2026 Hyundai Palisade Specifications User Guide
This guide delves into the 2026 Hyundai Palisade characteristics, including performance and design. Understand the advanced features, engine capabilities, and technological highlights.
Vehicle Specifications
Dimensions
| Overall length | 199.2 (5,060)/199.4 (5,065)*1/200.4 (5,090)*2 | ||
| Overall width | 77.95 (1,980) | ||
|
Overall height |
Without Roof rack | 69.49 (1,765)/70.47 (1,790)*2 | |
| With Roof rack | 71.06 (1,805)/70.05 (1,830)*2 | ||
|
Tread |
Front |
235/65 R18 | 67.72 (1,720.2) |
| 255/50 R20 | 67.29 (1,709.2) | ||
| 265/45 R21 | 67.37 (1,711.3) | ||
| 255/60 R18*2 | 67.45 (1,713.2) | ||
|
Rear |
235/65 R18 | 68.17 (1,731.5) | |
| 255/50 R20 | 67.74 (1,720.5) | ||
| 265/45 R21 | 67.82 (1,722.6) | ||
| 255/60 R18*2 | 68.17 (1,731.4) | ||
| Wheelbase | 116.93 (2,970) | ||
- For Calligraphy
- For XRT Pro
Engine
| Engine | Displacement cu. in (cc) | Bore x Stroke in. (mm) | Firing order | No. of cylinders |
|
Smartstream G3.5 GDi |
211.75
(3,470) |
3.62 x 3.43
(92 x 87) |
1-2-3-4-5-6 |
6 |
Tires and Wheels
| Inflation pressure psi (kPa) |
Wheel nut torque lbf·ft (kgf·m, N·m)
79-94 (11-13, 107-127) |
||||||
| Front | Rear | Front | Rear | ||||
|
Full size tire |
235/65 R18 | 8.0J X 18 | 36 (250) | ||||
| 255/50 R20 | 8.0J X 20 | ||||||
| 265/45 R21 | 8.5J X 21 | ||||||
| 255/60 R18 *1 | 7.5J X 18 | 35 (240) | |||||
| Spare tire | T155/90R18 | 4.0BX18 | 60 (420) | ||||
- For XRT Pro
CAUTION
When replacing tires, ALWAYS use the same size, type, brand, construction, and tread pattern supplied with the vehicle. If not, it can damage the related parts or make it work irregularly.
NOTICE
- It is permissible to add 3 psi (20 kPa) to the standard tire pressure specification if colder temperatures are expected soon. Tires typically lose 1 psi (7 kPa) for every 12 °F (7 °C) temperature drop. If extreme temperature variations are expected, recheck your tire pressure as necessary to keep them properly inflated.
- Tire inflation pressures may vary depending on changes in elevation. If driving in areas of higher or lower elevation, be sure to check and adjust for proper tire inflation.
- Do not exceed the maximum inflation pressure, as found on the sidewall of the tire(s).
Air Conditioning System
| Refrigerant 37.92±0.88 oz. ( 1,075±25 g) | R-1234yf |
|
Compressor 6.70±0.35 oz. (190±10 g) lubricant |
PAG |
Contact an authorized HYUNDAI dealer for more details.
Light Source
| Light source | Source type | Specification | ||
|
Front |
Headlight |
High | LED | LED |
| Low | LED | LED | ||
| Daytime Running Light (DRL) | LED | LED | ||
| Parking light | LED | LED | ||
| Turn signal light | LED | LED | ||
| Side marker | LED | LED | ||
| Side repeater light (Side mirror) (if equipped) | LED | LED | ||
|
Rear |
Tail/Stop light | LED | LED | |
| Turn signal light | LED | LED | ||
| Reverse light | LED | LED | ||
| Side marker | LED | LED | ||
| License plate light | LED | LED | ||
| High mounted stop light | LED | LED | ||
|
Interior |
Map lamp | LED | LED | |
| Rear personal lamp (if equipped) | LED | LED | ||
| Rear room lamp (if equipped) | LED | LED | ||
| Glove box lamp | LED | LED | ||
| Vanity mirror lamp | LED | LED | ||
| Mood lamp | LED | LED | ||
| Cargo area lamp | LED | LED | ||
Recommended Lubricants and Capacities
To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality. The correct lubricants also help promote the engine efficiency that results in improved fuel economy.
