2024 FORD Expedition Wipers and Washers Guide
In the ever-changing field of automotive innovation, the 2024 Ford Expedition stands out as a technical powerhouse, particularly with its wiper and washer system. The Expedition’s wipers and washers have been meticulously refined to ensure maximum visibility and safety, exemplifying Ford’s dedication to quality. These features are designed to navigate through a variety of weather conditions with unwavering efficiency, combining cutting-edge innovation with user-centric ease. From battling severe storms to clearing debris with precision, the Expedition’s wipers and washers demonstrate Ford’s unwavering pursuit of automotive perfection, guaranteeing drivers a journey distinguished by clarity and confidence on the road ahead.
2024 Ford Expedition Specs, Price, Features, Mileage and Review
Wipers and Washers
WIPERS
WIPER PRECAUTIONS
Do not operate the wipers on a dry windshield. This could scratch the glass or damage the wiper blades. Use the windshield washers before wiping a dry windshield.
Fully defrost the windshield before you switch the windshield wipers on.
Switch the windshield wipers off before entering a car wash.
SWITCHING WINDSHIELD WIPERS ON AND OFF
- A High-speed wipe.
- B Low-speed wipe.
- C Auto Wipe/Intermittent wipe.
- D Off.
AUTO WIPERS (IF EQUIPPED)
WHAT ARE AUTO WIPERS
Auto wipers turns on and control the speed and frequency of the windshield wipers.
AUTO WIPERS SETTINGS -VEHICLES WITH: 12 INCH SCREEN
- Press Settings on the touchscreen.
- Press Vehicle Settings.
- Press Wipers.
- Switch Rain Sensing on or off.
Note: When you switch the feature off, the wipers do not operate based on the rain sensor. When you switch on the windshield wipers to the intermittent wipe position with the feature off, the wipers use the wipe speed set by the rotary control.
AUTO WIPERS SETTINGS -VEHICLES WITH: 15 INCH SCREEN
- From the settings menu, press Vehicle. See Center Display
- Press Wipers.
- Switch Rain sensing on or off.
Note: When you switch the feature off, the wipers do not operate based on the rain sensor. When you switch on the windshield wipers to the intermittent wipe position with the feature off, the wipers use the wipe speed set by the rotary control.
ADJUSTING THE SENSITIVITY OF THE RAIN SENSOR
- A Low sensitivity.
- B High sensitivity.
Use the rotary control to set the rain sensor sensitivity.
Note: Use intermittent wipe positions to adjust the rain sensor sensitivity.
When you select low sensitivity, the wipers operate when the sensor detects a large amount of water on the windshield.
When you select high sensitivity, the wipers operate when the sensor detects a small amount of water on the windshield.
SWITCHING THE REAR
WINDOW WIPER ON AND OFF
Rotate the control away from you for a long wipe interval.
Rotate the control toward you for a short wipe interval.
REVERSE WIPE
WHAT IS REVERSE WIPE
Reverse wipe turns on the rear window wiper when you shift into reverse (R) and the windshield wipers are on.
REVERSE WIPE SETTINGS -VEHICLES WITH: 12 INCH SCREEN
- Press Settings on the touchscreen.
- Press Vehicle Settings.
- Press Wipers.
- Switch Rear Wiper On (when in Reverse) on or off.
REVERSE WIPE SETTINGS -VEHICLES WITH: 15 INCH SCREEN
Press the button on the touchscreen.- Press Vehicle.
- Press Wipers.
- Switch Reverse Wiper on or off.
CHECKING THE WIPER BLADES
Run the tip of your fingers over the edge of the blade to check for roughness.
REPLACING THE FRONT WIPER BLADES
- Pull the wiper blade and arm away from the glass.
Note:Do not hold the wiper blade to lift the
wiper arm.
- Lift the wiper blade primary locking clip.
- Press the wiper blade secondary locking clip.
- Remove the wiper blade.
Note: Make sure that the wiper arm does not spring back against the glass when the wiper blade is not attached. - To install, reverse the removal procedure.
Note: Make sure that the wiper blade locks into place.
REPLACING THE REAR WIPER BLADES
- Lift the wiper arm.
Note:Do not hold the wiper blade to lift the
wiper arm. - Remove the wiper blade.
Note: Make sure that the wiper arm does not spring back against the glass when the wiper blade is not attached. - To install, reverse the removal procedure.
Note: Make sure that the wiper blade locks into place.
WARNING: If you operate your vehicle in temperatures below 41°F
(5°C), use washer fluid with antifreeze protection. Failure to use washer fluid with antifreeze protection in cold weather could result in impaired windshield vision and increase the risk of injury or accident.
