2025 Toyota Tacoma Interior Features User Guide
The 2025 Toyota Tacoma’s amazing interior features will be covered in this article. Explore how Toyota has reinvented elegance and utility in the cabin of this famous truck, from cutting-edge technology to improved comfort.
2024 Toyota Tacoma Specs, Price, Features, Mileage and Review
Toyota Other interior features Guide
USB Type-C charging ports
The USB Type-C charging ports are used to supply electricity at to external devices. Use the appropriate terminal for each charging port type. The USB Type-C charging ports are for charging only. They are not designed for data transfer or other purposes. Depending on the external device, it may not charge prop-erly. Refer to the manual included with the device before using a USB Type-C charging port.
Using the USB Type-C charging ports
On the instrument panel
These USB Type-C charging ports are capable of high power output. An output up to 45 W max on a single port or 52.5 W combined (shared) is possible. The USB Type-C charging ports operate at multiple voltage and multiple wattage levels.
Rear of console box (if equipped)
The USB Type-C charging ports are used to supply 3.0 A of elec-tricity at 5 V to external devices.
Bed (if equipped)
Open the lid.
The USB Type-C charging ports can be used to supply 3.6 A of electricity at 5 V; 3.0 A of elec-tricity at 9 V; or 2.25 A of elec-tricity at 12 V to external devices.
The USB Type-C charging ports can be used when
The engine switch is in ACC or ON, or the multimedia system is on.
Bed port: The engine switch must be ON.
Situations in which the USB Type-C charging ports may not operate correctly
- Rear of console box: If a device which consumes more than 3.0 A at 5 V is connected
- If a device designed to communicate with a personal computer, such as a USB memory device, is connected
- If the connected external device is turned off (depending on device)
- If the temperature inside the vehi-cle is high, such as after the vehi-cle has been parked in the sun
About connected external devices
Depending on the connected exter-nal device, charging may occasion-ally be suspended and then start again. This is not a malfunction.
NOTICE
To prevent damage to the USB Type-C charging ports
- Do not insert foreign objects into the ports.
- Do not spill water or other liq-uids into the ports.
- Do not apply excessive force to or impact the USB Type-C charging ports.
- Do not disassemble or modify the USB Type-C charging ports.
To prevent damage to exter-nal devices
- Do not leave external devices in the vehicle. The temperature inside the vehicle may become high, resulting in damage to an external device.
- Do not push down on or apply unnecessary force to an exter-nal device or the cable of an external device while it is con-nected.
To prevent battery discharge
Do not use the USB Type-C charging ports for a long period of time with the engine stopped.
Wireless charger (if equipped)
A portable device can be charged by just placing Qi stan-dard wireless charge compatible portable devices according to the Wireless Power Consortium, such as smartphones and mobile batteries, etc., on the charge area. The compatible portable devices can be found on the following Wireless Power Consortium website. https://www. wirelesspowerconsortium.com/ This function cannot be used with portable devices that are larger than the charging tray. Also, depending on the portable device, it may not operate as normal. Please read the opera-tion manual for portable devices to be used.
The “Qi” logo
The “Qi” logo is a trademark of the Wireless Power Consortium.
Name for all parts
Vehicles with an automatic transmission
- Operation indicator light
- Charging area*
- Charging tray
- Approximately 1.0 in. (2.5 cm)
- Approximately 3.9 in. (10 cm)
Vehicles with a manual trans-mission
- Operation indicator light
- Charging area*
- Charging tray
- Approximately 1.0 in. (2.5 cm)
- Approximately 3.9 in. (10 cm)
Portable devices and wireless chargers contain charging coils. The charging coil in the wireless charger can be moved through the charging area to the location of the charging coil in the mobile device.
Charging is possible as long as the center of the coil of the mobile device is within the charging area. If 2 or more portable devices are placed on the charging tray, their charging coils may not be prop-erly detected and they may not be charged.
Using the wireless charger
Place the portable device on the charging tray. Place the charging side of the por-table device down with the center of the device in the center of the charge area. When charging, the operation indi-cator light (orange) comes on. If charging is not occurring, refer to P.478. When charging is complete, the operation indicator light (green) comes on.
Vehicles with an automatic transmission
Vehicles with a manual trans-mission
Recharging function
- When charging is complete and after a fixed time in the charge suspension state, charging restarts.
