2023 Infiniti QX60 Warning and Indicator Lights User Guide
Warning and indicator lights protect your dashboard in the 2023 Infiniti QX60. Each symbol—engine faults, braking alerts, driver-assist messages, and tire pressure warnings—is designated for quick action. Knowing their meanings helps you stay safe and perform well.
2024 INFINITI QX60 Specs, Price, Features, Mileage and Review
Video: 2023 Infiniti QX60 Dashboard Warning Indicators
CHECKING LIGHTS
With all doors closed, apply the parking brake, fasten the seat belts and place the ignition switch in the ON position without starting the engine. The following lights (if so equipped) will come on:
The following lights (if so equipped) come on briefly and then go off
Some indicators and warnings are also displayed in the vehicle information display between the speedometer and tachometer. For additional information, see “Vehicle information display–7 inch (18 cm) Type A” (P. 2-22) or “Vehicle information display—12.3 inch (31 cm) Type B”
WARNING/INDICATOR LIGHTS (red)
For additional information on warnings and indicators, see “Vehicle information display–7 inch (18 cm) Type A” or “Vehicle information display—12.3 inch (31 cm) Type B”
Brake warning light
- This light functions for both the parking brake and the foot brake systems.
- Parking brake indicator
- When the ignition switch is placed in the ON position, the light comes on when the parking brake is applied.
- Low brake fluid warning light
When the ignition switch is placed in the ON position, the light warns of a low brake fluid level. If the light comes on while the engine is running, with the parking brake not applied, - stop the vehicle and perform the following:
- Check the brake fluid level. Add brake fluid as necessary. For additional information, see “Brake fluid”
- If the brake fluid level is correct, have the warning system checked. It is recommended that you visit an INFINITI retailer for this service.
WARNING
- Your brake system may not be working properly if the warning light is on. Driving could be dangerous. If you judge it to be safe, drive carefully to the nearest service station for repairs. Otherwise, have your vehicle towed because driving it could be dangerous.
- Pressing the brake pedal with the engine stopped and/or a low brake fluid level may increase your stopping distance and braking will require greater pedal effort as well as pedal travel.
If the brake fluid level is below the MINI-MUM or MIN mark on the brake fluid reservoir, do not drive until the brake system has been checked. It is recommended that you visit an INFINITI retailer for this service.
Charge warning light
If this light comes on while the engine is running, it may indicate the charging system is not functioning properly. Turn the engine off and check the generator belt. If the belt is loose, broken, or missing or if the light remains on, have the system checked. It is recommended that you visit an INFINITI retailer for this service.
CAUTION
Do not continue driving if the generator belt is loose, broken or missing.
This light illuminates when a malfunction occurs in the electric shift control system. When the master warning light illuminates, the chime sounds and the following message is displayed in the vehicle information display: “When parked apply parking brake”.
When the ignition is placed in the OFF position, the chime sounds continuously. Ensure the parking brake is applied
Have the system checked. It is recommended that you visit an INFINITI retailer for this service.
Electronic parking brake indicator light
This light illuminates when the electronic parking brake system is operating.
When the ignition switch is placed in the ON position, the electronic parking brake indicator light illuminates. When the engine is started and the parking brake is released, the indicator light turns off.
If the parking brake is not released, the electronic parking brake indicator light remains illuminated. Ensure the electronic parking brake indicator light has turned off before driving.
If the electronic parking brake indicator light illuminates or flashes while the electronic parking brake warning light
(yellow) illuminates, it may indicate that the electronic parking brake system is not functioning properly. Have the system checked. It is recommended that you visit an INFINITI retailer for this service.
For additional information, see “Electronic parking brake (switch type)”
This light warns of low engine oil pressure. If the light flickers or comes on during normal driving, pull off the road in a safe area, stop the engine immediately and call an INFINITI retailer or other authorized repair shop.
The engine oil pressure warning light is not designed to indicate a low oil level. Use the dipstick to check the oil level. For additional information, see “Engine oil”
CAUTION
- Running the engine with the engine oil pressure warning light on could cause serious damage to the engine almost immediately. Such damage is not covered by warranty. Turn off the engine as soon as it is safe to do so.
- The engine oil pressure warning light is not designed to indicate oil level. The oil level should be checked using the dipstick. For additional information, see “Engine oil”
Master warning light
When the ignition is in the ON position, the master warning light illuminates if a warning message appears in the vehicle information display.
