2023 Audi E-Tron GT Instrument Cluster User Guide
This Guide covers the 2023 Audi E-Tron GT Instrument Cluster’s warning lights, indications, and display. Understanding these elements makes driving safer and more informed.
Video: 2023 Audi E-Tron GT Instrument Cluster Indicator
Instrument cluster overview
Depending on the vehicle equipment, the following items may appear in the instrument cluster: 
- Left dial
- Power meter
- High-voltage battery charge level
- Tab area.
- Central area
- Status line (one or two lines)
- Right dial
- Convenience display
- Right additional display with speedometer
- Left additional display with:
- Selector lever position
- Audi drive select mode
warning If there is a serious system malfunction, the display may turn off. The [il indicator light may also turn on. Stop the vehicle safely. See an authorized Audi dealer or authorized Audi Service Facility for assistance. Tips
- You can select the units used for temperature, speed, and other measurements in the Infotainment system.
- Speeds are displayed in mph (miles per hour) or km/h (kilometers per hour).
- Certain instrument cluster content can also be displayed in the head-up display”
Operating
- Press the
button 1 repeatedly until the desired tab is selected.
Returning to functions at higher levels
- Press the
button 5.
Opening and closing the menu
- Press the
Button 6.
Selecting and confirming a function Requirement: a menu or list must be displayed.
- To select a function, turn the left thumbwheel 7 to the desired function.
- To confirm a selection, press the left thumb wheel 7
Switching the view
- Press the VIEW button 4.
The following tabs may be available, depending on vehicle equipment: 
Adjusting the display
Switching the view
- Press the VIEW button to switch between the default view 1 and the enhanced view 2.
Adjusting the layout Depending on the vehicle equipment, various layouts may be available. Applies to: MMI: Select on the home screen: SETTINGS > Display & brightness Audi virtual cockpit.
- To adjust the desired layout, press 3.
Adjusting the additional display Depending on the vehicle equipment, the additional displays that can be selected may vary.
- Applies to: MMI: Select on the home screen:
SETTINGS > Display & brightness > Audi virtual cockpit > Configure.
- Select the desired additional display.
Reducing the display Depending on the vehicle equipment, you can hide the central area in the instrument cluster.
- Select the instrument cluster: vehicle functions tab button > Reduced display.
Power meter
The power meter( 1) gives feedback about the usage capacity of the drive system. The power meter needle displays the current usage capacity. A colored border indicates how much the drive system can currently be utilized. The colored border may vary depending on the selected driving program and the electric power currently available. Depending on the vehicle equipment, the power meter displays the following driving statuses:
- The drive system is switched off
- Vehicle recovering electrical energy
- Drive system switched
- The vehicle is being driven, drive system usage information in percentage.
Odometer
The trip odometer and odometer are displayed in the status bar. The trip odometer shows the distance driven since it was last reset. It can be used to measure short distances. The odometer shows the total distance that the vehicle has been driven. Resetting the trip odometer
- Select the instrument cluster: vehicle functions tab > button > Reset mi.
Tips Distances are displayed in mi (miles) or km (kilometers).
Outside temperature display
The outside temperature is displayed in the status bar At temperatures below 41 °F (+5 °C), a snowflake symbol appears in front of the temperature display. Warning Do not assume the roads are free of ice based on the outside temperature display. Be aware that there may be ice on roads even when the outside temperature is around 41 °F (+5 °C) and that ice can increase the risk of accidents.
Vehicle functions
Overview The trip computer is displayed in the first tab of the driver information system. Additional vehicle functions can be accessed depending on the vehicle equipment.
- Press the
button on the multifunction steering wheel.- Trip computer
- Charging
- Reduced display
- Reset trip odometer
- Lap times
- Lap statistics
- Acceleration measurement
On-board computer
Changing the display
- Turn the left thumbwheel on the multifunction steering wheel Fig. 4 until the desired display is shown.
Resetting values to zero Requirement: the Consumption, Short-term memory or Long-term memory display must be selected.
- To reset the values in one of the memories to zero, press and hold the left thumbwheel on the multifunction steering wheel for one second, or
- Select on the instrument cluster: vehicle functions tab > button Reset mi.
Displays in the trip computer The following displays may be shown, depending on the vehicle equipment:
- Time and date
- Range display
- Average consumption
- Short-term memory overview
- Long-term memory overview Driver assistance
- Traffic sign recognition and traffic light information
Short-term memory and long-term memory The short-term memory collects driving information from the time the ignition is switched on until it is switched off. If you continue driving within two hours after switching the ignition off, the new values will be included when calculating the current trip information. Unlike the short-term memory, the long-term memory is not erased automatically. You can select the time period for evaluating trip information yourself.
Average consumption The current consumption can be shown using a bar graph. The average consumption stored in the short-term memory is also displayed. If the bar is green, your vehicle is saving energy (for example, using recuperation).
Tips The date, time of day, and time and date format can be set in the Infotainment system
Useful Links
View Full PDF: 2023 Audi e-tron GT Owner’s Manual| Auto User Guide
2023 Audi e-tron S Sportback Specs, Price, Features, Mileage (Brochure)
Replacing Fuses: 2023 Audi E-Tron GT Relay and Fuse Diagrams