Suzuki New ERTIGA 2020 Keyless Push Start Type B User Manual
Keyless Push Start Type B
When the remote controller is within the operating range described in this section, you can lock or unlock the doors (including the tailgate) by pushing the request switch (1) on the driver’s door handle, front passenger’s door handle, or tailgate (2).
To lock all doors when all doors are unlocked:
- To lock all doors, push one of the requested switches once.
The turn signal lights will flash once and the exterior buzzer will sound once when the doors are locked.
To unlock a door or all doors:
- Push one of the request switches once to unlock the respective door or the tailgate.
Push one of the requests switches twice to unlock all doors.
NOTE:
You can switch the function that unlocks all doors from twice operations to once operation, and vice versa, via the setting mode of the information display. For details on how to use the information display, refer to “Information Display” in this section.
When the doors are unlocked:
The turn signal lights will flash twice and the exterior buzzer will sound twice.
If the interior dome light switch is in the DOOR position, the interior dome light will turn on for about 15 seconds and then fade out. If you press the engine switch during this time period, the light will start to fade out immediately. Be sure the doors are locked after you operate the request switch to lock the doors.
NOTE:
- The door locks cannot be operated by the request switch under the following conditions:
- If any door or tailgate is open or is not completely closed.
- If the ignition mode is other than “LOCK” (OFF).
- If no doors are opened within about 30 seconds after unlocking the doors by pushing the request switch, the doors will be locked again automatically.
(1) 80 cm (2 1/2 feet)
When the remote controller is within approximately 80 cm (2 1/2 feet) from a front door handle or the tailgate switch, which is specified as the operating range, you can lock or unlock the doors by pushing the request switch.
NOTE:
- If the remote controller is outside the operating range described above, you will not be able to operate the request switch.
- If the battery of the remote controller runs down or there are strong radio waves or noise, the operating range may be reduced or the remote controller may become inoperative.
- If the remote controller is too close to the door glass, the request switches may not operate.
- If a spare remote controller is in the vehicle, the request switches may not operate normally.
- The remote controller will only activate a request switch if it is within the activate operating range. For example, if the remote controller is within the operating range for the driver’s door request switch but not for the front passenger’s door request switch not for the tailgate request switch, the driver’s door switch can be operated but the front passenger’s door switch or tailgate switch cannot be operated.
NOTICE
The remote controller is a sensitive electronic instrument. To avoid damaging the remote controller:
- Do not expose it to impacts, moisture or high temperature such as by leaving it on the dashboard under direct sunlight.
Keep the remote controller away from magnetic objects such as a television.
NOTE:
The keyless push start system may not function correctly in certain environments or under certain operating conditions such as the followings:
- When there is strong electromagnetic waves coming from a television, power station or cellular phone.
- When the remote controller is in contact with or covered by a metal object.
- When a radio wave type remote keyless entry is used nearby.
- When the remote controller is placed near an electronic device such as a personal computer.
Some additional precautions you should take and information you should be aware of are:
- Make sure the key is always stowed in the remote controller. If the remote controller becomes unusable, you will not be able to lock or unlock the doors without the key.
- Make sure that the driver always carries the remote controller.
- If you lose one of the remote controllers, ask a SUZUKI dealer or a qualified workshop as soon as possible for a replacement. Be sure to have your dealer program the new remote controller code in your vehicle’s memory so that the old code is erased.
- You can use up to four remote controllers and the keys for your vehicle. Ask a SUZUKI dealer or a qualified workshop for details.
- The battery life of the remote controller is about two years, but it can vary depending on usage conditions.
- To stow the key into the remote controller, push the key in the remote controller until you hear a click.
To remove the key from the remote controller, slide the lock knob (A) in the direction of the arrow and pull the key out from the remote controller.
Reference Links
View Full User Guide: Suzuki New ERTIGA 2020 User Manual
Download Manuals: https://suzuki-aftersales.net/manuals
