BYD SEAL Warning and Indicator Lights User Guide
A variety of warning and indicator lights on the dashboard of the BYD SEAL provide vital notifications and system status updates. By alerting the driver of changes in the vehicle’s condition, system issues, or operational features, these lights contribute to safe driving.
2023 BYD TANG Review, Price, Features and Mileage (Brochure)
Video: BYD SEAL Dashboard Warning Indicators
BYD Instrument Cluster Guide
LCD Instrument Cluster
- Power meter
- Time
- Regenerative braking intensity
- Gear status
- Dynamic mode
- Outside temperature
- Direction
- Speedometer
- Media (radio, music and call)
- State of charge (SOC)
- OK button
- Remaining driving range
- Total mileage (Mileage 1 and Mileage 2)
CAUTION
- For BYD SEAL, the instrument cluster is available in two themes, namely, classic and minimalist styles. Each theme has “Dark” and “Light” modes dedicated for day and nighttime respectively.
Instrument cluster view in simple mode
CAUTION
- During occasional communication delays in the instrument cluster system, the instrument cluster may automatically switch to simple mode for safe driving. In this mode, the instrument cluster continues to display driving related information normally without affecting normal vehicle travel. After the system becomes normal, the instrument cluster may automatically exit the simple mode. If it does not, try the following actions to switch back to normal mode:
- Press and hold the scroll button on auxiliary dashboard for three seconds to restart the instrument cluster information display system.
- While vehicle safety is ensured, operate the vehicle power switch to turn off the vehicle and then turn the ignition on.
- If the instrument cluster remains in simple mode after those actions have been taken, promptly contact a BYD authorized dealer or service provider for inspection.
- The image of the instrument cluster view is for reference only and is subject to actual factory configuration.
Indicators and Warning Lights
Turn signal indicator
High beam indicator
ICC indicator
AVH indicator
Normal mode indicator
ACC speed indicator
High-voltage battery low SOC warning light
Driver attention warning light*
Position light indicator
HMA indicator*
Hill descend control indicator
Light switch indicator
AEB indicator
ACC fault warning light
AEB warning light
Rear fog light indicator
Smart key warning light
ESC OFF warning light
ESC fault warning light
BSD indicator*
CPD indicator/warning light*
Motor overheating warning light
Powertrain fault warning light
EPB indicator
TSR indicator
Main alarm indicator
Headlight fault warning light
Reversing radar fault prompt
Steering system fault warning light
Motor coolant overheating indicator
Parking system fault warning light
Low-voltage power system fault warning light
High-voltage battery fault warning light
Indicators/Warning Lights Description
Smart key warning light
- If the key is not in the vehicle when you press the START/STOP button, this warning light comes on for a few seconds, a beep sounds, and the message “No key detected, please confirm if the key is in the vehicle” is displayed on the instrument cluster.
- If you press the START/STOP button while an electronic smart key matching the model is in the vehicle, this warning light does not light up. The vehicle can now be powered on.
- If the warning light flashes after you press the START/STOP button, it indicates low battery of the key.
- If the key is not in the vehicle, the instrument cluster prompts “No key detected, please confirm if the key is in the vehicle”.
ABS fault warning light
- This warning light comes on when the ignition is on. If the anti-lock braking system (ABS) is working properly, the light goes out in a few seconds. Thereafter, if the system fails, the light lights up again until the fault is cleared.
- When the ABS fault warning light is on (with the parking system fault warning light off), the braking system continues to operate whereas the ABS does not.
- When the ABS fault warning light is on (with the parking system fault warning light off), since the ABS system does not operate, the wheels will be locked in case of emergency braking or braking on a slippery road.
- If any of the following cases occurs, it means there is a fault in components monitored by the warning light system. In that case, contact a BYD authorized dealer or service provider for vehicle inspection as soon as possible.
- This warning light does not come on or is steady on when the ignition is on.
- This warning light turns on during driving.
