2025 Toyota Tundra Instrument Cluster User Guide
The instrument cluster of the 2025 Toyota Tundra will be covered in this tutorial, along with its features, capabilities, and ways to improve driving. Learn how to maximize its usability and troubleshoot it.
2023 – 2024 Toyota Tundra Review Specs, Price And Mileage (Brochure)
Video: 2025 Toyota Tundra Dashboard Indicators
Toyota Gauges and Meters (4.2-inch display type) Guide
The meters display various drive information.
The units used on the meter and display may differ depending on the target region.
- Tachometer
Displays the engine speed in revolutions per minute - Engine oil pressure gauge Displays the engine oil pressure
- Outside temperature
- Clock
Time displayed is linked to the multimedia system. For details, refer to “MULTIMEDIA OWNER’S MANUAL”. - Voltmeter
Displays the charge state - Speedometer
Displays the vehicle speed - Fuel gauge
Displays the quantity of fuel remaining in the tank - Odometer and trip meter
- Shift position and shift range display
Displays the selected shift position or selected shift range - Multi-information display
Presents the driver with a variety of driving-related data Displays warning messages if a malfunction occurs - Engine coolant temperature gauge
Displays the engine coolant temperature
The meters and display illumi-nate when
The engine switch is in ON.
Clock settings screen
If clock setting item is displayed when is selected on the multiinformation display, the system may be malfunctioning. Have the vehicle inspected by your Toyota dealer.
Outside temperature display
- In the following situations, the correct outside temperature may not be displayed, or the display may take longer than normal to change.
- When stopped, or driving at low speeds (less than 12 mph [20 km/h])
- When the outside temperature has changed suddenly (at the entrance/exit of a garage, tunnel, etc.)
- When “–” or “E” is displayed, the system may be malfunctioning. Take your vehicle to your Toyota dealer.
- Displays the outside temperature within the range of -40°F (-40°C) to 122°F (50°C).
- When the outside temperature is approximately 37°F (3°C) or lower, the indicator will flash for approximately 10 seconds, then stay on.
Liquid crystal display
Customization
Settings (e. g. meter display) can be changed on screen of the multiinformation display.
WARNING
The information display at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal information display. At extremely low temperatures, the information display monitor may respond slowly, and display changes may be delayed. For example, there is a lag between the driver’s shifting and the new gear number appearing on the display. This lag could cause the driver to downshift again, causing rapid and exces-sive engine braking and possibly an accident resulting in death or injury.
NOTICE
To prevent damage to the engine and its components
Do not let the indicator needle of the tachometer enter the red zone, which indicates the maxi-mum engine speed.
NOTICE
- The engine may be overheating if the engine coolant tempera-ture gauge is in the red zone (H). In this case, immediately stop the vehicle in a safe place, and check the engine after it has cooled completely.
Voltmeter
When the voltmeter indicates 19 V or higher or 9 V or lower while the engine is running, there may be a battery or charging system malfunction. Have the vehicle inspected at your Toyota dealer.
Engine oil pressure gauge
When the value of the engine oil pressure gauge drops while the engine is running, stop the vehicle in a safe place immediately and check the amount of engine oil. When the oil pressure drops even though the engine oil amount has not decreased, or if the oil pres-sure does not increase when engine oil is added, contact your Toyota dealer, as there may be a problem with the lubrication sys-tem.
Odometer and trip meter display
Display items
- Odometer
Displays the total distance the vehi-cle has been driven. - Trip meter A/Trip meter B
Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and display different distances independently. - Distance until next engine oil change
Displays the distance the vehicle can be driven until an oil change is necessary.
2023 – 2024 Toyota Tundra Review Specs, Price And Mileage (Brochure)
Changing the display
Each time the “ODO TRIP” switch is pressed, the displayed item will be changed. When the trip meter is displayed, pressing and holding the switch will reset the trip meter.
Pop-up display
In some situations the following will be temporarily displayed:
Distance until next engine oil change Displays the distance until the next engine oil change. This display will be displayed in the following situa-tions:
- When the engine switch is turned to ON.
- When a warning message indicating that oil mainte-nance should be performed soon or is required is dis-played.
Instrument panel light control
The brightness of the instrument panel lights can be adjusted. Pressing the button will adjust brightness of the instrument panel light.
The brightness of the instrument panel lights can be adjusted by pressing the button. Short press: 1 step change of brightness level.
Long press: continues change of brightness level until released.
Instrument cluster brightness adjustment
The instrument cluster brightness levels when the tail lights are on and off can be adjusted individually. However, when the surroundings are bright (daytime, etc.), turning on the tail lights will not change the instrument cluster brightness.
Useful Links:
2023 – 2024 Toyota Tundra Review Specs, Price And Mileage (Brochure)
2025 Toyota Tundra Automatic Transmission User Guide
2025 Toyota Tundra Warning Lights and Indicator User Guide