For additional information, see “Vehicle information display–7 inch (18 cm) Type A” or “Vehicle information display—12.3 inch (31 cm) Type B”
Seat belt warning light
- The light and chime remind you to fasten the driver and front passenger seat belts.
- The 2nd and 3rd row seats may also be equipped with a seat belt reminder.
For additional information, see “Seat belts”
When the Steering Assist is activated, it monitors the driver’s steering wheel operation. If the steering wheel is not operated or the driver takes his/her hands off the steering wheel for a period of time, the warning light illuminates. If the driver does not operate the steering wheel after the warning light has been illuminated, an audible alert sounds and the warning flashes in the vehicle information display, followed by a quick brake application to request the driver to take control of the vehicle again. If the driver remains unresponsive, the vehicle will automatically turn on the hazard lights and slow to a complete stop.
For additional information, see “Steering Assist”
Supplemental air bag warning light
When the ignition switch is placed in the ON position, the supplemental air bag warning light illuminates for about 7 seconds and then turns off. This means the system is operational.
If any of the following conditions occur, the front airbag, side air bag, curtain airbag, and pre-tensioner seat belt systems need servicing:
- The supplemental air bag warning light remains on after approximately 7 seconds.
- The supplemental air bag warning light does not come on at all.
It is recommended that you visit an INFINITI retailer for these services.
Unless checked and repaired, the supplemental restraint system (air bag system) and/or the pre tensioners may not function properly. For additional information, see “Supplemental Restraint System (SRS)”
WARNING
If the supplemental airbag warning light is on, it could mean that the front airbag, side airbag, curtain airbag, and/or pre tensioner systems will not operate in an accident. To help avoid injury to yourself or others, have your vehicle checked as soon as possible. It is recommended that you visit an INFINITI retailer for this service.
WARNING/INDICATOR LIGHTS (yellow)
For additional information on warnings and indicators, see “Vehicle information display–7 inch (18 cm) Type A” or “Vehicle information display—12.3 inch (31 cm) Type B”
Anti-lock Braking System (ABS) warning light
When the ignition switch is placed in the ON position, the ABS warning light illuminates and then turns off. This indicates the ABS is operational.
If the ABS light comes on while the engine is running, it may indicate the antilock braking system is not functioning properly. Have the system checked. It is recommended that you visit an INFINITI retailer for this service.
If an ABS malfunction occurs, the anti-lock function is turned off. The brake system then operates normally, but without anti-lock assistance. For additional information, see “Brake system” .
WARNING
- If the engine is not running or is turned off while driving, the power assist for the steering will not work. Steering will be harder to operate.
- When the electric power steering warning light illuminates with the engine running, there will be no power assist for the steering. You will still have control of the vehicle but the steering will be harder to operate. Have the power steering system checked. It is recommended that you visit an INFINITI retailer for this service.
When the ignition switch is placed in the ON position, the electric power steering warning light illuminates. After starting the engine, the electric power steering warning light turns off. This indicates that the electric power steering system is operational.
If the electric power steering warning light illuminates while the engine is running, it may indicate the power steering system is not functioning properly and may need servicing. Have the hydraulic pump electric power steering system checked. It is recommended that you visit an INFINITI retailer for this service.
When the electric power steering warning light illuminates with the engine running, there will be no power assist for the steering but you will still have control of the vehicle. At this time, greater steering effort is required to operate the steering wheel, especially in sharp turns and at low speeds.
For additional information, see “Power steering”
Electronic parking brake warning light
When the ignition switch is in the ON position, the electronic parking brake warning light illuminates and then turns off.
The electronic parking brake system warning light functions for the electronic parking brake system. If the warning light illuminates, it may indicate the electronic parking brake system is not functioning properly. Have the system checked. It is recommended that you visit an INFINITI retailer for this service.
For additional information, see “Parking brake”
Forward Emergency Braking (FEB) with Pedestrian Detection system warning light
- This light comes on when the ignition switch is placed in the ON position. It turns off after the engine is started.
- This light illuminates when the FEB with Pedestrian Detection system or the Predictive Forward Collision Warning (PFCW) system is set to OFF in the vehicle information display.