REMINDER
- A warning light that lights up briefly during operation does not indicate a problem.
- If the ABS fault warning light is still on while the braking system warning light is on, immediately park the vehicle in a safe place. It is recommended to contact a BYD authorized dealer or service provider. In this case, if brakes are applied, the ABS will not work and the vehicle will become extremely unstable.
- If both the ABS indicator and braking system warning lights go on after the electronic parking brake (EPB) is released, it indicates that the electronic brake-force distribution (EBD) system of the front and rear tires has also failed.
Tire pressure fault warning light
- This warning light comes on when the ignition is on. It turns off in a few seconds if the tire pressure monitoring system is working properly. If the system fails, this warning light turns on again.
- When the tire pressure fault warning light comes on or flashes, the message “Please check TPMS” is displayed
on the instrument cluster, and the tire pressure is displayed as “—“, it indicates that the tire pressure system is faulty. - When the tire pressure value displays “No Signal”, it indicates that the tire pressure signal at this location may be interfered or the tire pressure monitoring module is damaged.
- When the tire pressure fault warning light flashes rapidly and one or more values turn red on the tire pressure screen on the instrument cluster, the corresponding tire is leaking rapidly.
- When the tire pressure fault warning light is solid on and one or more values turn yellow on the tire pressure screen on the instrument cluster, the corresponding tire is in under-pressure condition. When the temperature value of one or more tires turns yellow, it indicates that the tire temperature is too high.
In the event of any of the situations above, it is recommended to contact a BYD authorized dealer or service provider for inspection as soon as possible.
ESC fault warning light
- This warning light comes on when the ignition is on. If electronic stability controller (ESC) functions properly, the light goes out in a few seconds. If the system fails, this warning light turns on again until the system fault is cleared.
- If the ESC warning light flashes temporarily while the vehicle is in motion, it indicates the ESC system is working.
- When the ESC warning light turns on (with the ABS fault warning light and the parking system fault warning light off), the ESC fails, but the ABS and the braking system continue to operate normally.
- When the ESC warning light turns on (with the ABS fault warning light and the parking system fault warning light off), the ESC system does not work. This means the vehicle is extremely unstable at sharp turns or when the driver steers away from obstacles ahead.
- If any of the following cases occurs, it means there is a fault in components monitored by the warning light system. In that case, contact a BYD authorized dealer or service provider for vehicle inspection as soon as possible.
- This warning light remains off (self-check not performed) after the vehicle is powered on.
- This warning light is steady on while driving.
REMINDER
- A warning light that lights up briefly during operation does not indicate a problem.
- If the ESC warning light remains on while the warning lights for the ABS and the braking system are on, immediately stop the vehicle in a safe place and contact a BYD authorized dealer or service provider. This is because braking at this time can render the vehicle extremely unstable, and the anti-lock braking system does not work at all.
ESC OFF warning light
- When the ESC OFF switch is pressed, this warning light should remain steady on and the ESC system will not operate. When the ESC OFF switch is pressed again, this warning light should turn off and the ESC system resumes its normal operation.
REMINDER
- While the ESC OFF warning light is on, the driver must stay alert and keep driving at a lower speed when making a sharp turn and when avoiding an obstacle which appears suddenly, because ESC system is malfunctioned at this time and braking will cause instability.
Driving power limit warning light
- When the power of the vehicle is limited, this indicator will come on. In this case, contact a BYD authorized dealer or service provider in time.
Headlight fault warning light
- When the warning light is yellow, it indicates the headlight is faulty, and it is recommended to bring the vehicle to a BYD authorized dealer or service provider for inspection.
Blind spot detection (BSD) indicator
- When this indicator is on, it is recommended to bring the vehicle to a BYD authorized dealer or service provider for inspection.
Main alarm indicator
- If this indicator goes on, check the fault prompt or warning on the instrument cluster.
