
Table of Contents
Toggle2022 Cadillac CT5 Head-Up Display User Guide
In order to keep drivers’ attention on the road, the 2022 Cadillac CT5 Head-Up Display puts important driving information onto the windshield. By keeping speed, navigation, and alarms inside the driver’s field of vision, this cutting-edge technology improves convenience and safety.
Cadillac Head-Up Display (HUD) Guide
Warning
If the HUD image is too bright or too high in your field of view, it may take you more time to see things you need to see when it is dark outside. Be sure to keep the HUD image dim and placed low in your field of view.
If equipped with HUD, some information concerning the operation of the vehicle is projected onto the windshield. The information is projected through the HUD lens on the driver side of the instrument panel and focused out toward the front of the vehicle.
Caution
If you try to use the HUD image as a parking aid, you may misjudge
the distance and damage your vehicle. Do not use the HUD image as a parking aid. The HUD information can be displayed in various languages in some vehicles. The speedometer reading and other numerical values can be displayed in either English or metric units. The language selection is changed through the radio and the units of measurement is changed through the instrument cluster. See Settings and “Options” under Instrument Cluster (Base Level)
HUD Display on the Windshield
The HUD may display some of the
following vehicle information and
vehicle messages or alerts:
- Speed
- Audio
- Phone
- Navigation
- Performance
- Driver Assistance Features
- Vehicle Messages
Some vehicle messages or alerts displayed in the HUD may be cleared by using the steering wheel controls.
The HUD control is to the left of the steering wheel. To adjust the HUD image:
- Adjust the driver seat.
- Start the engine.
- Use the following settings to adjust the HUD.
Press or lift to center the HUD image. The HUD image can only be adjusted up and down, not side to side.
INFO: Press to select the display view. Each press will change the display view.
Lift and hold to brighten the display. Press and hold to dim the display. Continue to hold to turn the display off.
The HUD image will automatically dim and brighten to compensate for outside lighting. The HUD brightness control can also be adjusted as needed. The HUD image can temporarily light up depending on the angle and position of sunlight on the HUD display. This is normal. Polarized sunglasses could make the HUD image harder to see.
Head-Up Display (HUD) Rotation Option
This feature allows for adjusting the angle of the HUD image. Press the thumbwheel while Adjust Rotation is highlighted to enter Adjust Mode. Scroll to adjust the angle of the HUD display. Press the thumbwheel to confirm and save the setting. This feature may only be available in P (Park).
HUD Views
There are three views in the HUD. Track mode is available for V-Series only. Some vehicle information and vehicle messages or alerts may be displayed in any view.
Metric
English
Speed View : This displays digital speed in English or metric units,
speed limit, vehicle ahead indicator, Lane Departure Warning/Lane Keep Assist, and Adaptive Cruise Control and set speed. Some information only appears on vehicles that have these features, and when they are active.
Performance View : This displays digital speed, indicators from speed
view along with rpm reading, vehicle ahead indicator, Lane Departure Warning/Lane Keep Assist, and Adaptive Cruise Control and set speed.
Metric
English
Track View : If equipped, this displays digital speed, transmission
positions, Shift Timing Light Position, gear shift indicator, The shift timing lights at the top of the display will appear with increases in engine rpm. The rows of lights get closer together as the shift point gets closer. Shift the transmission before the lights come together in the display. Shift immediately if the lights are flashing.
Temporary Overlays
Infotainment: Audio, Phone, and Navigation are temporary overlays linked to cluster layouts.
Metric
English
Audio/Phone Overlay : This displays digital speed for Tour/ Sport, current gear for Track, indicators from speed view along with audio/phone information, vehicle ahead indicator, Lane Departure Warning/Lane Keep Assist, and Adaptive Cruise Control and set speed. The current radio station, media type, and incoming calls will be displayed. All HUD views may briefly display audio information when the driver uses the steering wheel controls to adjust the audio settings appearing in the instrument cluster. Incoming phone calls appearing in the instrument cluster, may also display in any HUD view.
Metric
English
Navigation Overlay : This displays digital speed for Tour/ Sport, current gear for Track, indicators from speed view along with Turn-by-Turn Navigation information in some vehicles, vehicle ahead indicator, Lane Departure Warning/Lane Keep Assist, and Adaptive Cruise Control and set speed. The compass heading is displayed when navigation routing is not active. Navigation Turn-by-Turn Alerts shown in the instrument cluster may also be displayed in any HUD view.
Care of the HUD
Clean the inside of the windshield to remove any dirt or film that could
reduce the sharpness or clarity of the HUD image. Clean the HUD lens with a soft cloth sprayed with glass cleaner. Wipe the lens gently, then dry it.
HUD Troubleshooting
If you cannot see the HUD image when the ignition is on, check that:
- Nothing is covering the HUD lens.
- The HUD brightness setting is not too dim or too bright.
- The HUD is adjusted to the proper height.
- Polarized sunglasses are not worn.
- The windshield and HUD lens are clean.
If the HUD image is not correct, contact your dealer. The windshield is part of the HUD system. If the windshield needs replacing.
Vehicle Messages
Messages displayed on the Driver Information Center (DIC) indicate the status of the vehicle or some action that may be needed to correct a condition. Multiple messages may appear one after another.
The messages that do not require immediate action can be acknowledged and cleared by pressing the thumbwheel. The messages that require immediate action cannot be cleared until that action is performed.
All messages should be taken seriously; clearing the message does not correct the problem. If a SERVICE message appears, see your dealer. Follow the instructions given in the messages. The system displays messages regarding the following topics:
- Service Messages
- Fluid Levels
- Vehicle Security
- Brakes
- Steering
- Ride Control Systems
- Driver Assistance Systems
- Cruise Control
- Lighting and Bulb Replacement
- Wiper/Washer Systems
- Doors and Windows
- Seat Belts
- Airbag Systems
- Engine and Transmission
- Tire Pressure
- Battery
Engine Power Messages
REDUCED ACCELERATION DRIVE WITH CARE
This message displays when the vehicle’s propulsion power is reduced.
A reduction in propulsion power can affect the vehicle’s ability to accelerate. If this message is on, but there is no observed reduction in
performance, proceed to your destination. Under certain conditions
the performance may be reduced the next time the vehicle is driven. The vehicle may be driven while this message is on, but maximum acceleration and speed may be reduced. Anytime this message stays
on, or displays repeatedly, the vehicle should be taken to your dealer for service as soon as possible. Under certain operating conditions, propulsion will be disabled. Try restarting after the ignition has been off for two minutes.
Vehicle Speed Messages
SPEED LIMITED TO XXX KM/H (MPH)
This message shows that the vehicle speed has been limited to the speed displayed. The limited speed is a protection for various propulsion and vehicle systems, such as lubrication, thermal, brakes, suspension, Teen Driver if equipped, or tires.
Useful Links:
View full PDF: Cadillac CT5 2022 User Guide | Auto User Guide
2024 Cadillac CT5 Specs, Price, Features, Mileage And Review
Replacing Fuses: 2022 Cadillac CT5 Fuses and Fuse Box Diagram