2023 Toyota Camry Using the air conditioning system and defogger

You can master climate control in the 2023 Toyota Camry in a way that combines comfort and usefulness. Thanks to its high-tech air conditioning system, both drivers and guests can enjoy a comfortable and cool interior. With the touch of a button, you can easily turn on the air conditioning, fine-tune the temperature, and choose from different modes to fit your tastes, such as “Max A/C” for cool air and “Eco” for balanced energy efficiency. The Camry’s defogger is also ready to clear out foggy windows and make sure you can see clearly on foggy mornings or bad weather days. This full climate control system, which includes choices for airflow and fan speed changes, gives the 2023 Toyota Camry a whole new level of climate customization and comfort inside, making every drive a pleasure.

2023 Toyota Camry Specs, Price, Features and Mileage (Brochure)

Manual air conditioning system

Air conditioning controls

Adjusting the temperature setting
To adjust the temperature setting, turn clockwise to increase the temperature and counterclockwise to decrease the temperature.
If is not pressed, the system will blow ambient temperature air or heated air.

Fan speed setting

• To adjust the fan speed, turn clockwise to increase the fan speed and counterclockwise to decrease the fan speed.
• Turning the dial to “OFF” turns off the fan.

Change the airflow mode

• To change the airflow mode, press, or .
• Air flows to the upper body.
• Air flows to the upper body and feet.
• Air flows to the feet.
• Air flows to the feet and the windshield defogger operates.

Other functions

Switching between outside air and recirculated air modes Press.

• The mode switches between outside air mode (indicator off) and recirculated air mode (indicator on) each time is pressed.
• Defogging the windshield
• Defoggers are used to defog the windshield and front side windows. Press.
• If the recirculated air mode is used, it will automatically switch to the outside air mode.

Perform the following operations accordingly:

• To adjust the fan speed, turn.
• To adjust the temperature setting, turn.
• If the dehumidification function is not operating, press to operate the dehumidification function.
• To defog the windshield and the side windows early, turn the airflow and temperature up.
• Defogging the rear window and outside rearview mirrors

Vehicles without outside rear view mirror defoggers

• A defogger is used to defog the rear window.
•  The defogger will automatically turn off after some time.

Vehicles with outside rear view mirror defoggers

• Defoggers are used to defog the rear window and to remove raindrops, dew and frost from the outside rearview mirrors.
• The defoggers will automatically turn off after some time.

Air outlets

Location of air outlets
The air outlets and air volume change according to the selected airflow mode.

Adjusting the position of and opening and closing the air outlets

• Direct air flow to the left or right, up or down.
• Turn the knob to open or close the vent.

For quick cooling

Turn to “MAX A/C”. The air conditioning will automatically turn on. will be set for recirculated air mode when or is selected. It is not possible to turn to the outside air mode.

Fogging up of the windows

• The windows will easily fog up when the humidity in the vehicle is high.
• Turning on will dehumidify the air from the outlets and defog the windshield effectively.
• If you turn off, the windows may fog up more easily.
• The windows may fog up if the recirculated air mode is used.

When driving on dusty roads
Close all windows. If dust thrown up by the vehicle is still drawn into the vehicle after closing the windows, it is recommended that the air intake mode be set to outside air mode and the fan speed to any setting except off.

Outside/recirculated air mode
Setting to the recirculated air mode temporarily is recommended to prevent dirty air from entering the vehicle interior and helping to cool the vehicle when the outside air temperature is high.
Outside/recirculated air mode may automatically switch depending on the temperature setting or the inside temperature.

When the outside temperature exceeds 75°F (24°C) and the air conditioning system is on

• To reduce the air conditioning power consumption, the air conditioning system may switch to recirculated air mode automatically. This may also reduce fuel consumption.
• Vehicles without a smart key system:
• Recirculated air mode is selected as a default mode when the engine switch is turned to the “ON” position.
• Vehicles with a smart key system:
• Recirculated air mode is selected as a default mode when the engine switch is turned to IGNITION ON mode.
• It is possible to switch to outside air mode at any time by pressing.

When the outside temperature is low

• The dehumidification function may not operate even when is pressed.
• Ventilation and air conditioning odors
• To let fresh air in, set the air conditioning system to the outside air mode.
• During use, various odors from inside and outside the vehicle may enter into and accumulate in the air conditioning system. This may then cause odor to be emitted from the vents.
• To reduce potential odors from occurring:
• It is recommended that the air conditioning system be set to outside air mode prior to turning the vehicle off.

Air conditioning filter 
Air conditioning system refrigerant
A label regarding the refrigerant of the air conditioning system is attached to the hood at the location shown in the illustration.

The meaning of each symbol on the label are as follows:

WARNING.