- If the light illuminates when the FEB with Pedestrian Detection system is on, it may indicate that the system is unavailable. For additional information, see “Forward Emergency
- Braking (FEB) with Pedestrian Detection system” and “Predictive Forward Collision Warning (PFCW)”
The front passenger air bag status light will be lit and the passenger front airbag will be off depending on how the front passenger seat is being used.
For additional information, see “Front passenger air bag and status light”
Low tire pressure warning light
Your vehicle is equipped with a Tire Pressure Monitoring System (TPMS) that monitors the tire pressure of all tires except the spare.
The low tire pressure warning light warns of low tire pressure or indicates that the TPMS is not functioning properly.
After the ignition switch is placed in the ON position, this light illuminates for about 1 second and turns off.
Low tire pressure warning
If the vehicle is being driven with low tire pressure, the warning light will illuminate. A “Tire Pressure Low Add Air” warning also appears in the vehicle information display.
When the low tire pressure warning light illuminates, you should stop and adjust the tire pressure of all four tires to the recommended COLD tire pressure shown on the Tire and Loading Information label located in the driver’s door opening. The low tire pressure warning light does not automatically turn off when the tire pressure is adjusted. After the tire is inflated to the recommended pressure, the vehicle must be driven at speeds above 16 mph (25 km/h) to activate the TPMS and turn off the low tire pressure warning light. Use a tire pressure gauge to check the tire pressure.
The “Tire Pressure Low Add Air” warning appears each time the ignition switch is placed in the ON position as long as the low tire pressure warning light remains illuminated.
For additional information, see “Vehicle information display–7 inch (18 cm) Type A” or “Vehicle information display—12.3 inch (31 cm) Type B “Tire Pressure Monitoring System (TPMS)”
TPMS malfunction
If the TPMS is not functioning properly, the low tire pressure warning light will flash for approximately 1 minute when the ignition switch is placed in the ON position. The light will remain on after 1 minute. Have the system checked. It is recommended that you visit an INFINITI retailer for this service. The “Tire Pressure Low — Add Air” warning does not appear if the low tire pressure warning light illuminates to indicate a TPMS malfunction.
For additional information, see “Tire Pressure Monitoring System (TPMS)” and “Tire Pressure”
WARNING
- Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should contact the electric medical equipment manufacturer for the possible influences before use.
- If the light does not illuminate with the ignition switch placed in the ON position, have the vehicle checked as soon as possible. It is recommended that you visit an INFINITI retailer for this service.
- If the light illuminates while driving, avoid sudden steering maneuvers or abrupt braking, reduce vehicle speed, pull off the road to a safe location and stop the vehicle as soon as possible. Driving with underinflated tires may permanently damage the tires and increase the likelihood of tire failure. Serious vehicle damage could occur and may lead to an accident and could result in serious personal injury or death. Check the tire pressure for all four tires. Adjust the tire pressure to the recommended COLD tire pressure show on the
- Tire and Loading Information label is located in the driver’s door opening to turn the low tire pressure warning light OFF. If the light still illuminates while driving after adjusting the tire pressure, a tire may be flat or the TPMS may be malfunctioning. If you have a flat tire, replace it with a spare tire as soon as possible. If no tire is flat and all tires are properly inflated, have the vehicle checked. It is recommended that you visit an INFINITI retailer for this service.
- When using a wheel without the TPMS such as the spare tire, the TPMS will not function and the low tire pressure warning light will flash for approximately 1 minute. The light will remain on after 1 minute. Have your tires replaced and/or TPMS system reset as soon as possible. It is recommended that you visit an INFINITI retailer for these services.
- Replacing tires with those not originally specified by INFINITI could affect the proper operation of the TPMS.
CAUTION
- The TPMS is not a substitute for the regular tire pressure check. Be sure to check the tire pressure regularly.
- If the vehicle is being driven at speeds of less than 16 mph (25 km/h), the TPMS may not operate correctly.
- Be sure to install the specified size of tires to the four wheels correctly.
Malfunction Indicator Light (MIL)
If this indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control malfunction.
The MIL may also come on steady if the vehicle runs out of fuel. Check to make sure that the vehicle has at least 3 gal (11.4 L) of fuel in the fuel tank.