- When a portable device is moved significantly in the charge area, the charging coil is disconnected and charging is stopped momentarily. How-ever, if there is a charging coil in the charge area, the charging coil inside the wire-less charger will move toward it and then charging restarts.
Rapid charging function
- The following portable devices support rapid charging.
- Portable devices compliant with WPC Ver1.3.2 and compatible with rapid charging
- iPhone’s with an iOS version that supports 7.5 W charging (iPhone 8 and later models)
- Portable devices compatible with Galaxy original rapid charging standard.
- When a portable device that supports rapid charging is charged, charging automati-cally switches to the rapid charging function.
Lighting conditions of operation indicator light
| Operation indicator light |
Conditions |
|
| Charging tray side | Multimedia sys- tem screen side | |
| Turning off | Disappear | When the Multimedia power supply is off or engine switch is off |
|
Green (comes on) |
Gray |
On Standby (charging possible state)*1 |
| When charging is complete*2 | ||
| Orange (comes on) | Blue | Charging |
- Charging power will not be output during standby. A metallic object will not be heated, if it is placed on the charging tray in this state.
- Depending on the portable device, there are cases where the operation indicator light will continue being lit up orange even after the charging is complete.
The wireless charger is not working properly
The following are situations in which the wireless charger does not work properly and how to deal with the possible causes.
| Operation indica- tor light | Multimedia sys- tem screen | Suspected causes/Handling method |
|
Orange (Flashing repeatedly once every second) |
Gray |
Vehicle to wireless charger com- munication failure
If the engine switch is turned on, off and then restart the engine If the engine switch is in ACC, start the engine. (P.210) |
|
Green (Flashing repeatedly once every second) |
Disappear |
Wireless charger and multimedia system communication failure
If the engine switch is turned on, off and then restart the engine If the engine switch is in ACC, start the engine. (P.210) |
|
Green (comes on) |
Blue |
The smart key system is detect- ing the key
Please wait until the key detec- tion is complete. |
|
Green (comes on) |
Gray |
Foreign substance detection:
A metallic foreign substance is in the charge area, and so the abnormal heating prevention function of the metallic foreign object operated Remove the foreign substance from the charge area. |
| Portable device misaligned/dis- tanced from charging surface: The charging coil in the portable device moved outside of the charging area, or lens convex is large, or case is thick so the abnormal heating prevention function operated
Remove the portable device from the wireless charger, after 5 seconds, then place the por- table device so that it is near the center of the wireless char- ger. Also, if a case or cover is installed to the portable device, remove it. |
|
Green (comes on) |
Gray |
Battery protection function of portable device:
Before full charging, battery pro- tection function of portable device operated Confirm the setting of portable device. Continued detection of an elec- tronic key: When a Multimedia function is used through vehicle customiza- tion, the electronic key is contin- ually detected without being confirmed. In this case, turn the engine switch ACC or ON to confirm the key. |
|
Orange (Repeat- edly flashes 4 times continu- ously) |
Gray |
Safety shutdown resulting when the temperature within the wire- less charger exceeded the set value
Stop charging, remove the por- table device from the charging tray, wait for the temperature to drop, and then start charging again. |
The wireless charger can be operated when
The engine switch is in ACC or ON, or the multimedia system is on.
Portable devices that can be charged
- Portable devices compatible with the Qi wireless charging standard can be charged by the wireless charger. However, compatibility is not guaranteed for mobile devices supporting Qi Ver. 1.0 and 1.3.2 or later.
- The wireless charger is designed to supply low power electricity (5 W or less) to a cellular phone, smartphone, or other portable device.
- However, portable devices, such as the following, can be charged with more than 5 W.
- Charging at 7.5 W or less is sup-ported by iPhone’s that support 7.5 W charging.
- Charging at 10 W or less is sup-ported by Galaxy device that sup-port 10 W charging of original standard.
- Charging at 15 W or less is sup-ported by portable devices compli-ant with EPP output as defined by WPC standard Ver1.3.2.
Using the smart key system
During charging, when the smart key system searches for an elec-tronic key, charging may be tempo-rarily suspended. When the electronic key is detected, charging will automatically start again.
When covers and accessories are attached to portable devices
Do not charge in situations where cover and accessories not able to handle Qi are attached to the porta-ble device. Depending on the type of cover (including for certain genu-ine manufacturer parts) and acces-sory, it may not be possible to charge. When charging is not performed even with the portable device placed on the charge area, remove the cover and accessories.
