2026 Toyota Supra Interior and Exterior Features User Guide
This blog delves deeply into the 2026 Toyota Supra’s interior and exterior features. It emphasizes important features such as design, technology, comfort, and style.
Interior equipment
Vehicle features and options
This chapter describes all stan-dard, country-specific and optional features offered with the series. It also describes fea-tures and functions that are not necessarily available in your vehicle, e.g., due to the selected options or country versions. This also applies to safety-related functions and systems. When using these functions and sys-tems, the applicable laws and regulations must be observed.
Integrated Universal Remote Control
Concept
The integrated Universal Remote Control in the interior mirror can operate up to 3 func-tions of remote-controlled sys-tems such as garage door drives, barriers, or lighting sys-tems.
General information
The Integrated Universal Remote Control replaces up to 3 different hand-held transmitters. To operate the remote control, the buttons on the interior mirror must be programmed with the desired functions. The hand-held transmitter for the particular system is required in order to program the remote control.
Before selling the vehicle, delete the stored functions for the sake of security.
If possible, do not install the antenna of the remote-con-trolled system, e.g. the garage door drive, near metal objects to ensure the best possible opera-tion.
Safety information
WARNING
The operation of remote-con-trolled systems with the integrated universal remote control, such as the garage door, may result in injury, for example, body parts becoming jammed in a garage door. There is a risk of injury and risk of damage to property. Make sure that the area of movement of the respective system is clear during programming and opera-tion. Also follow the safety infor-mation of the hand-held transmitter.
Compatibility
If this symbol is printed on the packaging or in the owner’s manual of the system to be con-trolled, the system is generally compatible with the integrated Uni-versal Remote Control. Additional questions are answered by:
- Your Toyota dealer.
- www.homelink.com on the Internet.
HomeLink is a registered trade-mark of Gentex Corporation.
Control elements on the interior mirror
- Buttons, arrow
- LED, arrow
- The hand-held transmitter, arrow 3, is required for pro-gramming.
Programming
General information
The battery of the hand-held transmitter must be fully charged at the time of program-ming to ensure an optimal range of the integrated universal remote control.
- Switch on standby state.
- Initial setup: Press and hold the two outer buttons on the interior mirror simultaneously for approximately 10 seconds until the LED flashes green rapidly. This erases all pro-gramming of the buttons on the interior mirror.
- Press the interior mirror but-ton to be programmed. The LED on the interior mirror will slowly begin flashing orange.
- Hold the hand-held transmit-ter for the system to be used approx. 1 to 12 in/2.5 to 30 cm away from the buttons on the interior mirror. The required distance depends on the hand-held transmitter.
- Press and hold the button of the desired function on the hand-held transmitter.
Canada: if programming with the hand-held transmitter was inter-rupted, hold down the interior mirror button and repeatedly press and release the hand-held transmitter button for 2 seconds.
- The LED lights up green: pro-gramming completed.
Release the button.
- The LED flashes fast: pro-gramming is not complete.
Press the button on the interior mir-ror for 2 seconds and release. Per-form this procedure three times to complete the programming proce-dure.
If the integrated universal remote control remains nonoperational, continue with the special features for change code wireless systems.
- LED does not flash green after 60 seconds: program-ming not completed.
Repeat steps 3 to 6.
To program other functions on other buttons, repeat steps 3 to 5.
Special feature of the rolling code wireless system
If you are unable to operate the remote-controlled system after repeated programming, please check if the system to be con-trolled features a rolling code radio system.
Refer to the owner’s manual for the system.
For systems with a rolling code radio system, the integrated Universal Remote Control and the system also have to be syn-chronized.
Please read the owner’s manual to find out how to synchronize the system.
Synchronizing is easier with the aid of a second person.
Synchronizing the universal remote control with the system:
- Park the vehicle within range of the remote-controlled sys-tem.
- Program the relevant button on the interior mirror as described.
- Locate and press the syn- chronizing button on the sys-tem being programmed, e.g. at the garage gate. You have approx. 30 seconds for the next step.
- Hold down the programmed button on the interior mirror for approximately 3 seconds and then release it. If neces-sary, repeat this step up to three times in order to finish synchronization. Once syn-chronization is complete, the programmed function will be carried out.
Reprogramming individ-ual buttons
- Switch on standby state.
- Press and hold the interior mirror button to be pro-grammed.
- As soon as the LED on the interior mirror flashes orange after approx. 20 seconds, release the button.
- Hold the hand-held transmit-ter for the system to be used approx. 1 to 12 in/2.5 to 30 cm away from the buttons on the interior mirror. The required distance depends on the hand-held transmitter.
- Press and hold the button of the desired function on the hand-held transmitter.
Canada: if programming with the hand-held transmitter was inter-rupted, hold down the interior mirror button and repeatedly press and release the hand-held transmitter button for 2 seconds. - The LED can light up in dif-ferent ways.
- The LED lights up green: the programming procedure is completed.
Release the button.
- The LED flashes fast: the hand-held transmitter was detected but programming is not complete.
Press the button on the interior mir-ror for 2 seconds and release. Per-form this procedure three times to complete the programming proce-dure.
If the universal remote control remains nonoperational, continue with the special features for change code wireless systems.
- LED does not flash green after 60 seconds: program-ming not completed.
Repeat steps 3 to 6.
If the programming procedure is not completed, the previous pro-gramming will remain unchanged.
Useful Links:
View Full PDF: 2026 Toyota Supra Owner’s Manual | Auto User Guide
2023 Toyota Crown Review, Price, Features, Mileage (Brochure)