2025 Genesis GV70 Cluster Display User Manual
This Guide covers the 2025 Genesis GV70 Cluster Display’s revolutionary features, customization possibilities, and driving enhancements. Explore critical details to optimize your car’s digital dashboard.
2024 GENESIS GV70 Specs, Price, Features, Mileage and Review
Video: 2025 Genesis GV70 Cluster Dispaly and Warning Lights
CLUSTER DISPLAY
Cluster Display Control
The cluster display modes can be changed by using the control switches.
| Switch | Operation | Function |
|
Press | MODE button for changing View modes |
 |
Press | UP, DOWN switch for changing items in Utility view and Option menu |
| OK | Press | SELECT/RESET switch for entering Option menu |
| Press and hold | SELECT/RESET switch for retrieving assist information or resetting the selected item |
View Modes
| View modes | Explanation |
| Driving Assist | Driving Assist view displays the status of the vehicle’s Driver Assistance systems. |
| Turn by Turn | Turn By Turn view displays the state of the navigation. |
| Utility | Utility view displays driving information such as the trip distance, electric energy economy and etc. |
The information provided may differ depending on which features are available to your vehicle.
Driving Assist view
The status of Smart Cruise Control, Lane Following Assist, Highway Driving Assist, etc., is displayed when Driving Assist view is selected.
For more information, refer to each function information section in chapter 7.
Turn By Turn (TBT) view
Turn-by-turn navigation, distance/time to destination information is displayed when Turn by Turn view is selected.
Utility view
In the Utility view, using the ,
(UP, DOWN) switch, you may change through items in the following order.
Drive info
This display shows the trip distance, the average energy consumption, and the total driving time.
The information is combined for each ignition cycle.
To manually reset the information, press and hold the OK button when viewing the Drive Info. The trip distance, the average energy consumption, and total driving time will reset simultaneously.
The driving information will continue to be counted while the vehicle is on ( READY indicator is on) (for example, when the vehicle is in traffic or stopped at a stop light.).
Information
The vehicle must be driven for a minimum of 0.19 miles (300 meters) since the last ignition key cycle before the accumulated driving information is recalculated.
After Recharging
Trip distance, total driving time and average energy consumption after the vehicle has been recharged are displayed. To reset manually, press the OK button on the steering wheel for more than 1 second when ‘After recharging’ is displayed.
Accumulated info
This display shows the accumulated trip distance, the average energy consumption, and the total driving time.
The information is accumulated starting from the last reset.
To manually reset the information, press and hold the OK button when viewing the Accumulated driving info. The trip distance, the average energy consumption, and total driving time will reset simultaneously.
The accumulated driving information will continue to be counted while the vehicle is on (READY indicator is on) (for example, when the vehicle is in traffic or stopped at a stop light).
Information
The vehicle must be driven for a minimum of 0.19 miles (300 meters) since the last ignition key cycle before the accumulated driving information is recalculated.
Tire pressure
The tire pressure of each tire is displayed.
For more information, refer to the “Tire Pressure Monitoring System (TPMS)” section in chapter 8.
Energy flow / Driving force distribution
- The electric vehicle system informs the drivers its energy flow in various operating modes.
- The distribution status of the driving power of the front and rear wheels are displayed when Auto AWD mode is activated.
For more information, refer to the “All Wheel Drive (AWD)” section in chapter 6.
Select contents
You can select the items to be displayed in Utility view.
- Press and hold the OK button on the steering wheel.
- Use the (UP, DOWN) switch to change items, and press the OK button to select or deselect the item.
- After selecting the items to be displayed in the Utility view, press the (MODE) button to exit the ‘Select Contents’ display.
Additional information display
Driving assist information
The current operation conditions of Manual Speed Limit Assist, Smart Cruise Control, Lane Following Assist, Highway Driving Assist, etc., is displayed.
Option Menu
Press the OK button to enter Option menu.
WARNING
To avoid driver distractions, do not adjust the setting while driving which may lead to an accident.
Information
The information provided may differ depending on which functions are available to your vehicle.
| Menu | Explanation |
| Service messages | To check vehicle warning messages. |
| 3D cluster (for 12.3-inch 3D cluster) | To activate or deactivate 3D effect. |
| Head-up display | To activate or deactivate head-up display. |
| Driver Assistance settings | To directly display the “Driver Assistance” menu on the infotainment system. |
| Speed unit | To set speed unit between MPH and km/h. |
Service messages
When Service Messages menu is selected, press the OK button on the steering wheel to check vehicle warning messages.