These lubricants and fluids are recommended for use in your vehicle.
| Lubricant | Volume | Classification |
 Engine oil *1*2 (drain and refill) Recommends
|
6.13 US qt. (5.8 ℓ) |
SAE 0W-20 API SN PLUS/SP or ILSAC GF-6*3 |
|
Automatic transmission fluid |
7.39 US qt. (7.0 ℓ) |
SK ATF SP4M-1, MICHANG ATF SP4M-1, S-OIL ATF
SP4M-1 or other brands meeting the above specification approved by HYUNDAI Motor Co. |
|
Coolant |
12.44 US qt. (11.77 ℓ) |
MIXTURE, Antifreeze with water (Ethylene glycol base coolant for aluminum radiator) |
| Brake fluid *4 | As required | DOT-4 |
| Rear differential oil (4WD) *5 | 0.67 US qt. (0.65 ℓ) |
HYPOID GEAR OIL API GL-5, SAE 75W/85 (SK HCT-5 GEAR OIL 75W/85 or EQUIVALENT) |
| Transfer case oil (4WD) *5 | 0.74 US qt. (0.7 ℓ) | |
|
Electronic Limited Differential (e-LSD) oil |
(0.507 ± 0.015
US qt.) 480 ± 15 mℓ |
SHELL TF0870C or equivalent |
|
Fuel |
19 US gal. (72ℓ) | Refer to the Fuel Requirements. |
- Refer to the Recommended SAE viscosity number.
- Engine oils labeled Energy Conserving Oil are now available. Along with other additional benefits, they contribute to fuel economy by reducing the amount of fuel necessary to overcome engine friction. Often, these improvements are difficult to measure in everyday driving, but in a year’s time, they can offer significant cost and energy savings.
- Requires <API SN PLUS (or above) Full synthetic> grade engine oil. If a lower grade engine oil (mineral oil including Semi-synthetic) is used, then the engine oil and engine oil filter must be replaced as indicated severe maintenance condition.
- To maintain the best braking performance and ABS/ESC performance, use genuine brake fluid that conform to specifications. (SAE J1704 DOT-4 LV, FMVSS 116 DOT-4, ISO4925 CLASS-6)
- If the transfer case/rear differential is submerged, visit an authorized HYUNDAI genuine products to replace the differential oil.
NOTICE
Severe engine and transmission damage may result from the use of poor quality fuels and lubricants that do not meet HYUNDAI specifications. Always use high quality fuels and lubricants that meet the specifications listed in the recommended table.
Recommended SAE viscosity number
Engine oil viscosity (thickness) has an effect on fuel economy and cold weather operating (engine start and engine oil flowability). Lower viscosity engine oils can provide better fuel economy and cold weather performance, however, higher viscosity engine oils are required for satisfactory lubrication in hot weather. Using oils of any viscosity other than those recommended may result in engine damage.
When choosing an oil, consider the range of temperature your vehicle is operated in before the next oil change.
| Temperature Range for SAE Viscosity Numbers | ||
|
Temperature |
°C | -30 -20 -10 0 10 20 20 30 40 50 |
| (°F) | ||
| Smartstream G3.5 GDI | 0W20 | |
NOTICE
- Always be sure to clean the area around any filler plug, drain plug, or dipstick before checking or draining any lubricant. This is especially important in dusty or sandy areas and when the vehicle is used on unpaved roads. Cleaning the plug and dipstick areas will prevent dirt and grit from entering the engine and other mechanisms that could be damaged.
- Never add any additives to the engine oil. Engine oil additives can change the properties of engine oil and may cause serious engine failure.
Information
Useful Links:
2024 Hyundai PALISADE Specs, Price, Features, Mileage and Review