| DCT1 | 40A | [G4FP] TCM | |
| DCT2 | 40A | [G4FP] TCM | |
| REAR HEATED | 40A | Rear Glass Heated | |
| B+4 | 40A | ICU Junction Block (Fuse – AIR BAG2, IBU1, BRAKE SWITCH, DOOR LOCK, IAU, MODULE1, SUNROOF, Power Window Relay) |
|
| AMS | 10A | Battery Sensor | |
| TCU1 | 10A | [DCT] TCM, [M/T] Ignition Lock | |
| FUEL PUMP | 20A | Fuel Pump Control Module (T-GDI), Fuel Pump Motor (NU MPI AKS) | |
| CVVD | 40A | [G4FP] CVVD Actuator | |
| ABS1 | 40A | ABS Control Module, ESC Control Module, Multipurpose Check Connector | |
| ABS2 | 30A | ABS Control Module, ESC Control Module, Multipurpose Check Connector | |
| EOP1 | 30A | Electronic Oil Pump (Smartstream G 2.0 Atkinson ISG only) | |
| POWER OUTLET1 | 40A | P/OUTLET FRT |
Engine compartment fuse panel
| Fuse Name | Fuse Rating | Circuit Protected |
| WIPER | 25A | Wiper Motor |
| ECU4 | 15A | PCM/ECM |
| A/C | 10A | [G4FM] A/C Compressor (Smartstream G 2.0 Atkinson only) |
| HORN | 15A | Horn |
| IGN COIL | 20A | Ignition Coil #1~#4 |
| ECU3 | 15A | PCM/ECM |
| SENSOR3 | 10A | E/R Junction Block (Fuel Pump Relay) |
| ECU2 | 10A | PCM/ECM (Smartstream G1.6 T-GDi only) |
| SENSOR2 | 10A | [G4NS] Variable Intake Solenoid Valve, Oil Pump Solenoid Valve, Oil Control Valve #1/#2, Canister Close Valve, Purge Control Solenoid Valve,
PCB Block (A/C Relay), E/R Junction Block (Cooling Fan1/2 Relay) [G4FP] Variable Oil Pump Solenoid, Oil Control Valve #1/#2, Purge ControL Solenoid Valve, RCV Control Solenoid Valve, CanisteR Close Valve |
| ECU5 | 10A | CVVD Actuator (Smartstream G1.6 T-GDi only), ECM/ PCM, Ignition Lock |
| SENSOR1 | 15A | Oxygen Sensor (UP/DOWN) |
| ABS3 | 10A | ABS Control Module, ESC Control Module, Multipurpose Check Connector |
| INJECTOR | 15A | [G4FM/G4FG/G4NA] Injector #1~#4 (Smartstream G 2.0 Atkinson only) |
| ECU1 | 20A | PCM/ECM |
| TCU2 | 15A | Transaxle Range Switch, [G4FP] TCM (Smartstream G1.6 T-GDi & DCT only) |
FAQ’s
The fuse box in the 2023 Hyundai Elantra is typically located under the dashboard on the driver’s side and another one in the engine compartment.
To access the fuse box, open the cover by pressing the latch or pulling the tab. The exact method may vary slightly depending on the specific location of the fuse box.
If a fuse blows, replace it with a new fuse of the same amperage. Always turn off the car’s electrical system before replacing a fuse to avoid injury or damage.
The 2023 Hyundai Elantra uses several types of fuses, including mini blade fuses and regular blade fuses, each rated for different amperages.
Common problems include blown fuses due to electrical shorts, overloading circuits, or faulty components drawing excessive current.
Useful Link
View Full PDF: 2023 Hyundai Elantra User Guide | Auto User Guide
2023 Hyundai Elantra Review, Price, Features and Mileage (brochure)