Important points of the wire-less charger
- If the electronic key cannot be detected within the vehicle inte-rior, charging can not be done. When the door is opened and closed, charging may be tempo-rarily suspended.
- When charging, the wireless charging device and portable device will get warmer, however this is not a malfunction. When a portable device gets warm while charging may stop due to the pro-tection function on the portable device side. In this case, when the temperature of the portable drops significantly, charge again.
The fan may start operating to lower the temperature inside the wireless charger, however this is not a malfunction.
Sound generated during opera-tion
When the power supply switch is turned on or while a portable device is being identified, operation sounds may be heard. This is not a malfunction.
Cleaning the wireless charger
Trademark information
- iPhone is a trademark of Apple Inc., registered in the U.S. and other countries.
- “Galaxy” is a trademark or regis-tered trademark of Samsung Elec-tronics Co., Ltd.
Certification
WARNING
Caution while driving
When charging a portable device, for safety reasons, the driver should not operate the main part of the portable device while driv-ing.
Caution while in motion
Do not charge lightweight devices such as wireless headphones while in motion. These devices are very light and may be ejected from the charging tray, which may lead to unforeseen accidents.
Caution regarding interfer-ence with electronic devices
People with implantable cardiac pacemakers, cardiac resynchroni-zation therapy-pacemakers or implantable cardioverters, as well as any other electrical medical device, should consult their physi-cian about the usage of the wire-less charger.
WARNING
To prevent malfunctions or burns
Observe the following precau-tions. Failure to do so may result in a equipment failure and dam-age, catch fire, burns due to over-heat or electric shock.
- Do not insert any metallic objects between the charge area and the portable device while charging
- Do not attach an aluminum sticker or other metallic object to the charge area
- Do not attach an aluminum sticker or other metallic object to the side of the portable device (or to its case or cover) that touches the charge area
- Do not use the charging tray as a small storage space
- Do not subject to a strong force or impact
- Do not disassemble, modify or remove
- Do not charge devices other than specified portable devices
- Keep away from magnetic items
- Do not charge devices if the charge area is covered in dust
- Do not cover with a cloth or sim-ilar material
NOTICE
Situations in which the func-tion may not operate normally
Devices may not be charged nor-mally in the following situations.
- The portable device is fully charged
- The portable device is being charged with a cable connected
- There is foreign matter between the charge area and portable device
- Charging has caused the porta-ble device to heat up
- The temperature around the charging tray is 95°F (35°C) or higher, such as in extreme heat
- The portable device is placed with its charging side facing up
- The small portable device such as foldable type is placed in an area misaligned from the charge area
- The portable device is larger than the charging tray
- The camera lens protrudes 0.12 in. (3 mm) or more from the sur-face of the portal device
- The vehicle is in an area where strong electrical waves or noise are emitted, such as near a tele-vision tower, power plant, gaso-line station, broadcasting station, large display, airport, etc.
- Any of the following objects is stuck or installed between the charging side of the portable device and the charge area.
- Thick cases or covers
- A case or cover attached with an uneven or tilted surface, so that the charging side is not flat
- Thick decorations
- Accessories, such as finger rings, straps, etc.
NOTICE
- When there is a gap between the charging side of the portable device and the charge area due to a protrusion such as a cam-era on the charging side of the portable device.
- When the portable device is in contact with, or is covered by any of the following metallic objects:
- A flip type case with a magnet on the charging side of the por-table device
- A card that has metal on it, such as aluminum foil, etc.
- A pack of cigarettes that includes aluminum foil
- A wallet or bag that is made of metal
- Coins
- A heating pad
- CDs, DVDs or other media
- A metal accessory
- A case or cover made of metal
- Electric wave type wireless remote controls are being used nearby
- The electronic key is not inside the vehicle
- 2 or more portable devices are placed on the charging tray at the same time
If charging is abnormal or the operation indicator light contin-ues to flash for any other reason, the wireless charger may be mal-functioning. Contact your Toyota dealer.
To prevent malfunctions and data corruptions
- When charging, bringing a credit, or other magnetic card, or magnetic storage media close to the charge area may clear any stored data due to magnetic influence. Also, do not bring a wristwatch or other pre-cision instrument close to the charge area since doing so may cause it to malfunction.
- Do not charge with a non-con-tact IC card such as a transpor-tation system IC card inserted between the charging side of a portable device and the charge area. The IC chip may become extremely hot and damage the portable device or IC card. Be especially careful not to charge a portable device inside a case or cover with a non-contact IC card attached.