• To prevent the windshield from fogging up
• Do not use during cool air operation in extremely humid weather.
• The difference between the temperature of the outside air and that of the windshield can cause the outer surface of the windshield to fog up, blocking your vision.
• Do not place anything on the instrument panel which may cover the air outlets.
• Otherwise, air flow may be obstructed, preventing the windshield defoggers from defogging
• To prevent burns (vehicles with outside rear view mirror defoggers)
• Do not touch the rear view mirror surfaces when the outside rearview mirror defoggers are on.

NOTICE

• To prevent battery discharge
• Do not leave the air conditioning system on longer than necessary when the engine is stopped.
• When repairing/replacing parts of the air conditioning system
• Have repair/replacement performed by your Toyota dealer.
• When a part of the air conditioning system, such as the evaporator, is to be replaced, it must be replaced with a new one

Automatic air conditioning system (without “SYNC” button)

Air outlets and fan speeds are automatically adjusted according to the temperature setting.

Air conditioning controls

Adjusting the temperature setting

To adjust the temperature setting, turn clockwise to increase the temperature and counterclockwise to decrease the temperature.
If is not pressed, the system will blow ambient temperature air or heated air.

Fan speed setting

• To adjust the fan speed, turn clockwise to increase the fan speed and counterclockwise to decrease the fan speed.
• Press to turn the fan off.

Change the airflow mode

• To change the airflow mode, press “<” or “>” on .
• Air flows to the upper body.
• Air flows to the upper body and feet.
• Air flows to the feet.
• Air flows to the feet and the windshield defogger operates.

Using automatic mode

• Press.
• The dehumidification function begins to operate. Air outlets and fan speed are automatically adjusted according to the temperature setting.
• Adjust the temperature setting.
• To stop the operation, press .

Automatic mode indicator

• If the fan speed setting or air flow modes are operated, the automatic mode indicator goes off. However, automatic mode for functions other than that operated is maintained.

Other functions

Switching between outside air and recirculated air modes

• Press.
• The mode switches between outside air mode (indicator off) and recirculated air mode (indicator on) each time is pressed.

Defogging the windshield

• Defoggers are used to defog the windshield and front side windows.
• Press.
• The dehumidification function operates and fan speed increases.
• Set the outside/recirculated air mode button to the outside air mode if the recirculated air mode is used. (It may switch automatically.)
• To defog the windshield and the side windows early, turn the airflow and temperature up.
• To return to the previous mode, press again when the windshield is defogged.

Defogging the rear window and outside rearview mirrors

• Vehicles without outside rear view mirror defoggers
• A defogger is used to defog the rear window.
• Press .
• The defogger will automatically turn off after a period of time.
• Vehicles with outside rear view mirror defoggers
• Defoggers are used to defog the rear window and to remove raindrops, dew and frost from the outside rearview mirrors.
• Press .
• The defoggers will automatically turn off after some time.

2023 Toyota Camry Specs, Price, Features and Mileage (Brochure)

Air outlets

Location of air outlets
The air outlets and air volume change according to the selected airflow mode.

 Adjusting the position of and opening and closing the air outlets

• Direct air flow to the left or right, up or down.
• Turn the knob to open or close the vent

Using automatic mode

• Fan speed is adjusted automatically according to the temperature setting and the ambient conditions.
• Therefore, the fan may stop for a while until warm or cool air is ready to flow immediately after is pressed.

Fogging up of the windows

• The windows will easily fog up when the humidity in the vehicle is high.
• Turning on will dehumidify the air from the outlets and defog the windshield effectively.
• If you turn off, the windows may fog up more easily.
• The windows may fog up if the recirculated air mode is used

When driving on dusty roads
Close all windows. If dust thrown up by the vehicle is still drawn into the vehicle after closing the windows, it is recommended that the air intake mode be set to outside air mode and the fan speed to any setting except off.

Outside/recirculated air mode

• Setting to the recirculated air mode temporarily is recommended to prevent dirty air from entering the vehicle interior and helping to cool the vehicle when the outside air temperature is high.
• Outside/recirculated air mode may automatically switch depending on the temperature setting or the inside temperature.

When the outside temperature exceeds 75°F (24°C) and the air conditioning system is on

• In order to reduce the air conditioning power consumption, the air conditioning system may switch to recirculated air mode automatically. This may also reduce fuel consumption.
• Vehicles without a smart key system:
• Recirculated air mode is selected as a default mode when the engine switch is turned to the “ON” position.
• Vehicles with a smart key system:
• Recirculated air mode is selected as a default mode when the engine switch is turned to IGNITION ON mode.
• It is possible to switch to outside air mode at any time by pressing.

When the outside temperature is low
The dehumidification function may not operate even when is pressed.