Driver attention warning (DAW) light
- Driver attention warning (DAW) system evaluates the driver’s degree of fatigue by the vehicle operation status. The driver would be alerted according to the evaluation results to ensure driving safety.
CPD indicator/warning light*
- CPD indicator*: If child presence detection (CPD) is turned off, the indicator is solid on, and the OFF reminder lasts for five seconds. Tap ON or Delay. The indicator turns off and CPD is enabled.
- CPD warning light*: If the CPD fault reminder lasts for five seconds and the indicator is solid on, it indicates that the CPD system fails. It is recommended to bring the vehicle to a BYD authorized dealer or service provider for inspection.
Seat belt reminder indicator
- With the ignition switched on, if any passenger on the front seats or rear seats* has not buckled up, the seat belt reminder indicator lights up. It remains on until the seat belt is fastened.
Airbag fault warning light
- With the ignition switched on, this warning light turns on and then
goes off in a few seconds if the airbag system is working properly. This warning light is used to monitor the airbag ECU, collision sensors, inflation device, warning lights, connections, and power supply. - If any of the following cases occurs, it means there is a fault in components monitored by the warning light system. In that case, contact a BYD authorized dealer or service provider for vehicle inspection as soon as possible.
- When the ignition is switched on, this warning light remains off or is solid on after the ignition is switched on.
- This warning light turns on during driving.
Parking system fault warning light
- When the brake fluid level is low and the braking system is faulty, this warning light lights up. If any of the following conditions occurs, immediately park the vehicle in a safe place. It is recommended to contact a BYD authorized dealer or service provider.
- This warning light comes on when the ignition is switched on and the brake fluid level is low.
REMINDER- When the brake fluid level is low, park the vehicle because it is dangerous to continue driving.
- This warning light comes on when the ignition is switched on and the brake fluid level is low.
- This warning light is solid on although after starting the vehicle, the brake fluid level and EPB system operation are normal (the EPB is engaged and released normally, and the message “Please check the EPB” is not displayed).
- Fault warning lights for parking brake and ABS come on simultaneously.
REMINDER- A warning light that lights up briefly during operation does not indicate a problem.
- Fault warning lights for parking brake and ABS come on simultaneously.
Steering system fault warning light
- When the steering system is faulty, this warning light is steady on. It is recommended to bring the vehicle to a BYD authorized dealer or service provider for inspection.
REMINDER- The steering system features an electric motor to reduce the force required to turn the steering wheel.
- When turning the steering wheel, a hum may be heard from the running motor.
- Do not turn the steering wheel to its limit position for more than five seconds, otherwise the temperature protection will be activated and the steering system will be damaged or steering will become heavy.
- If you have turned the steering wheel frequently with the vehicle staying put for a long time, the steering wheel may become difficult to turn even if the warning light does not turn on. This is not a fault.
- To prevent steering system overheating, the power assist effect will be reduced if the steering wheel has been frequently turned with the vehicle staying put for a long time. As a result, the steering wheel become difficult to turn. In this case, reduce steering frequency or power off the vehicle. The system will recover within 10 minutes.
WARNING
- If the steering system warning light goes on, immediately park the vehicle safely, and contact a BYD authorized dealer or service provider.
Zero position indicator light
- If the vehicle loses power due to abnormal operations such as connecting/disconnecting low-voltage batteries or fuses, when the power supply of the vehicle is restored, the zero position indicator light on the instrument cluster lights up.
- In this case, it is necessary to perform zero self-learning operation of the steering wheel angle, namely: Turn the steering wheel slowly and fully to the left and right respectively, and release it in two to five seconds. Then shut down the engine and wait for over 10 seconds. Restart the vehicle, the indicator goes off, and self-learning is complete.
Low-voltage power system fault warning light
- If this warning light turns on while driving, it indicates that there is a problem with the DC system or the low-voltage power system. Turn off devices such as the A/C, fan, and radio, and pull over the vehicle immediately if it is safe to do so. It is recommended to contact a BYD authorized dealer or service provider for rescue as soon as possible.