- Do not leave portable devices inside the vehicle. The inside of the vehicle can become hot in extreme heat, which could cause a malfunction.
If the smartphone OS has been updated
If the smartphone OS has been updated to a newer version, its charging specifications may have changed significantly. For details, check the information on the manufacturer’s website.
To prevent battery discharge
Do not use the wireless charger for a long period of time when the engine is stopped.
Assist grips (if equipped)
An assist grip installed on the pillar can be used when getting in or out of the vehicle.
NOTICE
To prevent damage to the assist grip
Do not hang any heavy object or put a heavy load on the assist grip.
Coat hooks
WARNING
Items that must not be hung on the hook
Do not hang a coat hanger or other hard or sharp object on the hook. If the SRS curtain shield air-bags deploy, these items may become projectiles that cause death or serious injury.
Power outlet (12 VDC)
The power outlet can be used for 12 V accessories that run on less than 10 A.
On the instrument panel Open the lid.
Rear of console box (if equipped)
Open the lid.
Bed (if equipped)
Open the lid.
When USB Type-C is not in use, accessories that use 12V up to 6A can be used.
The power outlet can be used when
The engine switch is in ACC or ON, or the multimedia system is on.
Bed port: The engine switch must be ON.
When turning the engine switch off
Disconnect electrical devices with charging functions, such as mobile battery packs. If such devices are left connected, the engine switch may not be turned off normally.
NOTICE
To avoid damaging the power outlet
Close the power outlet lid when the power outlet is not in use. Foreign objects or liquids that enter the power outlet may cause a short circuit.
To prevent the fuse from being blown
Do not use an accessory that uses more than 12 V 10 A.
To prevent battery discharge
Do not use the power outlet lon-ger than necessary when the engine is not running.
Power outlets (120 VAC) (if equipped)
Please use as a power supply for electronic devices that use less than 120 VAC.
Using the power outlets
Rear of the console box Open the lid.
Bed
Open the lid.
When turning the power outlets on
Press the “AC120V” switch. The power outlets can be used when the indicator on the “AC120V” switch is illuminated. The power outlets are turned off/on each time the “AC120V” switch is pressed.
Maximum available capac-ity of the power outlet
- While the vehicle is being driven
The maximum capacity of the power outlet is always 120 V AC/100 W. - When the vehicle is stationary
- The maximum capacity is restricted to 120 V AC/100 W when the shift lever is moved to any positions other than P (auto-matic transmission) or N.
- The maximum capacity is 120 V AC/400 W when the shift lever is in P (automatic transmission) or N.
The maximum capacity of 400 W can only be restored by turn-ing the power outlet main switch off and then on again under con-dition described above.
When connecting a device
Open the lid, and fully and securely insert the plug of the device into the power outlet.
Rear of the console box
Bed
When turning the power outlets off
- Turn the connected devices off.
- Press the “AC120V” switch to turn the power outlets off.
- Disconnect each plug from the power outlets.
- Close the lid of each power outlet.
The power outlet can be used when
The engine is running.
Electronic devices that can be connected to the power outlets
Use electronic devices that can be connected to the 120 VAC power outlets. Depending on the devices being used, the current flow may become high and the electric power for a moment may exceed the regu-lated capacity. If the regulated capacity is exceeded by the elec-tronic devices being used, the pro-tection function of the power outlet may operate and power outlet may not be able to be used, but this is not a malfunction. However, observe the following precautions:
- Depending on the devices used, it may cause interference with TV and radio broadcasts.
- Observe the precautions that are stated in the instruction manuals for each of the electronic devices.
- It is assumed that many typical general electronic devices will not be used within the vehicle. The following problems may occur when using electronic devices within the vehicle.
- Electronic device malfunction due to vibrations while driving.
- Electronic device malfunction or poor operations due to tempera-ture changes* within the vehicle.
- The installation is unstable and may not operate normally as the compartment within the vehicle is not flat.
Depending on the weather, season, usage environment, etc., the vehicle compartment may undergo extreme high or low tem-peratures.
Power outlet
The power outlet on the console box is a device in order to use electronic devices within the vehicle.
Devices which may not operate correctly
The following 120 VAC devices may not operate properly:
- Devices with high initial peak watt-age
- Measuring devices that process precise data
- Devices that require an extremely stable power supply
- Devices that require a constant power supply from the power out-let, such as a device with a timer.