Operation of the air conditioning system in Eco drive mode (if equipped)

• In the Eco drive mode, the air conditioning system is controlled as shown below to prioritize fuel efficiency.
• Fan speed restricted when automatic mode is selected
• To improve air conditioning performance, perform the following operations:
• Adjust the fan speed
• Turn off Eco drive mode

Ventilation and air conditioning odors

• To let fresh air in, set the air conditioning system to the outside air mode.
• During use, various odors from inside and outside the vehicle may enter into and accumulate in the air conditioning system. This may then cause odor to be emitted from the vents.

To reduce potential odours from occurring:

•  It is recommended that the air conditioning system be set to outside air mode prior to turning the vehicle off.
•  The start timing of the blower may be delayed for a short period of time immediately after the air conditioning system is started in automatic mode.

Air conditioning system refrigerant
A label regarding the refrigerant of the air conditioning system is attached to the hood at the location shown in the illustration.

The meaning of each symbol on the label are as follows:

Customization
Some functions can be customized.

WARNING

• To prevent the windshield from fogging up
• Do not use during cool air operation in extremely humid weather.
  The difference between the temperature of the outside air and that of the windshield can cause the outer surface of the windshield to fog up, blocking your vision.

Do not place anything on the instrument panel which may cover the air outlets. Otherwise, airflow may be obstructed, preventing the windshield defoggers from defogging.

To prevent burns (vehicles with outside rear view mirror defoggers)
Do not touch the rear view mirror surfaces when the outside rearview mirror defoggers are on.

NOTICE

• To prevent battery discharge
  Do not leave the air conditioning system on longer than necessary when the engine is stopped.
• When repairing/replacing parts of the air conditioning system
  Have repair/replacement performed by your Toyota dealer.
  When a part of the air conditioning system, such as the evaporator, is to be replaced, it must be replaced with a new one.

Automatic air conditioning system (with “SYNC” button)
Air outlets and fan speed are automatically adjusted according to the temperature setting
Air conditioning controls

Adjusting the temperature setting
To adjust the temperature setting, turn clockwise to increase the temperature and counterclockwise to decrease the temperature. If is not pressed, the system will blow ambient temperature air or heated air. The air conditioning system switches between individual and synchronized modes each time is pressed.

Synchronized modes (indicator on):
The driver’s side dial can be used to adjust the temperature for the driver’s and front passenger’s side. At this time, operate the front passenger’s side dial to enter individual mode.

Individual modes (indicator off):
The temperature for the driver’s and front passenger’s side can be adjusted separately.

Fan speed setting

• To adjust the fan speed, press to increase the fan speed and to decrease the fan speed. Press to turn the fan off.
• Change the airflow mode To change the airflow mode, press.
• The air outlets used are switched each time the button is pressed.
• Air flows to the upper body.
• Air flows to the upper body and feet.
• Air flows to the feet.
• Air flows to the feet and the windshield defogger operates.

Using automatic mode

The dehumidification function begins to operate. Air outlets and fan speed are automatically adjusted according to the temperature setting. Adjust the temperature setting.
To stop the operation, press .

Automatic mode indicator
If the fan speed setting or air flow modes are operated, the automatic mode indicator goes off. However, automatic mode for functions other than that operated is maintained

Other functions
Switching between outside air and recirculated air modes Press.
The mode switches between outside air mode (indicator off) and recirculated
air mode (indicator on) each time is pressed.

Defogging the windshield
Defoggers are used to defog the windshield and front side windows.
The dehumidification function operates and fan speed increases.
Set the outside/recirculated air mode button to the outside air mode if the recirculated air mode is used. (It may switch automatically.)
To defog the windshield and the side windows early, turn the air flow and temperature up.
To return to the previous mode, press again when the windshield is defogged.

• Defogging the rear window and outside rearview mirrors
• Vehicles without outside rear view mirror defoggers

A defogger is used to defog the rear window. Press.
The defogger will automatically turn off after some time.

Vehicles with outside rear view mirror defoggers
Defoggers are used to defog the rear window and to remove raindrops, dew and frost from the outside rearview mirrors.
The defoggers will automatically turn off after some time..

Air outlets

Location of air outlets The air outlets and air volume change according to the selected airflow mode.
Adjusting the position of and opening and closing the air outlets

Direct airflow to the left or right, up or down.
Turn the knob to open or close the vent.

Using automatic mode
Fan speed is adjusted automatically according to the temperature setting and the ambient conditions.
Therefore, the fan may stop for a while until warm or cool air is ready to flow immediately after is pressed.

