Peugeot 3008 2021-2022 User Manual

The Peugeot 3008, which will be on the market in 2021, is a small SUV with a great mix of style, flexibility, and high-tech features. The 3008 meets the needs of current drivers with its sleek look, roomy interior, new technology, and efficient performance. The Peugeot 3008 has a bold and modern look from the outside. It looks powerful and sure of itself on the road thanks to its big front face, expressive LED headlights, and smooth lines. The curved body and aerodynamic features not only make it look better, but also help it use less gas and handle better. The 3008 stands out from its competitors because of how well it is designed and made. Inside, the Peugeot 3008 has a refined and comfy interior. It has enough room for both front and back passengers and can fit up to five people. The inside is made with high-quality materials and elegant touches, giving it a rich and welcoming feel. The comfortable seats and well-thought-out design make driving a fun and relaxing experience.

Eco-driving

Eco-driving refers to a range of everyday practices that allow the motorist to optimise the vehicle’s energy consumption (fuel and/or electricity) and CO2 emissions.

Optimise your use of the gearbox
With a manual gearbox, move off gently and change up promptly. While accelerating, change up early.
With an automatic gearbox, favour automatic mode. Do not depress the accelerator pedal heavily or suddenly.
The gear shift indicator prompts you to engage the most suitable gear. Whenever this indication is displayed on the instrument panel, follow it straight away.
With an automatic gearbox, this indicator appears only in manual mode.

Drive smoothly
Maintain a safe distance between vehicles, use engine braking rather than the brake pedal and press the accelerator gradually. These practices help to save on energy consumption, reduce CO2 emissions and decrease general traffic noise. When the traffic is flowing smoothly, select the cruise control.

Control the use of electrical equipment
Before moving off, if the passenger compartment is too warm, ventilate it by opening the windows and air vents before using the air conditioning. At speeds above 31 mph (50 km/h), close the windows and leave the air vents open. Consider using equipment that can help keep the temperature in the passenger compartment down (e.g. sunroof blind, window blinds). Unless automatically regulated, switch off the air conditioning as soon as the desired temperature has been reached. Switch off the demisting and defrosting functions, if they are not managed automatically.
Switch off the heated seat as soon as possible. Adapt your use of the headlamps and/or foglamps to the level of visibility, in accordance with current legislation in the country in which you are driving.
Avoid running the engine before moving off, particularly in winter (other than in severe wintry conditions: temperature below -23°C). The vehicle will warm up much faster while driving. As a passenger, avoid connecting your multimedia devices (e.g. film, music, video game) to help reduce the consumption of energy. Disconnect all portable devices before leaving the vehicle.

Limit the causes of excess consumption
Spread loads throughout the vehicle. Place the heaviest items in the boot as close as possible to the rear seats.  Limit the loads carried in the vehicle and minimise wind resistance (e.g. roof bars, roof rack, bicycle carrier, trailer). Preferably, use a roof box. Remove roof bars and roof racks after use. At the end of winter, remove snow tyres and refit summer tyres.
Avoid using the Dynamic Pack for too long, in order to limit your energy consumption.

Comply with the servicing instructions
Check tyre pressures regularly, with the tyres cold, referring to the label in the door aperture on the driver’s side.

Carry out this check in particular:

1. before a long journey.
2. at each change of season.
3. after a long period out of use.

Do not forget the spare wheel and, where applicable, the tyres on your trailer or caravan. Have your vehicle serviced regularly (e.g. engine oil, oil filter, air filter, passenger compartment filter, etc.). Observe the schedule of operations in the manufacturer’s service schedule. With a BlueHDi Diesel engine, if the SCR system has a fault, your vehicle will emit pollution. Visit a PEUGEOT dealer or a qualified workshop
as soon as possible to restore your vehicle’s nitrogen oxide emissions to legal levels. When filling the fuel tank, do not continue after the third cut-out of the nozzle, to avoid overflow.
You will only see the fuel consumption of your new vehicle settle down to a consistent average after the first 1,900 miles (3,000 kilometres).

Optimising the driving range (rechargeable hybrid vehicles)
Connect the vehicle as soon as possible. Favour the ECO zone of the power indicator by driving smoothly and at a steady speed. Anticipate slowing down as much as possible and, if possible, favour decelerations with regenerative braking mode activated (power indicator in the CHARGE zone). With the vehicle connected, carry out temperature pre-conditioning before setting off.

To optimise consumption during a journey:

1. Programme a destination in the vehicle’s GPS navigation system.
2. Select the Hybrid driving mode.
3. Make sure that the battery charge level is close to maximum.
4. Do not use the e-Save function while driving.
5. Use the heating/air conditioning system wisely.

Head-up digital display
This digital instrument panel can be customised. Depending on the display mode selected, certain information is hidden or presented differently. Example with the “DIALS” display mode:

1. Fuel gauge
2. Analogue speedometer (mph or km/h)
3. Gear shift indicator
   Selector position and gear engaged on automatic gearbox
4. Digital speedometer (mph or km/h)
5. Cruise control or speed limiter settings Display of speed limit signs
6. Rev counter (x 1,000 rpm)
7. Engine coolant temperature indicator (°C)
8. Trip distance recorder (miles or km)
9. Total distance recorder (miles or km)
   1. Instrument panel ambient lighting on/off
   2. Short press: start a manual test
      Long press: reset the service indicator or trip distance recorder (depending on the context)

Head-up digital display (Rechargeable hybrid)
This digital instrument panel can be customised. Depending on the display mode selected, certain information is hidden or presented differently. Example with the “ÉNERGIE” display mode:

1. Fuel gauge and remaining range (miles or km)
2. Digital speedometer (mph or km/h) READY indicator lamp
3. Status of the gearbox
4. Energy flows
5. Driving mode selected
6. Power indicator
7. Battery charge level and remaining range (miles or km)
8. Trip distance recorder (miles or km)
9. Total distance recorder (miles or km)
   1. Instrument panel ambient lighting on/off
   2. Short press: start a manual test
      Long press: reset the service indicator or trip distance recorder (depending on the context)

Displays
Most warning and indicator lamps do not have a fixed position.
The warning and indicator lamps in the second line are displayed from right to left in order of priority.
For certain functions that have indicator lamps for both operation and deactivation, there is only one dedicated location.

Permanent information
In the standard display, the instrument panel shows:

1. in fixed locations:
   1. Information related to the gearbox and gear shift indicator.
   2. Fuel gauge.
   3. Coolant temperature indicator (Petrol or Diesel).
   4. Charge level and range indicator (Rechargeable hybrid).
   5. Distance recorders.
2. in variable locations:
   1. Digital speedometer.
   2. Status or alert messages displayed temporarily.

FAQ