Operating the Stop & Start sys-tem (if equipped)
When the engine restarts from the engine stopped state due to the operation of the Stop & Start sys-tem, the accessory outlet may be temporarily unavailable, however this is not a malfunction. Pressing the “AC120V” switch again will enable the accessory outlet to be used.
2024 Toyota Tacoma Specs, Price, Features, Mileage and Review
When the power supply func-tion cannot be used
If the “AC120V” switch is pressed but the switch indicator does not illu-minate, the protection circuit may have operated. In this case, perform the appropriate procedures as follows.
- Disconnect the plug of each device from the power outlets, check that the total power con-sumption of all devices to be con-nected to the power outlets, reconnect the devices and then press the “AC120V” switch again.
- Disconnect the plug of each device from the power outlets, check that the devices are not malfunctioning, reconnect the devices and then press the “AC120V” switch again.
- If the temperature inside the vehi-cle is high, such as after the vehi-cle has been parked under the sun, move the vehicle to a shaded area, use the air conditioning sys-tem to sufficiently cool the interior, and then press the “AC120V” switch again.
If the power outlets cannot be used even after performing the appropri-ate procedures above, have the vehicle inspected by your Toyota dealer.
- If any electrical device has mal-functioned, park the vehicle in a safe location and turn the
“AC120V” switch off. - If the protection function activates and power is cut, perform the fol-lowing procedure.
- Stop the vehicle in a safe place and set the parking brake.
- Ensure that the shift lever is in P (automatic transmission) or N.
- Check that the power consumed by the electrical devices is within 400 W and any device has not malfunctioned.
4 Press the “AC120V” switch. If the inside of the vehicle is hot, open the windows to lower the tem-perature and turn the switch back on once the inside of the vehicle reaches a normal temperature. If following the procedure above does not restore power, have the vehicle inspected at your Toyota dealer.
WARNING
For safe use
Observe the following precau-tions. Failure to do so may lead to an accident, resulting in death or serious injury.
- Do not use devices such as the following when driving:
- Devices which cannot be prop-erly secured within the vehicle.
- Devices which may distract the driver and be a hindrance to safe driving, such as a TV, DVD player, etc.
- Unsecured devices which gen-erate heat, such as a toaster, microwave, electric heater, elec-tric kettle, coffee maker, etc., as they may cause burns or a fire in the case of sudden braking or an accident.
- Devices which may fall under the pedals and prevent the brake pedal from being depressed.
- Do not use devices which pro-duce steam while the windows are closed. Doing so may cause the windows to fog up, reducing visibility and making it difficult to drive safely. Also, the steam may damage or negatively affect other devices. If the device must be used, stop the vehicle and open the windows before use.
- Do not use damaged electronic devices. The power supply function may not be able to be used.
- Do not disconnect the plug of a device while your hands are wet or insert a pin or other object into the power outlet. Also, if a liquid or snow is on the power outlet, dry the outlet before using it.
- Do not attempt to modify, disas-semble or repair a power outlet. For information on repairs, con-tact your Toyota dealer.
- Do not let children touch the power outlets.
- Keep the power outlets free of dust and foreign matter. Also, regularly clean the power outlet.
- If the plug of a device fits loosely in a power outlet, even though it is fully inserted, replace the power outlet. For information on replacement, contact your Toyota dealer.
Using the power outlets while parked or stopped
Observe the following precau-tions. Failure to do so may lead to an accident, possibly resulting in death or serious injury.
WARNING
- Do not leave the vehicle unat-tended while the engine is run-ning and a device is connected to a power outlet.
- Do not place luggage or get near the vicinity of the tailpipe.
- Make sure that the hood is closed. Do not put your head or hands anywhere inside the engine room, as the cooling fan may operate suddenly. If too close, hands and clothing (especially a tie, scarf, etc.) may get caught in a fan.
- Do not stop the vehicle near objects which burn easily.
- Install and use appropriately related devices to make air sup-ply and exhaust ventilation pos-sible in places where ventilation is bad, such as within garages, and places where the vehicle is surrounded (places where snow accumulates).
- Do not use in places where ven-tilation is bad, such as within garages where there are no air supply and exhaust ventilation devices, and places where the vehicle is surrounded (places where snow accumulates, etc.).
- Do not use the power outlets if the vehicle has a vehicle cover installed.
- Do not sleep in the vehicle while using devices such as an elec-tric heater.
Devices to be connected
- Read the instruction manual included with the electronic device being used and observe the precautions that are stated regarding the product.