• Fogging up of the windows
• The windows will easily fog up when the humidity in the vehicle is high.
  Turning on will dehumidify the air from the outlets and defog the windshield effectively.
• If you turn off, the windows may fog up more easily.
• The windows may fog up if the recirculated air mode is used.
• When driving on dusty roads Close all windows. If dust thrown up by the vehicle is still drawn into the vehicle after closing the windows, it is recommended that the air intake mode be set to outside air mode and the fan speed to any setting except off.
• Outside/recirculated air mode
• Setting to the recirculated air mode temporarily is recommended to prevent dirty air from entering the vehicle interior and helping to cool the vehicle when the outside air temperature is high.
• Outside/recirculated air mode may automatically switch depending on the temperature setting or the inside temperature.
• When the outside temperature exceeds 75°F (24°C) and the air conditioning system is on
• To reduce the air conditioning power consumption, the air conditioning system may switch to recirculated air mode automatically. This may also reduce fuel consumption.
• Recirculated air mode is selected as a default mode when the engine switch is turned to IGNITION ON mode.
• It is possible to switch to outside air mode at any time by pressing.
• When the outside temperature is low The dehumidification function may not operate even when is pressed. Operation of the air conditioning system in Eco drive mode
• In the Eco drive mode, “ECO” is displayed on the air conditioning screen and the air conditioning system is controlled as shown below to prioritize fuel efficiency.
  Fan speed is restricted when automatic mode is selected
• To improve air conditioning performance, perform the following operations:
  • Adjust the fan speed
  • Turn off Eco drive mode
• Ventilation and air conditioning odors
• To let fresh air in, set the air conditioning system to the outside air mode.
• During use, various odors from inside and outside the vehicle may enter into and accumulate in the air conditioning system. This may then cause odor to be emitted from the vents.
• To reduce potential odors from occurring:
  • It is recommended that the air conditioning system be set to outside air mode prior to turning the vehicle off.
  • The start timing of the blower may be delayed for a short period immediately after the air conditioning system is started in automatic mode.
• Air conditioning filte
• Air conditioning system refrigerant
• A label regarding the refrigerant of the air conditioning system is attached to the hood at the location shown in the illustration.

Customization
Some functions can be customized

WARNING

• To prevent the windshield from fogging up
• Do not use during cool air operation in extremely humid weather.
• The difference between the temperature of the outside air and that of the windshield can cause the outer surface of the windshield to fog up, blocking your vision.
• Do not place anything on the instrument panel which may cover the air outlets.
  Otherwise, airflow may be obstructed, preventing the windshield defoggers from defogging.
• To prevent burns (vehicles with outside rear view mirror defoggers) Do not touch the rear view mirror surfaces when the outside rear view mirror defoggers are on.

 

NOTICE

• To prevent battery discharge Do not leave the air conditioning system on longer than necessary when the engine is stopped.
• When repairing/replacing parts of the air conditioning system Have repair/replacement performed by your Toyota dealer.
  When a part of the air conditioning system, such as the evaporator, is to be replaced, it must be replaced with a new one.

WARNING

• To prevent minor burn injuries Care should be taken to prevent injury if anyone in the following categories comes in contact with the steering wheel and seats when the heater is on:
• Babies, small children, the elderly, the sick and the physically challenged
• Persons with sensitive skin
• Fatigued persons
• Persons who have taken alcohol or drugs that induce sleep (sleeping drugs, cold remedies, etc.)
• To prevent damage to the seat heaters Observe the following precautions to prevent minor burns or overheating
• Do not cover the seat with a blanket or cushion when using the seat heater.
• Do not use seat heater more than necessary.

NOTICE

• Do not put heavy objects that have an uneven surface on the seat and do not stick sharp objects (needles, nails, etc.) into the seat.
• To prevent battery discharge, do not use the functions when the engine is not running.

Heated steering wheel

Turns the heated steering wheel on/off, The indicator light comes on when the heated steering wheel is operating.

Operation condition

Vehicles without a smart key system:
The heated steering wheel can be used when the engine switch is in the “ON” position.
Vehicles with a smart key system:
The heated steering wheel can be used when the engine switch is in IGNITION ON mode

Seat heaters

Without seat ventilators With seat ventilators
Each time the switch is pressed, the operation condition changes as follows.
Hi (3 segments lit) Mid (2 segments lit) Lo (1 segment lit) Off
The level indicator (amber) lights up during the operation

Operation condition

Vehicles without a smart key system:
The seat heaters can be used when the engine switch is in the “ON” position.

Vehicles with a smart key system:
The seat heaters can be used when the engine switch is in IGNITION ON mode.

Seat ventilators

Each time the switch is pressed, the operation condition changes as follows.
Hi (3 segments lit) Mid (2 segments lit) Lo (1 segment lit) Off

The level indicator (green) lights up during the operation.

• The seat ventilators can be used when The engine switch is in IGNITION ON mode.
• Air conditioning system-linked control mode When a seat ventilator is set to Hi, the fan speed of the seat ventilator may increase according to the fan speed of the air conditioning system

FAQ