Do not operate the washers when the washer reservoir is empty. This could cause the washer pump to overheat.
Keep the outside of the windshield clean. The rain sensor is very sensitive and the wipers may operate if dirt, mist or insects hit the windshield.
USING THE WINDSHIELD WASHER
Press and hold the button at the end of the lever to operate the windshield washer.
Note: A courtesy wipe occurs a short time after the wipers stop to clear any remaining washer fluid when switched on.
SWITCHING THE COURTESY WIPE ON AND OFF – VEHICLES WITH: 12 INCH SCREEN
- Press Settings on the touchscreen.
- Press Vehicle Settings.
- Press Wipers.
- Switch Courtesy Wipe on or off.
SWITCHING THE COURTESY WIPE ON AND OFF – VEHICLES WITH: 15 INCH SCREEN
- From the settings menu, press Vehicle. See Center Display
- Press Wipers.
- Switch Courtesy Wipe on or off.
Note: When you switch the feature on, the wipers make an additional single wipe at the end of the washer request. When you switch it off, the wipers finish the current washer request.
USING THE REAR WINDOW WASHER
Rotate the control to the top or bottom position and hold it to operate the rear window washer.
Note: A courtesy wipe occurs a short time after the wipers stop to clear any remaining washer fluid when switched on. See Switching the Courtesy Wipe On and Off.
ADDING WASHER FLUID
WASHER FLUID SPECIFICATION
See Washer Fluid Specification
WIPERS AND WASHERS VIDEOS
Improving Your Windshield Wiper
Performance Video Link
Courtesy Wipe Video Link
WIPERS AND WASHERS – TROUBLESHOOTING
WIPERS AND WASHERS – WARNING LAMPSIlluminates when the windshield washer fluid is low.
WIPERS AND WASHERS –FREQUENTLY ASKED QUESTIONS
Why are there streaks and smears on the windshield?
- The wiper blades could be dirty, worn or damaged. Check the wiper blades.. If the wiper blades are dirty, clean them with washer fluid or water applied with a soft sponge or cloth. If the wiper blades are worn or damaged, install new ones.
FAQs
The 2024 Ford Expedition has updated wipers and washers that provide better performance and durability for maximum vision in a variety of driving conditions.
The 2024 Ford Expedition features a clever sensor technology that automatically adjusts wiper speed and frequency based on rainfall intensity, ensuring clear sight at all times.
Drivers can manually regulate the wiper speed and activate the washers as needed, giving them more control over the cleaning procedure.
Yes, Ford designed the wipers on the 2024 Expedition to function silently and smoothly, reducing distractions and providing a more comfortable driving experience.
The 2024 Ford Expedition has a high-pressure washer system that effectively removes dirt, filth and particles from the windscreen, giving the driver a crystal-clear view.
Yes, the washer fluid reservoir in the 2024 Ford Expedition is ideally positioned and easily accessible, allowing for quick and simple refills.
Drivers can modify the placements of the washer nozzles on the 2024 Ford Expedition to ensure precise and complete windscreen cleaning.
The 2024 Ford Expedition includes a wiper de-icer function that instantly heats the wiper blades to minimise ice and snow buildup, ensuring peak performance in cold weather.
Yes, Ford designed the wipers on the 2024 Expedition with strong materials to resist extended use and extreme environmental conditions, providing long-term dependability.
Yes, the 2024 Ford Expedition has wipers that can be quickly folded away for windscreen maintenance or for parking in tight spots.
To ensure optimal system efficiency and longevity in the 2024 Ford Expedition, wiper blades and washer nozzles should be inspected and cleaned on a regular basis.
The Rain Sensing Wipers feature in the 2024 Ford Expedition allows drivers to experience hands-free operation by automatically activating the wipers when rain is detected, adding convenience and safety.
Yes, drivers can tailor the wiper settings in the 2024 Ford Expedition to their preferences, including modifying sensitivity levels and interval times for best performance.
While it is normally recommended to use manufacturer-approved washer fluid, the 2024 Ford Expedition’s washer system can be used with various additives to improve cleaning effectiveness, as long as they are compatible with the vehicle’s components.
The innovative wiper and washer system in the 2024 Ford Expedition is critical to preserving clear visibility, lowering the danger of accidents, and improving overall vehicle safety for both drivers and passengers.
Useful Links
View Full PDF: 2024 FORD Expedition Owner’s Manual|Auto User Guide
2024 Ford Expedition Specs, Price, Features, Mileage and Review