After a few driving trips, the
If this indicator light comes on steady for 20 seconds and then blinks for 10 seconds when the engine is not running, it indicates that the vehicle is not ready for an emission control system inspection/maintenance test. For additional information, see “Readiness for inspection/maintenance (I/M) test”.
Operation
The MIL will come on in one of two ways:
- MIL on steady — An emission control system malfunction has been detected. Have the vehicle inspected. It is recommended that you visit an INFINITI retailer for this service. You do not need to have your vehicle towed to the retailer.
- MIL blinking — An engine misfire has been detected which may damage the emission control system. To reduce or avoid emission control system damage:
- do not drive at speeds above 45 mph (72 km/h).
- avoid hard acceleration or deceleration.
- avoid steep uphill grades.
- if possible, reduce the amount of cargo being hauled or towed.
The MIL may stop blinking and come on steady. Have the vehicle inspected. It is recommended that you visit an INFINITI retailer for this service. You do not need to have your vehicle towed to the retailer.
CAUTION
Continued vehicle operation without having the emission control system checked and repaired as necessary could lead to poor driveability, reduced fuel economy, and possible damage to the emission control system.
Master warning light
When the ignition is in the ON position, the master warning light illuminates if a warning message appears in the vehicle information display.
For additional information, see “Vehicle information display–7 inch (18 cm) Type A” or “Vehicle information display—12.3 inch (31 cm) Type B”
Rear Automatic Braking (RAB) warning light
- This light comes on when the ignition switch is placed in the ON position. It turns off after the engine is started.
- This light illuminates when the RAB system is turned off in the vehicle information display.
- If the light illuminates when the RAB system is on, it may indicate that the system is unavailable. For additional information, see “Rear Automatic Braking (RAB)”
- This indicator will blink when the VDC system is operating, thus alerting the driver to the fact that the road surface is slippery and the vehicle is nearing its traction limits.
- You may feel or hear the system working; this is normal.
- The light will blink for a few seconds after the VDC system stops limiting wheel spin.
- The indicator
light also comes on when you place the ignition switch in the ON position. The light will turn off after approximately 2 seconds if the system is operational. If the light does not come on have the system checked. It is recommended that you visit an INFINITI retailer for this service.
Vehicle Dynamic Control (VDC) OFF indicator light
This indicator light comes on when the VDC system is disabled in the vehicle information display. This indicates the VDC has been turned off.
Enable the VDC system in the vehicle information display again or restart the engine and the system will be reactivated. For additional information, see “Vehicle Dynamic Control (VDC) system”
The VDC light also comes on when the ignition switch is placed in the ON position. The light will turn off after about 2 seconds if the system is operational. If the light stays on or comes on along with the
WARNING
VDC should remain on unless freeing a vehicle from mud or snow.
While the VDC system is operating, you might feel a slight vibration or hear the system working when starting the vehicle or accelerating, but this is normal.
WARNING/INDICATOR LIGHTS (other)
For additional information on warnings and indicators, see “Vehicle information display–7 inch (18 cm) Type A” or “Vehicle information display—12.3 inch (31 cm) Type B”
Automatic brake hold indicator light (white/green)
- The automatic brake hold indicator light (white) illuminates when the automatic brake hold system is on standby.
- The automatic brake hold indicator light (green) illuminates when the automatic brake hold system is operating.
- For additional information, see “Automatic brake hold”
High Beam Assist indicator light (green)
This indicator light illuminates when the headlights come on while the headlight switch is in the AUTO position with the high beams selected. This indicates that the high beam assist is operational.
For additional information, see “Headlight and turn signal switch” .
This blue light comes on when the headlight high beams are on and goes out when the low beams are selected.
The high beam indicator light also comes on when the passing signal is activated.
Low beam indicator light (green)
This light comes on when the switch is turned to theposition. The headlights will come on; and the front side, tail, number plate, and instrument lights remain on.
The side light and headlight indicator light illuminate when the side light or headlight position is selected. For additional information, see “Headlight and turn signal switch”
Turn signal/hazard indicator lights (green)
- The appropriate light flashes when the turn signal switch is activated.
- Both lights flash when the hazard switch is turned on.
Useful Link
View Full PDF : 2023 Infiniti QX60 User Manual| Auto User Guide
2024 INFINITI QX60 Specs, Price, Features, Mileage and Review
2023 Infiniti QX60 Seats and Seat Belt User Guide