2023 RAM ProMaster Display Instrument Cluster | How to use

2023 RAM ProMaster Display Instrument Cluster | How to use

The 2023 RAM ProMaster‘s display instrument cluster is a cutting-edge combination of technology and usefulness that gives drivers a complete and easy-to-use interface. The instrument panel is a central location for important controls and information that is meant to make driving more enjoyable. The high-resolution panel is placed so that it is easy to see and encourages the driver to get involved. The features of the cluster are easy to use, with menus and buttons that are designed to be simple and clear so that drivers can keep their attention on the road. The instrument panel gives drivers a lot of real-time information that they can use to do things like check the vehicle’s performance and change settings. The 2023 RAM ProMaster‘s display instrument cluster stands out as a sign of the brand’s dedication to new ideas and user-centered design in a time when car technology is always changing.

2023 RAM PROMASTER Specs, Price, Features, Mileage And Review

GETTING TO KNOW YOUR INSTRUMENT PANEL

BASE / MIDLINE INSTRUMENT CLUSTER
BASE / MIDLINE INSTRUMENT CLUSTER DESCRIPTIONS
Use this QR code to access your digital experience.

1. Speedometer
   1. Indicates vehicle speed.
2. Instrument Cluster Display
   1. The instrument cluster display features a driver interactive display Ú page 52.
3. Tachometer
   1. Indicates the engine speed in revolutions per minute (RPM x 1000).
4. Fuel Gauge
   1. The gauge shows the level of fuel in the fuel tank when the ignition switch is in the ON/RUN position.
   2. The fuel pump symbol points to the side of the vehicle where the fuel door is located.
5. Temperature Gauge
   1. The temperature gauge shows the engine coolant temperature. Any reading within the normal range indicates that the engine cooling system is operating satisfactorily.
   2. The gauge pointer will likely indicate a higher temperature when driving in hot weather or up-mountain grades. It should not be allowed to exceed the upper limits of the normal operating range.

WARNING!
A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. It is recommended to call an authorized dealer for service if your vehicle overheats Ú page 213.

CAUTION!
Driving with a hot engine cooling system could damage your vehicle. If the temperature gauge reads “H” pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the “H”, turn the engine off immediately and call an authorized dealer for service.

NOTE:
The hard telltales will illuminate for a bulb check when the ignition is first cycled.

INSTRUMENT CLUSTER
INSTRUMENT CLUSTER DESCRIPTIONS

1. Tachometer
   1. This gauge measures engine revolutions per minute (RPM x 1000). Before the pointer reaches the red area, ease up on the accelerator to prevent engine damage.
2. Instrument Cluster Display
   1. When the appropriate conditions exist, this display shows instrument cluster display messages Ú page 52.
   2. Odometer/Trip Odometer Display Area
      US Federal regulations require that upon transfer of vehicle ownership, the seller certifies to the purchaser the correct mileage that the vehicle has been driven. If your odometer needs to be repaired or serviced, the repair technician should leave the odometer reading the same as it was before the repair or service. If the technician cannot do so, then the odometer must be set at zero, and a sticker must be placed in the door jamb stating what the mileage was before the repair or service. It is a good idea for you to make a record of the odometer reading before the repair/service so that you can be sure that it is properly reset, or that the door jamb sticker is accurate if the odometer must be reset at zero.
   3. Gear Selector Status (PRND)
      The gear selector status “P, R, N, D, 1, 2, 3, 4, etc.” are displayed indicating the gear selector position. Tell-tales “1, 2, 3, 4, etc.” indicate the manual mode has been engaged and the gear selected is displayed
3. Temperature Gauge
   1. The temperature gauge shows the engine coolant temperature. Any reading within the normal range indicates that the engine cooling system is operating satisfactorily.
   2. The pointer will likely indicate a higher temperature when driving in hot weather or up-mountain grades. It should not be allowed to exceed the upper limits of the normal operating range.
      WARNING!
      A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. You may want to call an authorized dealer for service if your vehicle overheats.
      CAUTION!
      Driving with a hot engine cooling system could damage your vehicle. If the temperature gauge reads “H,” pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the “H,” turn the engine off immediately and call an authorized dealer for service.
4. Fuel Gauge
   1. The pointer shows the level of fuel in the fuel tank when the ignition switch is in the ON/RUN position.
   2. 
      The fuel pump symbol points to the side of the vehicle where the fuel door is located Ú page 112.
5. Speedometer
   1. Indicates vehicle speed.

 

FAQs

Useful Link:

View Full PDF: 2023 RAM ProMaster Owner’s Manual | Auto User Guide

2023 RAM PROMASTER Specs, Price, Features, Mileage And Review