Auto User Guide

2023 FORD F-150 Engine Oil and Fluids User Guide

2023 FORD F-150 Featured image

Ford logo

2023 FORD F-150 Engine Oil and Fluids User Guide

This Guide covers 2023 Ford F-150 engine oil and fluids. Explore suggested oil types, fluid specs, and maintenance suggestions to keep your truck running smoothly and reliably for all your driving needs.

2023 – 2024 Ford F-150 Specs, Price, Features, Mileage and Review

Video: 2023 FORD F-150 Engine Oil and Fluids

https://www.youtube.com/watch?v=Mb7bCvanmro

ENGINE OIL

ENGINE OIL DIPSTICK OVERVIEW – GASOLINE, HYBRID ELECTRIC VEHICLE (HEV)

2023 FORD F-150 Engine Oil and Fluids Guide - How to Change Oil 1

  • A Minimum.
  • B Nominal.
  • C Maximum.

CHECKING THE ENGINE OIL LEVEL

  1. Make sure that your vehicle is on level ground.
  2. Check the oil level before starting the engine, or switch the engine off after warm up and wait 15 minutes for the oil to drain into the oil pan.
    Note: Checking the oil level too soon could result in an inaccurate reading.
  3. Remove the dipstick and wipe it with a clean, lint-free cloth.
  4. Reinstall the dipstick and make sure it is fully seated.
  5. Remove the dipstick again to check the oil level.
    Note: If the oil level is between the maximum and minimum marks, the oil level is acceptable. Do not add oil.
  6. If the oil level is at the minimum mark, immediately add oil.
    Reinstall the dipstick. Make sure it is fully seated.

Note: The oil consumption of new engines reaches its normal level after approximately 3,000 mi (5,000 km).

Note: Increases in oil level can occur from frequent short trips that do not allow the engine to get to operating temperature, as well as frequent idling or low speed driving for long periods of time.

Note: If oil levels are continuously noted above the maximum mark, schedule a visit to your authorized dealer.

ADDING ENGINE OIL

WARNING: Do not remove the filler cap when the engine is running.
WARNING: Do not add engine oil when the engine is hot. Failure to follow this instruction could result in personal injury.
Do not use supplemental engine oil additives because they are unnecessary and could lead to engine damage that the vehicle warranty may not cover.

  1. Clean the area surrounding the engine oil filler cap before you remove it.
  2. Remove the engine oil filler cap.
  3. Add engine oil that meets our specifications. See Capacities and Specifications .
  4. Reinstall the engine oil filler cap. Turn it clockwise until you feel a strong resistance.

Note: Do not add oil further than the maximum mark. Oil levels above the maximum mark may cause engine damage.

Note: Immediately soak up any oil spillage with an absorbent cloth.

RESETTING THE INTELLIGENT OIL LIFE MONITOR – VEHICLES WITH: 4.2 INCH SCREEN

  1. Press the Menu button on the steering wheel to enter the information display main menu.
  2. Select Truck Info.
  3. Select Oil Life.
  4. Select Reset Oil Life.
  5. Press and hold the OK button until the system reset confirmation appears.

RESETTING THE INTELLIGENT OIL LIFE MONITOR – VEHICLES WITH: 8 INCH SCREEN/12 INCH SCREEN
Depending on your cluster, there are two paths to reset the engine oil change reminder.
Path 1

  1. Press the Menu button on the steering wheel to enter the information display main menu.
  2. Select Settings.
  3. Select Vehicle Maintenance.
  4. Select Oil Life.
  5. Press and hold the OK button until the system reset confirmation appears.

Path 2

  1. Press the Menu button on the steering wheel to enter the information display main menu.
  2. Select Truck Info.
  3. Select Engine Information.
  4. Press and hold the OK button until the system reset confirmation appears.

ENGINE OIL CAPACITY AND SPECIFICATION
For filling information, please refer to the Capacities and Specifications section of your owner’s manual. See Engine Oil Capacity and Specification .

CHECKING THE COOLANT
When the engine is cold, check the concentration and level of the coolant at the intervals listed in the scheduled maintenance information. See Scheduled Maintenance .

Note: Make sure that the coolant level is between the minimum and maximum marks on the coolant reservoir.

Note: Coolant expands when it is hot. The level may extend beyond the MAX mark.
If the coolant level is at or below the minimum mark, add prediluted coolant immediately.
Maintain coolant concentration within 48% to 50%, which equates to a freeze point between -29°F (-34°C) and -35°F (-37°C). Coolant concentration should be checked using a refractometer. We do not recommend the use of hydrometers or coolant test strips for measuring coolant concentration.

Useful Links

View Full PDF: 2023 FORD F-150 Owner’s Manual | Auto User Guide

2023 FORD F-450 All Wheel Drive (AWD) User Guide

2023 – 2024 Ford F-150 Specs, Price, Features, Mileage and Review

Scroll to Top