Auto User Guide

Cadillac XT6 2022 User Guide

Cadillac XT6 2022-Featured

LOGO

Cadillac XT6 2022 User Guide

The Cadillac XT6 2022 is a three-row SUV with a high-end look and a lot of space. It blends luxury, versatility, and performance in a single package. The XT6 jumps out thanks to its unique design and attention to detail. It has a strong, authoritative look. This SUV has a powerful engine that gives it exhilarating speed while still getting great gas mileage. The interior of the XT6 is elegant and well-thought-out. It has plenty of room for people and cargo and is made of high-quality materials and has the latest technology to improve the driving experience. The XT6 gives you peace of mind on every trip thanks to its many new safety features and driver-assistance technologies. The Cadillac XT6 2022 is the perfect vehicle for a family trip or a night out on the town. It has a perfect mix of style, comfort, and functionality.

Instrument Panel Overview

  1. Air Vents 0 213.
  2. Exterior Lamp Controls 0 139. Turn Signal Lever. See Turn and Lane-Change Signals 0 142. IntelliBeam System Button (If Equipped). See Exterior Lamp Controls 0 139.
  3. Instrument Cluster 0 109. Driver Information Center (DIC) Display. See Driver Information Center (DIC) 0 124.
  4. Windshield Wiper/Washer 0 102. Rear Window Wiper/Washer 0 104.
  5. ENGINE START/STOP Button. See Ignition Positions 0 231.
  6. Park Assist Button. See Park Assist 0 281. Automatic Parking Assist (APA) Button. See Park Assist 0 281.
  7. Stop/Start Disable Switch. See Stop/Start System 0 233.
  8. Light Sensor. See Automatic Headlamp System 0 141.
  9. Hazard Warning Flashers 0 142. Lane Keep Assist (LKA) 0 298 (If Equipped).
  10. Infotainment Controls. See Overview 0 147.
  11. Heated and Ventilated Front Seats 0 46 (If Equipped).
  12. Dual Automatic Climate Control System 0 206.
  13. MODE Switch. See Driver Mode Control 0 248. Traction Control/Electronic Stability Control 0 247.
  14. Infotainment Controls. See Overview 0 147.
  15. Shift Lever. See Automatic Transmission 0 238.
  16. Steering Wheel Controls 0 101.
  17. Steering Wheel Controls 0 101. Driver Information Center (DIC) Controls. See Driver Information Center (DIC) 0 124.
  18. Horn 0 102.
  19. Steering Wheel Adjustment 0 101 (Out of View).
  20. Forward Collision Alert (FCA) System 0 287 (If Equipped). Heated Steering Wheel 0 101 (If Equipped).
  21. Cruise Control 0 250. Adaptive Cruise Control (Advanced) 0 252 (If Equipped).
    Phone Button. See Steering Wheel Controls 0 101.
  22. Data Link Connector (DLC) (Out of View). See Malfunction Indicator Lamp (Check Engine Light) 0 115.
  23. Hood Release. See Hood 0 320.
  24. Head-Up Display (HUD) 0 127 (If Equipped).
  25. Instrument Panel Illumination Control 0 143.
  26. Electric Parking Brake 0 245.

Keys and Locks

Leaving children in a vehicle with a Remote Keyless Entry (RKE) transmitter is dangerous and children or others could be seriously injured or killed. They could operate the power windows or other controls or make the vehicle move. The windows will function with the RKE transmitter in the vehicle, and children or others could be caught in the path of a closing window. Do not leave children in a vehicle with an RKE transmitter.

Remote No Longer in Vehicle

If the vehicle is on with a door open, and then all doors are closed, the vehicle will check for RKE transmitters inside. If an RKE transmitter is not detected, the Driver Information Center (DIC) will display NO REMOTE DETECTED and the horn will chirp three times. This occurs only once each time the vehicle is driven. To turn on or off, see Vehicle Personalization 0 130.

