BYD HAN Infotainment System User Guide
This Guide covers the BYD HAN infotainment system. Understand about its navigation, media, connectivity, and vehicle controls. This guide provides a smooth drive with smart technology, entertainment, and convenience.
2023 BYD HAN EV Review, Price, Features and Mileage (Brochure)
Video: BYD HAN Dashboard Warning Indicators
BYD Infotainment System Guide
Infotainment Touchscreen
When the ignition is switched on, the initial screen is displayed for several seconds and the infotainment system starts to work. To better experience infotainment functions, such as apps and Internet calls, the system must be used after network connection.
- Infotainment touchscreen
- Scroll button
- Scroll up to turn volume up or down to turn volume down. Volume ranges from 0 to 39. A mute icon is displayed when the volume is 0.
- With the infotainment system on, press the scroll button to mute the sound and enter the screen saver interface or turn off the screen (set the screen saver through the infotainment touchscreen→ → System → Display). Press the scroll button again to turn off the mute and turn on the screen.
- Press and hold the scroll button for three seconds to restart the infotainment system.
Reset to factory settings
- This function factory resets the infotainment system.
- During the process, do not touch any infotainment button or turn off the power supply, or errors may occur.
- The process takes two to five minutes.
WARNING
- Do not use a high-power inverter in the vehicle, as this may cause infotainment system malfunction.
- Do not format or root the device without authorization, as this may cause infotainment system or vehicle malfunction.
- In driving, please use the infotainment system in landscape mode wherever possible for your safety.
CAUTION
- To prevent damage to the touchscreen:
- Touch the screen gently. If there is no response, remove finger from the screen, then touch it again.
- Clean the screen with a soft damp cloth. Do not use any cleaning product.
- Using the touchscreen
- When the screen temperature is low, the image displayed may be darker or the system may work slightly slower than normal.
- The screen may be dark or difficult to see when you are wearing sunglasses. In that case, change the viewing angle or take off the sunglasses.
- The touchscreen buttons that are grayed out cannot be operated.
- The touchscreen interface shown here is for reference only.
- It is recommended to contact a BYD authorized dealer or service provider in the event of a failure.
Navigation Bar
： returns to the homepage.
： shows recently opened applications.
： splits screen if applications support.
： enables screen saver.
Gestures and Responses
Gestures and associated system responses are:
- Tapping: opens applications, selects functions, clicks icons on the touchscreen, or types characters.
- Dragging: touching and dragging an icon, thumbnail, or preview to the target position to change its location.
- Swiping: operational on homepage and app screens.
- Double-tapping: zooms in or out an image.
- Spreading/pinching: zooms in or out an image with two fingers.
- Swiping down from the top of the touchscreen: open the shortcut menu.
- Swiping up from the bottom of the touchscreen: open the management center.
OTA Upgrade*
- The vehicle software can be upgraded. You can go to the infotainment touchscreen → → System → Version → Software Version→ Upgrade to upgrade the vehicle system and get the latest vehicle functions.
- When a vehicle software needs
to be updated, there will be a prompt message. You can upgrade it immediately or schedule an upgrade according to your use of the vehicle.
CAUTION
- Do not move the vehicle during the OTA upgrade.
- Before the OTA upgrade, make sure the vehicle is parked in a safe area with the gear in “P”, and the mobile communication network connection is normal.
- Make sure your vehicle is fully charged before the OTA upgrade.
- Do not install any third-party devices at the OBD interface before or during the OTA upgrade.
- The vehicle cannot be charged or discharged during an upgrade. Make sure your vehicle is fully charged before the upgrade.
- During the OTA upgrade, all functions are not available
CAUTION
except the smart key/microswitch unlocking/locking, interior light switch, hazard warning light, and window switches.
- If the OTA upgrade fails, try it again. If it also fails, contact a BYD authorized dealer or service provider for handling.
BYD Assistant
BYD Assistant is an intelligent voice assistant that responds to your
voice commands, such as requesting navigation, playing music/radio/DAB*, making a phone call, and controlling in-vehicle devices.
- Waking up BYD Assistant:
- On the steering wheel, press the button.
- On the infotainment touchscreen, tap
- Say the wake-up word: “Hi, BYD.”
- Your voice commands can be recognized after system wake-up.
- Give any instructions.
- This may be “Go home” (shortcut locations set), “Play music”, “Make a call” (contacts data and Bluetooth connection required), “Set the temperature to 23°C”, or “Turn on the seat ventilation for the driver”. BYD Assistant then performs the recognized instruction.
2023 BYD HAN EV Review, Price, Features and Mileage (Brochure)
Bluetooth Call
Connection
- On Bluetooth Call screen, tap Please connect Bluetooth to establish connection.
- Tap Scan for devices to search for available device.
- Pair the available device, and make sure the paring code displayed on your phone is consistent with the code on the touchscreen.
- Set Bluetooth when connection is complete.
Bluetooth Call
Go to the dialing screen when Bluetooth is connected.Bluetooth Call
Go to the dialing screen when Bluetooth is connected.
- Tap Contacts, Call log, and Missed calls, or use dial keypad to make a call.
- Tap
screen to zoom in or out the dialing screen.
Tap to display or hide the dial keypad.
- In panoramic view screen, a small window pops up to inform driver of a call.
File Management
New folder
- Go to file management screen to create new folders. You can enter the folder name, and tap OK or Cancel to perform actions.
- Tap the top of the file management screen to change file sources.
Search
- Tap Search on the upper left corner and enter file names to search for target files.
Cut/Copy
- Touch and hold any file, select target files and operation (copy, move or delete), and then go to the edit status.
Rename
- Touch and hold any file, select Rename in dialog displayed, rename the selected file, and then tap OK.
Delete
- Touch and hold any file, select files, and then tap Delete.
Sort
- Files are sorted by name by default. You can also sort them by size, type, or time.
Attributes
- Touch and hold any file, select a file, and then tap Details to check its attributes.
Useful Links:
2023 BYD HAN EV Review, Price, Features and Mileage (Brochure)
BYD HAN Child Restraint Systems User Guide
BYD HAN Seats and Seat Belt User Guide