- Do not use when the power plug or electronic device are dam-aged.
- Malfunctions or poor operations may occur when the outside temperatures are particularly high or low.
- Normal operations may not be possible for electronic devices that require level installation.
- Excluding electronic devices with waterproof specifications, do not use in places where it can be covered by rain or water, or places with lots of humidity.
- Do not use medical equipment as the power supply function may temporarily stop depending the conditions of the vehicle.
NOTICE
Observe the following precau-tions. Failure to do so may lead to the power outlets not operating cor-rectly or damage to the vehicle or a connected device.
To avoid short circuit or mal-function
- Do not set a device which gen-erates heat near the interior components or on a seat. Heat may cause these parts to melt or burn.
- Do not use devices which are sensitive to vibration or heat in the vehicle. These devices may malfunction due to vibration while driving or heat while the vehicle is parked in the sun.
NOTICE
- When not using a power outlet, make sure to close the cover. If foreign matter or a liquid enters the power outlet, it may cause a malfunction or short circuit.
- Do not use a multi-point outlet adapter as doing so may over-load the power outlet.
- Immediately stop using if there is an unusual amount of heat being felt from the power outlet.
When the ambient tempera-ture is high
If the temperature inside the vehi-cle is high, such as after the vehi-cle has been parked under the sun, move the vehicle to a shaded area, use the air conditioning sys-tem to sufficiently cool the interior, and then press the “AC120V” switch again.
Sun visors
- To set the visor in the forward position, flip it down.
- To set the visor in the side position, flip down, unhook, and swing it to the side.
- To use the side extender, place the visor in the side position, then slide it back-ward.
Vanity mirrors (if equipped)
Open the cover. The vanity light turns on.
To prevent battery discharge
If the vanity lights remain on when the engine switch is turned off, the lights will go off automatically after 20 minutes.
NOTICE
To prevent the battery from being discharged
Do not leave the vanity lights on for extended periods while the engine is off.
Grocery bag hooks (if equipped)
Grocery bag hook is designed to hang things like grocery bag.
The shape and number of shop-ping bag hooks may vary depending on the grade.
Auxiliary switches (if equipped)
When the Toyota Genuine Accessories Pre-wired Auxiliary
Switches* is connected to the vehicle, a 12V DC powered cir-cuit is available for switch opera-tion. There are three auxiliary switches that provide power to connectors in multiple locations where electrical accessories can be used. Remove the waterproof cap (if present) from vehicle wire har-ness connector to connect accessory wiring harness pigtail. The auxiliary switch will only operate in the engine switch to ON. When an aux switch is pressed, the indicator on the switch will illuminate. If the vehicle’s power usage increases and the battery volt-age becomes low, the auxiliary switch system may automati-cally turn off. The system will turn on again when the vehicle power usage is reduced and the battery voltage increases.
Accessory wire harness pigtails can be purchased at your Toyota dealer.
- AUX1
- AUX2
- AUX3
Location of auxiliary switch wire harness connectors:
- Engine compartment
- Cabin (behind trim panel)
- Engine compartment
- Rear frame
Powered Circuits:
| Circuit | Fuse Name | Fuse Size | Fuse Location | Pigtail Wire Color | Connector Location |
| AUX1 | AUX NO.1 | 15A | Engine com- partment | Black | Engine com- partment , cabin |
| AUX2 | AUX NO.2 | 10A | Green | ||
| AUX3 | AUX NO.3_LO | 5A | White | ||
| Com- mon Ground | — | — | — | Black/ White |
Non-Powered Circuits:
| Circuit | Fuse Name | Fuse Size | Fuse Location | Pigtail Wire Color | Connector Location |
| Rear AUX1 | AUX_R- R_NO.1 | 20A | Under right- rear seat | Black | Engine com- partment , rear frame |
| Rear AUX2 | AUX_R- R_NO.2 | 15A | Green | ||
| Com- mon Ground | — | — | — | Black/ White | Rear frame |
WARNING
For safe use
Do not cut or modify the wiring harness of the vehicle body when connecting accessory electronics. Failure to do so may lead to an accident resulting in property damage, serious injury, or death.
NOTICE
To prevent damage to the Auxiliary switches
- For information on repairs, con-tact your Toyota dealer.
- Accessory wiring harness pig-tails can be purchased from your Toyota dealer.
Useful Links:
2024 Toyota Tacoma Specs, Price, Features, Mileage and Review