Programming with Recognized Transmitters

  1. Place the two recognized transmitters in the cupholder.
  2. Remove the key lock cylinder cap on the driver door handle. See Door Locks 0 16. Insert the vehicle key of the transmitter into the key lock cylinder on the driver door and turn the key counterclockwise, to the unlock position, five times within 10 seconds. The DIC displays READY FOR REMOTE #3, 4, 5, ETC.
  3. Place the new transmitter into the transmitter pocket. The transmitter pocket is inside the center console storage area between the driver and front passenger seats. The storage area will need to be opened and the storage tray lifted up to access the transmitter pocket.
  4. Press ENGINE START/STOP. When the transmitter is learned the DIC display will show that it is ready to program the next transmitter.
  5. Remove the transmitter from the transmitter pocket and press the transmitter K or Q button.
    To program additional transmitters, repeat Steps 3–5. When all additional transmitters are programmed, press and hold ENGINE START/STOP for 12 seconds to exit programming mode.
  6. Return the key back into the transmitter.
  7. Replace the key lock cylinder cap. See Door Locks 0 16.

Programming without Recognized Transmitters

  1. Remove the key lock cylinder cap on the driver door handle. See Door Locks 0 16. Insert the vehicle key of the transmitter into the key lock cylinder on the driver door handle and turn the key counterclockwise, to the unlock position, five times within 10 seconds.
    The DIC displays REMOTE LEARN PENDING, PLEASE WAIT.
  2. Wait for 10 minutes until the DIC displays PRESS ENGINE START BUTTON TO LEARN and then press ENGINE START/STOP.
    The DIC display will again show REMOTE LEARN PENDING, PLEASE WAIT.
  3. Repeat Step 2 two additional times. After the third time all previously known transmitters will no longer work with the vehicle. Remaining transmitters can be relearned during the next steps. The DIC display should now show READY FOR REMOTE # 1.
  4. Place the new transmitter into the transmitter pocket. The transmitter pocket is inside the center console storage area between the driver and front passenger seats. The storage area will need to be opened and the storage tray lifted up to access the transmitter pocket.
  5. Press ENGINE START/STOP. When the transmitter is learned the DIC display will show that it is ready to program the next transmitter.
  6. Remove the transmitter from the transmitter pocket and press the transmitter K or Q button. To program additional transmitters, repeat Steps 4–6.
    When all additional transmitters are programmed, press and hold ENGINE START/STOP for 12 seconds to exit programming mode.
  7. Return the key back into the transmitter.
  8. Replace the key lock cylinder cap. See Door Locks 0 16.

Battery Replacement

WARNING:
Never allow children to play with the RKE transmitter. The transmitter contains a small battery, which can be a choking hazard. If swallowed, internal burns can occur, resulting in severe injury or death. Seek medical attention immediately if a battery is swallowed.
To avoid personal injury, do not touch metal surfaces on the RKE transmitter when it has been exposed to extreme heat. These surfaces can be hot to the touch at temperatures above 59 °C (138 °F).

CAUTION:
When replacing the battery, do not touch any of the circuitry on the transmitter. Static from your body could damage the transmitter. Always replace the battery with the correct type. Replacing the battery with an incorrect type could potentially create a risk of battery explosion. Dispose of used batteries according to instructions and local laws. Do not attempt to burn, crush, or cut the used battery, and avoid exposing the battery to environments with extremely low air pressures or high temperatures.
If the RKE transmitter is not reassembled properly, liquids could enter the housing and damage the circuitry, resulting in an RKE transmitter malfunction and/or failure. To prevent damage, always follow the steps for RKE transmitter reassembly in this manual to ensure the transmitter is sealed properly whenever the RKE transmitter is opened.

REPLACE THE BATTERY IN THE REMOTE KEY.

  1. Press the button on the side of the RKE transmitter near the bottom and pull the key out. Never pull the key out without pressing the button.
  2. Separate the two halves of the transmitter using a flat tool inserted into the bottom center of the transmitter. Do not use the key slot.
  3. Remove the old battery. Do not use a metal object.
  4. Insert the new battery on the back housing, the positive side facing down. Replace with a CR2032 or equivalent battery.
  5. Ensure that the silicone mat is correctly positioned with no gaps or wrinkles.
  6. Set the transmitter button side down on a hard surface and press the other half straight down to force the halves together.
  7. Reinsert the key.

Reference Links

Download Manuals: https://www.cadillac.com/support/vehicle/manuals-guides

Scroll to Top