BYD ATTO 3 Maintenance Schedule User Guide
The BYD ATTO 3 maintenance schedule outlines routine inspections and servicing to guarantee peak vehicle performance. It helps preserve dependability and longevity over the course of the car’s life by involving regular inspections of vital components like the brakes, tires, fluid levels, and battery condition.
2023 BYD ATTO 3 Review, Price, Features and Mileage (Brochure)
BYD Maintenance Information Guide
Maintenance Cycle and Items
Maintenance Plan
- The maintenance plan is designed to ensure stable driving, failure reduction, safe and economical driving.
- The maintenance schedule lists all the maintenance items that are necessary to keep the vehicle in optimum condition at all times.
- The items in the maintenance schedule are important and need to be maintained according to the time interval.
- Hoses with any degradation or damage should be replaced immediately. Rubber hoses (for systems such as A/C, heating, and braking systems) must be checked by professional technicians according to the maintenance schedule.
Maintenance Schedule Requirements
The vehicle must be maintained according to the regular maintenance schedule.
If the vehicle is operated primarily under one or more of the following special conditions, certain maintenance items need to be performed more frequently.
- Road conditions
- Muddy, sandy, or snowy roads.
- Dusty roads
- Driving conditions
- Use of towed trailer, camping trailer, or roof rack.
- Within 8 km, repeated short distances are driven and the outside temperature is below freezing.
- Long idling and/or long distance driving at low speed, for example, using the vehicle as a police car, taxis or using it for transporting goods.
Maintenance Schedule
Vehicle maintenance is performed based on the mileages or months, whichever comes first.
| Item | Interval |
| Brake friction block and disc | Check every 24 months or 30,000 km |
| Brake piping and hoses | Check every 24 months or 30,000 km |
| Steering wheel and tie rod | Check every 24 months or 30,000 km |
| Drive shaft boot | Check every 24 months or 30,000 km |
| Ball pin and boot | Check every 24 months or 30,000 km |
| Front and rear suspensions | Check every 24 months or 30,000 km |
| Tire condition and inflation pressure, incl. TPMS | Check every 24 months or 30,000 km |
| Tire wear (Check front and rear wheel alignment when tire uneven wear is greater than 2 mm) | Check during maintenance and rotate when necessary; Under severe working conditions, check more frequently and rotate when necessary |
| EPS corrosion and foreign materials on or ablation of connectors, including wiring harness GND point | Check every 24 months or 30,000 km |
| Coolant level in expansion tank | Check every 24 months or 30,000 km |
| Brake fluid | Check every 24 months or 30,000 km |
| Bumps or deformation of the high-voltage battery tray, crash bar, shield, and explosion-proof valve*, and powertrain leaks | Check every 24 months or 30,000 km |
| A/C filter* | Check every 24 months or 30,000 km. In severe driving conditions, check every six months and replace if necessary |
| Drive motor coolant | Replace the long-acting organic acid coolant every six years or 90,000 km |
| Brake fluid | Check during maintenance and replace every 24 months or 30,000 km |
| Gear oil in the transmission | Replace the gear oil and filter at 24 months or 30,000 km for the first time, and every 24 months or 48,000 km afterwards |
| Notes: When checking Item 1, replace chassis parts in a timely manner if any abnormal damage is found. | |
CAUTION
- Brake friction pads and discs need to be checked at different intervals and more frequently in severe weather conditions, such as extremely cold regions like Norway, Finland and Iceland.
REMINDER
- To keep the high-voltage battery in optimal condition, please fully charge and discharge the vehicle regularly (at least every six months or 72,000 km, whichever comes first) for battery self-calibration. You can also contact a BYD authorized dealer or service provider for capacity testing and calibration.
Severe driving conditions refer to:
- Frequent driving in dusty areas or frequent exposure to salt-laden air.
- Frequent driving on bumpy, puddled, or mountain roads.
- Driving in cold weather.
- Frequent and sudden braking.
- Frequent use of a towed trailer.
- Use as a taxi.
- Driving in congested urban areas at temperatures above 32°C for more than 50% of total travel time.
- Driving at speeds over 120 km/h at temperatures above 30°C for more than 50% of total travel time.
- Frequent driving with full loads.
2023 BYD ATTO 3 Review, Price, Features and Mileage (Brochure)
Smart Maintenance System*
- The vehicle is equipped with a maintenance system. Tap → Service → Maintenance to set the maintenance interval and mileage.
Regular Maintenance
- Be sure to maintain the vehicle as per the maintenance schedule to allow it serve in the best working efficiency and reduce fault occurrence.
- Drivers can refer to the maintenance plan for scheduled maintenance intervals, depending on the odometer reading or time interval, whichever comes first.
- For overdue maintenance items, the same time interval should be used for maintenance.
- It is recommended that maintenance be performed in accordance with the standards and specifications of BYD Auto Co., Ltd., and by a local BYD authorized dealer or service provider.
- The maintenance schedule lists the maintenance items and travel time or distance based on the assumption that the vehicle is used as a normal means of transportation to carry passengers and goods, so do not exceed the vehicle load limit.
CAUTION
- Please maintain the vehicle regularly according to the requirements in the Warranty and Maintenance Service Manual of BYD.
Useful Links:
2023 BYD ATTO 3 Review, Price, Features and Mileage (Brochure)