Powertrain fault warning light
- If the powertrain fails, this warning light turns on.
- If any of the following cases occurs, it means there is a fault in components monitored by the warning light system. In that case, contact a BYD authorized dealer or service provider for vehicle inspection as soon as possible.
- This warning light is steady on when the ignition is switched on.
- This warning light turns on during driving.
CAUTION
- Try not to drive the vehicle when the warning light is on. Contact a BYD authorized dealer or service provider to check the problem as soon as possible.
High-voltage battery overheating warning light
- If this warning light is on, it indicates that the high-voltage battery temperature is too high and the vehicle must be stopped to cool down. When the warning light flashes, it is recommended to immediately stop the vehicle safely and leave the vehicle as soon as possible.
- The high-voltage battery may overheat under the following operating conditions:
- Driving up a slope for a long time in hot weather.
- Long period of stop-and-go traffic condition, frequent rapid acceleration, frequent hard braking, or vehicle running for a long time without pause.
High-voltage battery fault warning light
- This warning light comes on when the ignition has just been switched on. If the high-voltage battery system is working properly, this warning light will turn off in a few seconds. Thereafter, if the system fails, this light will light up again. It is recommended to contact a BYD authorized dealer or service provider for inspection as soon as possible.
- If any of the following cases occurs, it means that there are faults in
the components monitored by the warning light system. In such case, it is recommended to contact a BYD authorized dealer or service provider for vehicle inspection as soon as possible. - This warning light is steady on when the ignition is on.
- This warning light is steady on or occasionally turns on while driving.
PCW warning light (red)
- When this indicator is on or flashes, pay attention to the distance from the vehicle ahead, and do not get too close to it to prevent potential collision.
Motor coolant overheating indicator
- If this indicator is solid on, it indicates that the motor coolant temperature is too high. Park the vehicle in a safe area until this indicator goes out.
TSR indicator*
- When this indicator lights up, it means that the vehicle system has recognized the speed limit value on current road section.
2023 BYD TANG Review, Price, Features and Mileage (Brochure)
Other Instrument Cluster Fault Prompts
The instrument cluster may display the following fault prompts. Handle them as recommended:
| Symbol | Error message | Response |
|
Please check the OBC system | The on-board charging system is faulty. In this case, check the charging connection, and reconnect the charging equipment. If the fault persists, contact a BYD authorized dealer or service provider. |
| Please check the data network of the vehicle. | The vehicle may be disconnected from the data network. In this case, park the vehicle immediately at a safe place, and contact a BYD authorized dealer or service provider. | |
| EV power limited | The EV function is limited. Contact a BYD authorized dealer or service provider immediately. | |
|
Please check the headlight | The headlight is faulty. In this case, contact a BYD authorized dealer or service provider. |
|
ADAS is limited* | The predictive collision warning (PCW) and automatic emergency braking (AEB) systems are faulty. In this case, park the vehicle, and contact a BYD authorized dealer or service provider. |
|
ADAS is limited* | The blind spot assist system is faulty. In this case, park the vehicle, and contact a BYD authorized dealer or service provider. |
 |
ADAS is limited* | The lane departure assist (LDA) system is faulty. In this case, park the vehicle, and contact a BYD authorized dealer or service provider. |
 |
Intelligent-camera is not available due to poor condition* | The intelligent camera is unusable. Check whether the visual field of the camera on the front windshield is blocked by foreign objects or is foggy. If not, contact a BYD authorized dealer or service provider. |
 |
Please check the gear* | The shifter controller is faulty. In this case, park the vehicle immediately, and contact a BYD authorized dealer or service provider. |
Useful Links:
2023 BYD TANG Review, Price, Features and Mileage (Brochure)
BYD SEAL Windshield Wipers and Washer User Guide
BYD SEAL Anti-Theft Alarm User Guide