3D cluster (for 12.3-inch 3D cluster)
When 3D Cluster menu is selected, press the OK button on the steering wheel. You may select or deselect 3D cluster effect by pressing the OK button.
Head-up display
When Head-Up Display menu is selected, press the OK button on the steering wheel. You may select or deselect head-up display by pressing the OK button.
Driver Assistance settings
When Driver Assistance Settings menu is selected, press the OK button on the steering wheel. The ‘Driver Assistance’ menu will be displayed on the infotainment system.
Speed unit
When the Speed Unit menu is selected, press the OK button on the steering wheel. You can change the speed unit setting between MPH and km/h for the cluster.
3D Instrument Cluster (for 12.3- inch 3D Cluster)
3D cluster setting
To use the 3D cluster, press the Start/Stop button to the ON position, and then select Setup > Vehicle > Cluster > 3D Cluster Depth > Medium/Light in the infotainment system.
To use the cluster 2D, select Off.
Information
The infotainment system may change after software updates. For more information, refer to the user’s manual provided in the infotainment system and the quick reference guide.
Recommendations to optimize the 3D effect
- Adjust the height of the seat and steering wheel so that the instrument cluster and camera module can be seen at a glance.
- The optimal distance to maximize the 3D effect is 30 inches (75 cm). Adjust the distance between the driver’s seat and the instrument cluster.
- Hold the steering wheel with both hands and drive in an upright position.
Information
- When your face gets too close or far to the instrument cluster, or the camera on the instrument cluster is blocked by the steering wheel or other objects, the 3D cluster changes to 2D automatically. However if the object blocking the camera is removed,
the cluster changes back to 3D automatically. - If the outside temperature is below 39 °F (4 °C), it may change to 2D for about 1 to 10 minutes.
- Two red lights may appear on the camera in the following conditions when:
- The outside brightness is dim or driving at night
- The vehicle drives inside a building, such as a basement parking lot
- The camera case of the instrument cluster is partially damaged
CAUTION
- It may sometimes be difficult to read information on the 3D cluster in the following situations. You must change the cluster to 2D for safe driving when:
- The driver is wearing sunglasses, special glasses, infrared cutoff glasses, refracting glasses or thick glasses
- The driver has heavy eye makeup (eyeliner, mascara, color makeup, false eyelash) or eye piercing
- The driver’s view is blocked by his/her hair, etc.
- The driver is winking or wearing an eye patch on one eye
- The driver’s face is covered partially by a mask, muffler, hood, etc.
- The driver’s view is blocked by incoming light from outside of the vehicle
- Light from outside, sunlight or infrared LED light of the camera is reflected on the glasses or sunglasses
- The driver turns or lowers his/her head so that the face or an eye is hidden from the camera
- The driver shakes his/her head up and down, or adverse road conditions cause excessive vehicle vibrations while driving
- The driver is too tall or short
- More than two people are looking at the instrument cluster simultaneously from the driver’s seat
- The driver’s eyesight of both eyes are severely different
- The driver has a severe headache
- Do not look toward the camera within 8 inches (20 cm) for longer than a minute.
- If you use the 3D cluster while your vehicle is stopped, it can cause eye strains or dizziness.
- We recommend people who are pregnant, elderly or has motion sickness, avoid using the cluster in 3D.
WARNING
- You should not use the 3D cluster if you or any of your family members or relatives has a history of epilepsy, convulsions, etc. Flashing or flickering lights or specific or regular patterns shown on the cluster may stimulate epilepsy, convulsions, etc.
- You should not use the 3D effect immediately if you feel any of the following symptoms: Haziness, unconsciousness, disorientation, nausea, headache, fatigue, dizziness, etc.
WARNING
While replacing the instrument cluster by yourself, be cautious of the heat from the top and backside of the instrument cluster.
NOTICE
[A]: Interior view camera
- Do not apply any impact on the surface of the instrument cluster, interior view camera or around the area of the interior view camera. If the interior view camera is damaged, the system may not operate properly.
- Do not place a mobile phone
or an object in front of the interior view camera. The surface of the instrument cluster or interior view camera might be damaged due to an impact while driving. - Do not place anything on the interior view camera or in front of interior view camera while driving. Interior view camera may not operate properly.
- When cleaning the instrument cluster or interior view camera, wipe with a soft and clean cloth to prevent damages on the surface of the cluster or interior view camera lens. In addition, you should not use sharp tools near the cluster or interior view camera, or use chemicals to clean the cluster or interior view camera.
- Always keep the interior view camera clean and dry.
Useful Links:
2024 GENESIS GV70 Specs, Price, Features, Mileage and Review
2025 Genesis GV70 Warning Lights and Indicator User Guide